This was posted 8 months 11 days ago, and might be an out-dated deal.

Related
  • out of stock

DISKAD (Rebranded Bosch Series 6/8) Integrated Dishwasher $319 ($287 IKEA Family Price) + Delivery ($0 C&C) @ IKEA In-store Only

4150
DISKAD (Rebranded Bosch Series 6/8) Integrated Dishwasher $319 ($287 IKEA Family Price) + Delivery ($0 C&C) @ IKEA In-store Only
Go to Deal
MagicMushroom on 06/06/2024 - 21:53 ikea.com (28792 clicks)
Last edited 13/06/2024 - 17:21 by 3 other users

Not sure if this is price error, but regular price wasn't $319 from vague memory. Google search shows as $1599.

Manufacturer number for this product is 23320, which is made by Bosch as per Ikea Belgium website.

Not sure about specific model, but Bosch only makes fully integrated dishwasher for series 6 and 8, which cost $1000 and up.

Deactivated user mentioned it's similar to Series 8 SMV88TX02A

tonester mentioned "IKEA integrated PROFFSIG and DISKAD are rebranded Series 6 and 8 respectively"

Found this thanks to O O's comment on Insufficient Quantity Deals

Electrical & Electronics Dishwasher

Related Stores

IKEA
IKEA

closed Comments

          • keejoonc on 15/06/2024 - 19:51

            @johnjones8: Yeah I had to make an ugly cut with multi tool to fit it through the hole.
            Couldn't finish the door as I didn't have drill bit to drill through the stainless steel on the varsta front door panel.

  • nguyentran on 15/06/2024 - 15:45

    Hi folk, I have a spare one as my parents just bought a new series 6 without telling me lol. In Brisbane if any one is interested :)

    • Justbuy on 15/06/2024 - 16:03

      I want pls

    • cnut on 16/06/2024 - 00:38
      +1

      Do you want my username? It would suit you better.

  • johnjones8 on 15/06/2024 - 18:16
    +2

    In case someone in Brisbane doesn't care about getting a brand-new sealed one: there was a single open-packaged one inside the 2nd hand as-is stock area at the Logan ikea for $250 when we stopped by this arvo to pick up the door panel. Cord was inside the original packet so maybe someone couldn't make it fit under their kitchen bench?
    Also an otherwise-pristine white 60x80cm Veddinge door panel there as well but unfortunately with a long narrow chip near the top(bottom?) edge on the front.

    • Benvestor on 16/06/2024 - 17:15

      Just picked this one up, minor scratches along the outside and along the sides. Looks like it didn't fit on the width - but they already started the installation process on the front of the dishwasher.

      We were told they were all out of the new versions, and it was uncertain when the next shipment would be in, but there might be one in the 2nd hand section - voilà, there it was.

      Ultimately I'd rather pay $250 for one with some scuffs and dings, than miss out and have no dishwasher at all.

      • eug on 16/06/2024 - 17:16

        I'm surprised it was there for so long!

  • Dollar Dreamer on 15/06/2024 - 23:14
    +1

    More Sydney Scalpers at it, between $450-$500, at least Sydney scalpers are not as bad as that Brisbane guy listing his for $950 lol.

    https://www.facebook.com/marketplace/item/998196464695621/?r…

    https://www.facebook.com/marketplace/item/313382815159572/?r…

    • ozvictor on 15/06/2024 - 23:18

      People are not willing to pay a high price so it force scalpers to drop the price. 99% people don’t know this dishwasher is Bosch unless they read this post

      • cnut on 16/06/2024 - 00:41

        99% of Australia knows about this deal by now. 🤣

  • nicholastyc on 16/06/2024 - 02:00

    By the way, just installed the dishwasher.

    Found out the dishwasher has no clock (time )setting.

    You only can delay it. But can't set it to start at a certain time.

    What a top of the range dishwasher Bosch is making it.

    • Dollar Dreamer on 16/06/2024 - 09:23

      Think of it as build quality over tech and features. Eg. Speed Queen washing machines. A Speed Queen washing machine can cost $3500 - $9,000 and you will get 2 analogue knobs and often no screen / no fancy wash programs or features. Very minimal electronics to make it last for decades. Just 2 knobs to start wash cycle, end wash cycle.

      • Ryanmyo on 16/06/2024 - 21:33
        +2

        First (and for days..) it was an over priced 2018 model with no transferable warranty, now it's a no fills Speed Queen! 🤫

        Tis neither…

        • Dollar Dreamer on 16/06/2024 - 22:50
          +1

          At $1599, it was an overpriced 6 year old dishwasher released in 2018. At $319, it's a high quality Bosch.

    • eug on 16/06/2024 - 09:34

      What a top of the range dishwasher Bosch is making it.

      This is not Bosch's top of the range dishwasher, it's a hybrid of the Series 6 and 8 which Ikea commissioned.

      This is their top of the range dishwasher.

      The control panel has a screen on it where you set the time. Rather than set the start time you set the end time.

      It also has WiFi so you can control it remotely or by saying OK Google start the dishwasher.

      There is also a Home Assistant integration so you could theoretically set it up to automatically run when you get free electricity or your solar power generation is at its peak, or by pressing a physical remote control button.

  • YadaYadaYada on 16/06/2024 - 09:17
    +3

    There’s 45 in stock in Logan showing up in the app right now if anyone needs one in Brisbane.

    • rushil01 on 16/06/2024 - 09:54

      How are you able to view it in the app? I can't see it unfortunately :(

      • YadaYadaYada on 16/06/2024 - 09:55

        I have it saved onto a wish list from when it was available.

        • johnjones8 on 16/06/2024 - 11:16

          Yeah for some reason they decided not to added it back onto the website despite stock still coming in?

    • Section2 on 16/06/2024 - 10:11

      Thanks, just ordered one for pick up tomorrow

    • megaphat09 on 16/06/2024 - 12:33

      Just bought mine from logan and there is a sweet old man working the order desk (just past the self serve checkouts), management has warned him that he'll be getting lots of requests for these. Good luck everyone.

  • keejoonc on 16/06/2024 - 12:14

    Is salt required? Getting conflicting information.

  • pancaeks on 16/06/2024 - 12:45

    I was added to a waitlist last week and the rep emailed me today letting me know I could come in and grab it. Thanks everyone!

  • zekoo on 16/06/2024 - 14:10

    Hi All ,

    The links is gone , not sure how his deal can still be accessed via app backend.

    I was checking the perth stock on the chat they were not helping , just said keep checking the web none in store .
    Also the article disappeared from site .

    I really need a dishwasher and this price is a steal.

    • b3au on 16/06/2024 - 14:26
      +2

      Pop the IKEA app on your phone / tablet (have personally tested with both an IPhone and an iPad), and try this link
      https://ingka.page.link/o87vjDB9sYuzGMon9

      It should open the IKEA app to the Dishwasher page so you can see the online stock info.

      • zekoo on 16/06/2024 - 15:50

        Thanks Mate ,

        Much appreciated for taking the time to share the link.

        I tried it on iphone shows dishwasher other brand stock , but not DISKAD , have to wait until link appears back on site .

        Update # Tried again and its showing now with no stock
        Will keep trying until comes available.

        You’re Legend mate .

  • Randomderp on 16/06/2024 - 15:35

    Can anyone share photos of theirs installed? Also anyone remember the depth of the unit?

    • spc12go on 16/06/2024 - 15:48

      55cm depth

    • pancaeks on 16/06/2024 - 15:49

      Assembled size

      Width 59.8 cm
      Depth 55.0 cm
      Height 86.5 cm
      Max. installation height 92.5 cm
      Min. installation height 86.5 cm
      Cord length 175.0 cm
      Weight 48.00 kg

    • tbone74 on 16/06/2024 - 15:50

      Dimensions and clearances are in the installation guide

      • cnut on 16/06/2024 - 17:48

        Do you need the special kit if your cavity is 610cm wide for example?

        • Crimzic on 16/06/2024 - 20:04

          You may need to fill that extra width with some wooden plank.
          However, if it's only 610 mm, you may be fine. The dishwasher has white rubber "wings" along the sides, about 5mm each, that may cover it. Though the door gaps will be pretty wide :-)

        • Randomderp on 18/06/2024 - 18:47

          what special kit ?

          • cnut on 18/06/2024 - 22:56

            @Randomderp: Page 13 of the manual shows a couple of brackets if you have between 608 and 620 gap.

  • Zoner1 on 16/06/2024 - 16:10

    Height sizing is pretty firm.

    My space was 860mm with the floorboards. Had to pull the floorboards and also unclipped the panel sides from the dishwasher, including the screw in the front to hold them, (bare sides looks like the top now) and removed the plastic brackets on the corners and got it in there just.

    • Section2 on 16/06/2024 - 16:19

      I might need to do this for my parents place as we are a few mm short, so the sides can come off pretty easy? do you have any photos what it looks like without the sides??

      • Zoner1 on 16/06/2024 - 21:48

        Remove screw at front with door open, about 3/4 of way down, torx T20 I believe.

        They basically pop open and come off downward with a small pry from the back

        Remove the corner plastic pieces at the back by straightening the metal corner folded inside, and hammering off.

        The grey plastic corner bits at the front just lever off, not needed even when running the front fascia.

        No photos but it looks a bit bare, not an issue if you can't see it. Nothing exposed or anything.

        Once front is on, all good

        • Section2 on 16/06/2024 - 22:20

          Thanks, would the white flexible gasket like "wing" remain after removing the side panels? How many mm did u save by removing the sides you think?

          • Zoner1 on 16/06/2024 - 22:47

            @Section2: Side wings come off but top stays on
            Only about half a cm maybe? Enough to get to to squeeze in for me

            • Section2 on 16/06/2024 - 22:57

              @Zoner1: awesome, thanks for sharing your knowledge

              • Zoner1 on 17/06/2024 - 15:05

                @Section2: Was able to refit wings without side panels.

                Used the screw which initially held the side panels on and screwed them back on (through the rubber flap that covers the hole) and tucked the top under the top wing as it originally was.

                • Section2 on 19/06/2024 - 12:23

                  @Zoner1: Was able to take side panels off and squeeze it in with 1mm gap remaining

  • Dollar Dreamer on 16/06/2024 - 18:26

    People buying the default door trims from Ikea (Metod) in white / other colours or getting a cabinet maker to build them one?

    • Zoner1 on 16/06/2024 - 21:53

      Used the VOXTORP door with VAGLIG kit from IKEA

      • eug on 16/06/2024 - 22:05

        Does the VAGLIG add a gap between the door and the dishwasher door?

        • Zoner1 on 16/06/2024 - 22:45

          Maybe 2mm or so from the width of the metal bracket inbetween, I don't notice it

          Sounds like you can get away without needing it though

      • Section2 on 16/06/2024 - 22:26
        +1

        Dont need a VAGLIG kit if you are using just one VOXTORP panel as the dishwasher already come with mounts.

        I got a grey VOXTORP panel (60 x 80) for my own washer and it was pretty easy to install with the supplied mounts as there was a template

  • Randomderp on 17/06/2024 - 15:45

    are you supposed to be be able to see/use the top controls like in this image? https://imgur.com/a/zzppCP4
    trouble with this is i can't secure the unit to the cupboards/draws with it out this far?

    • Section2 on 17/06/2024 - 15:56

      You are suppose to have the whole unit in the cavity as it is an integrated unit.

      You can access the control with the unit opened at an angle. In fact, the buttons dont work when the door is closed like what you have in your picture.

    • Thenhz on 17/06/2024 - 16:26

      No you should not be able to see them, when closed they should be under your bench.

  • Dollar Dreamer on 17/06/2024 - 17:23

    LOGAN Ikea Store shows stock as of 17th June 5.22pm. Call them up to see how many is left.

    • Juice08 on 18/06/2024 - 07:24

      I chatted with them yesterday and she said there's no stock and they weren't expecting any 🤷🏻‍♂️

      • Dollar Dreamer on 18/06/2024 - 11:35

        Maybe they got restocked this morning. Still shows in stock at Logan.

        • bcYield on 18/06/2024 - 16:45

          How do you check stock of them? Mine's still under prepared and not dispatched since.

        • eug on 18/06/2024 - 16:53

          Strange, I had a look yesterday just before 6pm and Logan was showing out of stock. It's still showing as OOS at Logan now. Could your app be displaying a cached value?

  • keejoonc on 18/06/2024 - 00:04
    +1

    used it for the first time today and very happy with it.
    runs very quiet and heaps of space inside.

    • Exprise on 18/06/2024 - 00:08

      Nice! Mine arrived today. Kitchen Reno starting in a month

  • Dollar Dreamer on 18/06/2024 - 09:48
    +1

    Canberra store shows stock in my App as of 18 June 9.47am. Perhaps worth it for Sydney folks to make the trip if they can secure 1 over the phone.

    • Dollar Dreamer on 18/06/2024 - 11:35

      Update: Canberra store 11.35am sold out.

  • vawiyoci on 18/06/2024 - 09:53

    Out of technical curiosity, what is the purpose of the 2 plugs inserted on the sides?

    Also what is the function of the 2x screws below the door? Is it to adjust the stiffness/angle of leaving the door ajar etc?

    • keejoonc on 18/06/2024 - 10:32

      I think the 2 plugs are where you put the screw in from inside the dishwasher to secure it to the side of the cabinets.
      Mine was tipping forward when all trays were pulled out until I did this.

      I don't think the second step you asked about is relevant to this particular model. It's specific only for the PROFFSIG model.

      • vawiyoci on 18/06/2024 - 10:53

        The sidewall screw positions seem a lot higher though?

        Mine was tipping forward when all trays were pulled out until I did this.

        Didn't realise it would be this unbalanced compared to a freestanding model lol.

        It's specific only for the PROFFSIG model.

        Ah my mistake just double checked and proffsig is the one with the auto opening doors.

        • keejoonc on 18/06/2024 - 11:02

          I'm going off my memory here but I didn't think the screw holes were that high up?

          It was slightly below where the cutler tray is located. I could still screw it in without taking the tray out but obviously easier with it out.

          • vawiyoci on 18/06/2024 - 11:40

            @keejoonc: All good guess this might just be a case of them forgetting to put a reference link like they did on some of the other pages.

    • Dollar Dreamer on 28/06/2024 - 19:10

      The 2 bottom side screws (once you remove the side panels with blue tape) is for adjusting the door up and down if you cock up the measurements like i did. It was a life saver as I measured from the top of the adjacent cupboards but you are supposed to measure from the bottom of the kitchen countertop as it's engineered to drop the door 5mm to align with your cabinet doors. So always measure from the bottom of the countertop to get 'Measurement A' on the door panel instructions. You may have to use an alignment ruler with a water bubble to get the door perfectly straight again. I lifted the front panel 5 mm up and it's all sweet now.

  • RichardF89 on 18/06/2024 - 14:17
    +1

    order cancelled again

  • jdawgydawggy on 18/06/2024 - 21:55

    Picked mine up click and collect from Perth today. Thanks OP!

    • Macgyver on 18/06/2024 - 22:12

      How did you manage that? It's been been out of stock for a while

    • rademase on 18/06/2024 - 22:28

      I've been trying for many days since my initial click and collect order was cancelled and refunded about 10 days ago. Have been unsuccessful with various attempts.
      Was told it would be re-stocked in Perth today but still didnt manage to get one through Chat, Phone Call (multiple attempts at different time of the day) even though an agent had given me 'shopping list' yesterday.

      How did you manage to get your order in for Perth??

      • jdawgydawggy on 18/06/2024 - 22:33

        I put in a delivery order about a week ago, and that sat processing for a while. Then with constant refreshing, I saw it back in stock on Sunday, but obly for click and collect, so placed another order.

        Got a text yesterday that my delivery order was cancelled, but then received a text this morning saying my click and collect order was ready for collection!

        Not sure how, i got very lucky!

        • rademase on 18/06/2024 - 22:50

          Nice! Very lucky indeed, or IKEA just didn't want your delivery fee and wanted you to collect it yourself!

          I saw it as available for Click and Collect the past week but the orders never went through. And on phone, they said WA has literally 0 stock and that online/app showing some available for click and collect is incorrect.

          Feel like giving up on this!

          Good luck with yours!

          • Kobe1027 on 19/06/2024 - 10:40

            @rademase: I have been calling and online chat 3 times a day since last week and have always been told there is no stock and stock may come in the next day. Yesterday they have mentioned there will be no stock coming in. I am close to giving up, not sure what else can be done.

            • cnut on 19/06/2024 - 10:55

              @Kobe1027: I noticed in Richmond, they have 2 display models. Worth asking if you can reserve one of those when they take them out.

              • Kobe1027 on 19/06/2024 - 10:55

                @cnut: I would but i'm located in Perth :(

                • cnut on 19/06/2024 - 10:56

                  @Kobe1027: Not familiar with Perth. Have they got a physical store there too?

                  • Kobe1027 on 19/06/2024 - 10:57

                    @cnut: Yeah we got 1 store here, tried everything in the book. Called, messaged and went in all without luck.

                    • cnut on 19/06/2024 - 11:09

                      @Kobe1027: Ask them for the floor stock. They’re bound to be taking those out from display and likely putting them in the returns/seconds/old stock section. See if you can snag it. Might even get a cheaper price.

                      • Kobe1027 on 19/06/2024 - 12:11

                        @cnut: Will try that later today.

                        Thanks!

  • BYONG on 19/06/2024 - 13:04

    Hey guys, anybody knows if this would fit at the back of a Toyota Camry? Thanks!

    • keejoonc on 19/06/2024 - 13:12

      no way. I highly doubt it.

    • cnut on 19/06/2024 - 13:44

      Sedan, nope. Hatchbacks, yes.

    • Dollar Dreamer on 19/06/2024 - 15:01

      You can hire a Van on the cheap at Bunnings for 4 hours

    • pancaeks on 20/06/2024 - 12:59

      Tried it in a corolla sedan and it was a no go.

    • adam on 21/06/2024 - 13:00

      Measured my Toyota Corolla Hatch and it didn't fit

  • Arcanetemplar on 19/06/2024 - 23:55

    Question, I am kinda a newbie to OzBargain; has there ever been a deal as popular as this?

  • Dollar Dreamer on 20/06/2024 - 09:34

    Tempe shows 1 in stock for anyone brave enough to go to the store at 10am and jostle to get it.

  • SuperFred on 20/06/2024 - 10:19

    I managed to get 1 of the 2 from Logan, but there were a dozen people at the store trying to order it this morning.

    The staff mentioned more stock is coming soon. Here are a few tips to help you get one:

    Arrive Early: Go to the store right when it opens.
    Avoid the Kiosk: Don't use the kiosk machines to order. The Diskad might not appear as an option even if it's in stock.
    Talk to Staff: Head straight to the Kitchen section and speak with a staff member in a yellow shirt. They can place the order for you within 2 minutes.
    No Delivery Option: Don't spend time asking for delivery—it’s not available.
    Pay and Pick Up: Complete your payment and pick up your new dishwasher on the spot.

    • Juice08 on 20/06/2024 - 10:35
      +1

      How did you know there were 2? It's a bummer because I genuinely need a new washer but don't live close enough to go in regularly on a whim.

      Although I recently got Bosch washer and dryer and have had more issues in 18 months than in 18 years of my old LG washer …

      Sure 5 year warranty is good but claiming it and dealing with repairs is a nightmare.

      • SuperFred on 20/06/2024 - 17:07

        You can call the store to ask about it, generally they would be able to check it for you :)

    • Kobe1027 on 20/06/2024 - 23:08

      Hi Era, how much? And where are you located?

    • rademase on 21/06/2024 - 09:59

      I'll be interested if still available. PM me with more info please

  • thisismee on 21/06/2024 - 14:49

    So which actual model bosch is this?

Login or Join to leave a comment
Login Join