Sunlu 3D Printer Filaments - Buy 5, Get 3 Free: 8x 1kg PLA $101.86 ($99.47 eBay Plus) Delivered @ SUNLU eBay

130
Sunlu 3D Printer Filaments - Buy 5, Get 3 Free: 8x 1kg PLA $101.86 ($99.47 eBay Plus) Delivered @ SUNLU eBayAffiliate
Go to Deal
Cashback
Switchblade88 on 10/07/2024 - 10:37 ebay.com.au (492 clicks)
TJULY15TJULY17
This post contains affiliate links. OzBargain might earn commissions when you click through and make purchases. Please see this page for more information.

Original Coupon Deal

Very similar to https://www.ozbargain.com.au/node/855229, but with the additional quirk that you can mix & match from several different listings to get the variety and best prices for each. $12.43 per roll delivered is absurdly cheap (sorry Sidd!)

NOT ALL LISTINGS HAVE THE SAME ITEMS FOR THE SAME PRICE!

For example, the wood filament here is $37.83, but the wood filament here is $29.91 and they are BOTH eligible for the combo deal. You need to check all the listings if there are better double-ups.

I managed to get a wide variety of fancy filaments including a marble, wood, TPU, and some dual colour ones for about $120 delivered which unlike the 'Sunlu_Official' store will happily do free delivery to my rural address without a fuss, and they all still sent from the same 'G2/391 Park Road, Regents Park NSW, Australia' address as their other seller accounts.

You'll know the deal applies when your cart changes from 'save up to 30%' to 'Buy 5 get 3 free'. I think it only works with exactly 8 rolls in cart; more and it will swap back to the lesser 30% off.

Electrical & Electronics 3D Printer Filament

Related Stores

eBay Australia
eBay Australia
Marketplace
SUNLU
SUNLU

Comments

  • iLikeBargainz on 10/07/2024 - 10:40

    Deal not for PLA+ :/

    • Switchblade88 on 10/07/2024 - 10:47
      +1

      PLA+ is here

      The OzB link should show the 11 listings, PLA+ has it in the image so it's clear

  • Jimothy Wongingtons on 10/07/2024 - 10:43
    +4

    oh..i shouldnt

    …ah what the hell why not

    • Planky on 10/07/2024 - 11:08

      How much did you buy through the other post a d this one now? Lol

      • Jimothy Wongingtons on 10/07/2024 - 11:38
        +2

        nah i didnt buy any in that post, didnt have enough to make up 10 (i have over 30 rolls as is…)
        but the sunlu dual colour ones look great

        • aragornelessar on 10/07/2024 - 13:36
          +1

          Sunlu dual silk is my go to for the kids stuff now - you can see the colour transition for fidget toys and the like much better than the rainbow (which takes much longer to transition colours)

          • impoze on 10/07/2024 - 15:32
            +1

            @aragornelessar: looking forward to doing some dual silks, just did my first rainbow print yesterday and can definitely see the appeal for kids stuff

    • furythree on 10/07/2024 - 15:14

      bro i havent even bought the pritner yet and already window shopping for filament lol

      • Jimothy Wongingtons on 10/07/2024 - 15:18

        eh put it this way, if you definitely getting a printer, you're gonna need filament one way or another.
        though i will say if you havent got printer yet, might be worth hanging out for a 20% off code instead.

        amazon prime day period next week - i would be surprised if ebay did not do something to try and combat it

        • furythree on 10/07/2024 - 15:26

          oh very true

          ill wait a week then

  • aragornelessar on 10/07/2024 - 10:52
    +1

    Thanks OP! I hate how there's so much variation in pricing and differences in deals (Eg Buy 6, 4 free / buy 5, 3 free) so appreciate this find!

    • Switchblade88 on 10/07/2024 - 11:05
      +1

      After looking at the pricing in the other deal I realised that Sunlu were playing Jack with their own pricing, assuming you wouldn't shop around between their own listings. Glad to help!

  • Planky on 10/07/2024 - 11:07
    +1

    I actually mixed and matched a bunch last night but didn't think to post it. Got pla+, matte and silk. Thanks op.

  • MBix on 10/07/2024 - 11:13
    +1

    Added 6 Dual/Tri Colour silks and two PLA’s to cart but couldn’t get it to switch over to Buy 5 Get 3. Likely user error. Not too much of an issue will just add a couple more silks and do another other for PLA’s. $8.98 delivery to Perth, still solid!

    Thanks OP

  • BargainBogan99 on 10/07/2024 - 11:14
    +1

    Ended up getting buy 3 get 2 free! Also stacks with ebay plus 17% discount.
    Thanks OP

    • MBix on 11/07/2024 - 17:27

      Hey mate, what did you add to get Buy 3 get 2 free to pop? Cheers

  • upliftcontrol on 10/07/2024 - 11:16
    +1

    Thanks for this! It's a good excuse for me to try some of the 'novelty' colours!

  • bboz on 10/07/2024 - 11:22

    $15.42 is the cheapest I seem to be able to get PLA/PLA+ white for :(
    This includes a $8.98 delivery fee.

    BTW, how do you find deals such as this on eBay? Are you somehow registered with the seller?

    • Switchblade88 on 10/07/2024 - 11:30
      +1

      Nah, I just saw the other deal yesterday and shopped around for similar Sunlu seller accounts that would actually ship to me.

      Once you're on a seller's store page like this, you can click the 'Sale' tab near their About and Feedback tabs and it shows you their various sales; these specific sales don't clash with the eBay-wide codes so you can double-up on the discounts in a sense.

      You could also try the 'Sunlu-Shop' seller to see if those listings have better value or free shipping for you.

      • bboz on 10/07/2024 - 11:38
        +1

        ok cool cheers

  • Mel-waukee on 10/07/2024 - 11:27

    I wish this deal had come out earlier.

    • Switchblade88 on 10/07/2024 - 11:31
      +1

      Buy EVEN MORE FILAMENT and use dollar-cost averaging to nullify your remorse!

      • Planky on 10/07/2024 - 12:06

        Bye bye tax refund!

  • impoze on 10/07/2024 - 12:48

    oo interesting..

    Another 8 rolls incoming

    The duo/triple look great.

    One of the listings has the triple at $52 so make sure to get it from the other listing.

  • nguyta on 10/07/2024 - 13:49

    I've primarily been using eSUN PLA+ and silk on a BL P1S.

    How does the Sunlu PLA and silk go? Does anyone have any experiences they'd like to share?

    • impoze on 10/07/2024 - 15:30

      I and many others on here have had no issues with the Sunlu & JAYO filaments,

      meta, matte & silks

  • Yekul on 10/07/2024 - 15:52

    Does the wood PLA require a hardened nozzle? Or is it different to the regular 'wood' type filaments and just a look alike PLA so to speak?

    • impoze on 10/07/2024 - 16:01

      Yes, it's abrasive so hardened nozzle.

      What printer are you using?
      Worth doing anyway since it opens you up to using other filaments like marble, glow in the dark

    • aragornelessar on 11/07/2024 - 19:00

      I picked up some wood as I've always wanted to try printing some wood look stuff. Arrived today and it just looks like a light brown… so it'll be interesting to see how it comes out. I thought it would look like the marble does - with specks that resemble the marbling/wood grain, but its just a plain light brownish colour from the outside of the roll

      • impoze on 11/07/2024 - 19:29

        I got one roll as well, I think it's a fine texture

        https://www.sunlu.com/collections/wood

        • aragornelessar on 11/07/2024 - 22:48

          Yeah it looks like some sort of grain/roughness in the pics, but it just looks smooth in the packaging I got.. will have to wait and see. At this price though it's same as regular PLA so I'll just use it as a light brown if there's no grain look

          • impoze on 12/07/2024 - 00:01

            @aragornelessar: Yeah, I had another look at the roll as well and it definitely doesn have wood grain look.

            • aragornelessar on 14/07/2024 - 20:41

              @impoze: So I did print last night with the Sunlu wood filament using generic PLA settings, external to the AMS as I knew it'd be abrasive and don't see any graining - just looks like a light brown unfortunately. I don't feel any more of a wood texture vs plastic texture either.

              Noticed a burning smell when I went in there to grab the print though and upon further research (which I probably should've done beforehand haha), its likely to have wood filament in there and burn if you don't extrude the remaining filament at the end - as the heat in the nozzle will burn the wood fibers.

              Something to keep in mind when you use yours in case you hadn't looked into it!

  • aragornelessar on 11/07/2024 - 09:53
    +1

    Got my delivery in less than 20 hrs to south-west Syd… unfortunately wife has now seen it and banned me from more filament. "If you can't fit it on the shelf, you can't buy it"… guess I need a bigger shelf/print more stuff!

    • impoze on 11/07/2024 - 10:41

      Nice, mine being delivered today together with the Jayo order.

  • impoze on 11/07/2024 - 14:40

    Received and unboxed. The dual & triple silks look great.

    Two of the rolls are on dark blue reusable spools compared to the usual black spools.

    I wonder if they will be stocking refills soon then

    • impoze on 13/07/2024 - 10:47
      +1

      For bambu usersn the reusable spools fit the AMS lite

      https://www.reddit.com/r/BambuLab/s/SN6NPeQ1CJ

      • aragornelessar on 14/07/2024 - 11:05

        I got some spools on marble filament that look like that blue one, but mine's clear.. wonder if its the same.. doesnt have the 'detachable and reusable' label on it though. The rest were the older black spools.

Login or Join to leave a comment
Login Join