Specification:
Model: ATOMSTACK X20 PRO
Recommend Print Size: 400x400mm
Carving Objects:Wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective, Electroplating layer and paint surface layer metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, slate;
Cutting Objects:Cardboard, non-woven fabric, wood board, acrylic, some thin plastic board, sponge;
Machine Power: 130W
Laser power: 90W
Laser output power: 20-21W
Wave Length: 445 ± 5nm
Engraving accuracy: 0.01mm
Focusing method: fixed focus laser, no need to focus
Laser protective cover: Protect the user's eyes and prevent pets from grabbing the laser spot.
Operating software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system.
Input Format: NC, BMP, JPG, PNG, DXF, etc.
Data transmission method: USB connection.
Input Voltage: AC100-240V, 50/60Hz
Output Voltage: DC12V, 5A
Package Size: 57 x 52 x 18cm/22 x 20.4 x 7in
Package Weight: 10.6kg/23.3lb
ATOMSTACK X20 Pro 20W Laser Engraver / Cutter with Air Assist Accessory US$609 (A$922.64) Shipped @ Tomtop
Last edited 25/06/2023 - 19:16 by 1 other user
Related Stores
closed Comments
Different power output.
Cheapest I could see on AliExpress was around $980 after a $30 off coupon.
That’s the price for a 50w laser head. Not the whole machine
If you're looking for a laser cutter/engraver, go for an ortur machine. Lots of support and forums online. In the same price range as this.
I have the x20 and it's been a good machine. To be honest I looked at all the brands before I purchased and they are all pretty much the same (when comparing like for like power), so think just get the best deal you can.
Looking at possibly getting one to start, before I throw a grand at something I may get bored of in a month anything to consider? I've read a little bit but personal thoughts if you've got some experience?
Yeh, definitely not a bargain! Thank you for posting though OP.
Not really sure if this is a bargain or not.
I found the same model on AliExpress for $458 inc shipping.
Am I missing something?