Cheapest historical price on Amazon (as per Camelx3) and $2 more than the AZAU deal from Jan 2022
About this item:
- Fits most 17" to 27" displays
- Supports monitor weights from 2-9 kg
- VESA compliant 75 x 75, 100 x 100 mm
- Upright lift distance 260mm
- Rotation 360° and Swivel 180°+
CamelCamelCamel.
This. Have three. Sure I’d love human scale M2s but needs vs. wants.
Same and same.
Handles my 34" uwd no dramas.
Will it do a 38?
Is it worth having two of these opposed to one dual monitor mount? What about if I want to drill a hole in my table - I'd like to keep monitor against wall?
i had HB180 before then move to dual F100A for better flexibility
I can also recommend the F100a. It has better flexibility and is more suitable for against walls and deeps desks. I got mine particularly for the longer extension so I can move it in front of my Sim wheel: https://imgur.com/a/KUxwFso
You should check out second hand office furniture stores, I got one with 2 monitor connectors for 9$
why do the M2 mounting need to be bigger?
we have the human scales at work and find that all the white plastic has turned yellow.
I bought the F100 last week, which is also down 11% - Does the job on 27" monitor
If my desk is against a wall, would I need to move the desk forward?
Yes
by how much? should only need enough space for the clamp, the arm itself can't lock to not go further than the wall?
I’ve got one of these just checked. 15 cm clearance to the wall roughly is more than enough for full motion when you’re moving it left to right. I just leave mine as it is but I’m only using one monitor. They do the job not losing your set height and tilt once tightened up. You can have it closer to the wall and just move the arm in front of the clamp
Yes, unless your table has a hole or you drill a hole in your table.
so I bought NB H100 instead. I can put much closer to the wall
Thank you. I’ll look into these
Depending on how you planned to use it. You can install it a little to one side which will allow you to install it up against a wall but it will shift sideways when you lifted it upward or forward.
thats my problem! I an thinking about wall mounting the screen … but havent found a good wall mount yet - I have not much table depth available (45cm)
Depends how you mount it, are you willing to put a hole in the desk?
how would this hole change the mounting ? Is the hole like 10-15cm from the edge so the monitor can be further back?
Installed one for the wife last week and her desk is against the wall, it works fine (just limits the available motion a bit). No downsides really though since she usually isn't moving the monitor anywhere anyway.
No if you align it properly, but it means that the clamping point wont be centered.
bought one and arrived. Then I realize my monitor doesn't support the arm… damn…
You can get VESA adapters.
I never heard about it!!! Thanks!!!
kogans one looks cleaner and the same price for anyone who doesnt want the yellow logo showing.
You can technically peel off the yellow logo, it's just a sticker.
EDIT: I just checked Kogan, and it's $39.99
you can also take the yellow logo off
When will you see the sticker?
When you look at your desk. Source: own one
Depends on your setup. The sticker is very close to the rear of the screen.
@staz: Ah I think you're confusing that sticker with the one on top of the desk clamp. I assume that's what the original commenter meant as you cannot see the one close to the back of the monitor like you said.
looks down at desk top—Can confirm am unable to see monitor
cant speak for kogan ones but these are very very good.
I have 3, currently only use one though.
I used this ever since i had Dell U2407WFP-HC, these used to weigh a lot (about 6.5 kg)
Turns out i actually got the F100a's
Works on my Ultrawide 34" but I had to place playing cards where it clamps to spread pressure a bit more
I was thinking to buy for $39 yesterday but was bit confused if that will work for 34 inch ultra wide samsung. I saw some reviews saying the item was not compatible for samsung monitors.
Therefore, I bought Monitor Arm HEYMIX VESA Mount Gas Spring Adjustable Computer Monitor Stand, Swivel Monitor Arm with 2-Grommet Mounting Base, Black currently selling for $55 - $10 (Amazon offered $10 credit as i requested for cheaper price via chat). Item arrived today and installed, took a bit time to adjust the monitor as it was facing downwards.
Yeah I reckon you made the right choice. The Ultrawide 34" is very much just beyond the limit of this clamp especially when it is pulled far away from its base
at the risk of looking really silly I will ask - where is this "chat" you speak of - did not know you could negotiate on amazon prices?
live chat , depends who the chat rep is. at times it works , not always though. i have bought few items cheaper than advertised price this way.
Picked up the H100 for my Dell 3422DWG.
Can I put a 38 ultrawide?
A bit too heavy,I had used this for 32" Ultra wide Xaiomi
You might if the weight is less than 9 kg.
Does it support curved monitors like iMac?
Check the weight and whether your iMac has vesa mounts (some do, some need an adapter, some don’t)
Can this help to move the monitor forward and backwards?
As in bring it closer to you and pushing it away? yes.
You can lock the up and down tilt if you want.
I have this with the Xiaomi 34" ultrawide, its good, but find i need a bit of additional height.
Does anyone have any recommendations on what would suit best to give additional height? The F100 or H100?
Much of a muchness height wise between the two. F100A goes to 530 mm and H100 goes to 550 mm.
will this support Dell P series with VESA (there is a gap between outer of the monitor and VESA mount)
It does, I have two of this monitor arms and they fit well with both 27" Dell U and P series monitors
thanks mate!
Works great with Dell S2721Q.
Would this allow me to have a 27inch monitor above a 34inch ultra wide? (If the ultra wide was on the desk)?
Alienware one
Nope
You might look to get a free standing monitor stand for the 27”.
Waiting for a deal of dual monitor arms
Better get 2 singles. Thank me later
you're better off with 2x singles than a dual
thanks guys, ended up going to 2 x the F100A, as they also tilt!
Don't see any use of tilt when you are able to adjust the hight anyway!!
The H stands are much cleaner than the F ones imo. You only see the single vertical pole when installed as the arm is hidden behind the monitor.
what is a H stand.. can you link pls
Nice, was just about to buy two of these anyway!
Can anyone recommend a more heavy duty one suitable for the LG c2 42"?
I believe the C2 42" has a 300x200 TV VESA mount. You'll need a converter plate to mount it to a 100x100 VESA mount and then find a stand sturdy enough for it
Have this and it works with my 34" Xaomi curve one, it is on the limit, hence the screen facing downward a little bit, but I am fine with that.
Bought these at the start of COVID in 2020. Been solid for nearly 3 years with no adjustment of the base required, and daily use adjusting my screens to switch between siting and standing desk. Highly recommended.
I have just got one - the tilt seems to be struggling with the xioami 34 inch screen - it's within the weight range - but not happy ?
i have a portable montior that only has a single screw hold on the back, anyone know where you can get a vera adaptor to fit this mount?
Got one, does the job!