DEEPCOOL GAMMAXX 400 CPU Air Cooler with 4 Heatpipes 120mm PWM $28.99 +Delivery ($0 w Prime/ $39 Spend) @ Deepcool via Amazon AU

200

Affiliate

Go to Deal

Cashback

mashimus on 19/01/2021 - 11:16 amazon.com.au (409 clicks)

This post contains affiliate links. OzBargain might earn commissions when you click through and make purchases. Please see this page for more information.

Similar to this deal: https://www.ozbargain.com.au/node/597081 But this is for the version 1 I believe.

Sold by Deepcool AU

Be sure to click on the Apply $5.00 coupon to get the discounted price.

Supports Intel Socket 130W LGA20XX/LGA1366/LGA115X/LGA775 and AMD Socket 125W AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1
120x120x25mm PWM fan with blue LED
4 sintered powder heatpipes directly touch the CPU surface
Extra fan clips provided allow adding a second fan
Can be easily installed without moving the motherboard

Price History at CamelCamelCamel.

Related Stores

Amazon AU

Marketplace

DEEPCOOL AU

• 

  Watanabe1995 on 19/01/2021 - 11:20

  Can I use this for ryzen 9 ?

  • 

    satsuper on 19/01/2021 - 13:13

    It will work but I would spend more to get a 140mm fan tower or dual tower cooler if you want to stick with air cooling.

• 

  pork chop on 19/01/2021 - 11:36

  any recommended cheap thermal paste ?

  • 

    zrmx on 19/01/2021 - 11:54

    +1

    If you are quite experienced with the application, can try ShinEtsu 7921 (https://staticice.com.au/cgi-bin/search.cgi?q=shinetsu+7921&…). Pretty much a benchmark for thermal paste in Asia region (due to high cost effectiveness). Main drawback is it's pretty thick, so bit difficult to apply (curing, so using a hair dryer to heat it can help).

    Otherwise the generally accepted staple, MX-4: https://www.amazon.com.au/dp/B08834YGTR

    • 

      pork chop on 19/01/2021 - 12:53

      thanks zrmx.

• 

  anarky on 19/01/2021 - 11:59

  +2

  These are also much harder to install than V2. Make sure you watch a heap of YT videos prior to installation.

  • 

    pork chop on 19/01/2021 - 12:01

    Thanks for the hint. I'll keep an eye out for V2.

  • 

    Elitebhy on 19/01/2021 - 12:22

    +2

    I found it to be way easier for intel anyway, once you get use to the Intel pushpins it is very easy. There is also some commentary that the V1 fan is better than V2.

    V2 installation is a lot more involved as far as Intel is concerned, turns a 2 minute job into a 10 minute job:
    - Backplate
    - screws to hold down the backplate
    - screws on top to mount the cooler
    - screws to mount the mounting brackets

• 

  jkuang180 on 19/01/2021 - 14:19

  Have the LED black version. Can prove that it rattles. Tried tighten all the screws and what not. Still rattles at around 1400-1600rpm. Checked online comments, seems to be common issue.

• 

  toughgamer on 19/01/2021 - 14:36

  I’m using it right now. It doesn’t rattle but blocks a fan header so i had to plug fan in then install this one.

• 

  billymm on 19/01/2021 - 15:28

  thanks op. Ive been using one on a ryzen 3600 for ~3months. Great little HSF. Doesnt hurt to have a spare

• 

  mordinhoz on 19/01/2021 - 20:03

  The AM4 mounting system on this sucks.

• 

  nofate on 19/01/2021 - 23:53

  $39.99 - $5 = $34.99 Is this deal expired?

• 

  pork chop on 01/02/2021 - 20:31

  I received my order today and I learnt it doesn't fit in my mid tower case. Msge me if anyone is interested for $35. I m in Melb.