CamelCamelCamel
Marketplace
MO5UCVOU
This post contains affiliate links. OzBargain might earn commissions when you click through and make purchases. Please see this page for more information.
3-in-1 Soil Moisture Meter Light and PH acidity Tester Plant Tester
Features:
WARRANTY— we take care of all quality-related issues with a REPLACEMENT or REFUND. Pls CONTACT US at the first time if you got the defective item from Kuman Store.
FUNCTIONs — 1,Measures moisture content of soil to lets you know when to water 2, Helps you determine if plant is getting adequate light 3, Helps you control PH level in soil, acidic or alkaline is suitable for your plants,
HOW TO USE — No batteries needed, Indoor or outdoor use. Simply insert the probes into the soil about 4 inches, and you'll get your reading Ideal tool for indoor/outdoor plants, help your plants grow healthy and strong.Please tester into the soil before the soil is moistened with water, 10 cm above the probe to be inserted, the most accurate measured
Package— 2 x 3 in 1 Kuman Soil Moisture Tester
IMPORTANT TIPs —1, Do not touch the stone or hard rock soil, if the soil is too hard and dry, easy to damage the probes. 2. Design for testing soil ONLY. 3. After using, need to clean and wipe the probes.4.measurement of moisture and pH must be viewed while the unit is in the soil,And, the tester must be kept in the soil for 10 minutes or more.
Specifications:
pH Range: 3.5-8 PH (3.5-6.5 ACID, 7 NOR, 7-8 ALKALI)
Moisture Range: 1-10 (1-3 DRY, 4-7 NOR, 8-10 WET)
Relative Light: 0-2000 lux (0-200 LOW, 200-500LOW+, 500-1000 NOR 1000-2000 HGH)
Size: 6 x 28 x 5cm [2.36 x 11 x 2"]
Probe length: 18cm [7.1"]
Copper probe diameter: 4.8mm
Alu probe diameter: 5.1mm
Distance between probes: 1.2cm
Color: Green
Package weight: 107g
Instructions:
Step 1: Switch moisture/pH/light position
Step 2: Stick the probe into the soil about 2-4 inches
Step 3: Adjust the position of the probe until the pointer on the dial swing slightly
Step 4: After 10 minutes, Note moisture/pH/light level in the dial
Step 5: Remove probe from soil and wipe clean after each use
Tips and Advice:
1. Use fine sandpaper lightly sand the probes so that keep clean and dry and then use
2. Don't touch the stone or hard objects since it will be easy to damage the probe
3. Can't test the water for a long time,in case it may damage probe.
4. Don't use it to test rigid ground or floor
5. Don't touch fire and stay away from children
6. Remove probe from soil and wipe clean after each use
Package Included:
2 x 3 in 1 Kuman Soil Moisture Tester
Cheaper on eBay.
Please put the price in the title and also explain how this is a bargain and not just advertising spam