Elegant design
Silver Grille insert
Quiet operation
Excellent Air flow — 200m3/h
Duct outlet
Long life ball bearing motor
Removable grille
Cut out template included
Turbo fan blade
Installation: DIY If existing power point fitted
AU/NZ Power 240V plug
As far as ceiling exhaust fans go, ducted usually means it exhausts sideways out of a 100mm duct opening rather than being an open back (most times is a centrifugal fan)
DIY if you are replacing an existing fan, you would usually always have a power point there as well, rarely hard wired.
Difference in flow rates though, this site says 200m3/h, manufacturer site says 454m3/h. (First thought was they meant CFM, but 200 CFM is about 340m3/h)
Good points, tough crowd.
My comments were related to my laundry where I don't have a fan, so no powerpoint. My other fans in the bathroom and ensuite are hardwired.
Is there a diy video?
If replacing an existing fan they are usualy plugged into one of these…
https://www.clipsal.com/Trade/Products/ProductDetail?CatNo=4…
… that electricians usually install in the ceiling space for such purpose.
That socket is then the part that is connected to any wall switch you might have.
Only if you have a old house.
Umm, is this just the facia cover and not the fan itself? Website suggests its just the duct outlet.. But it has ball bearings?
don't worry this is a complete kit, its an exhaust fan prewired with 240V AU Plug
normally the builder would have included a powerpoint near the exhaust fan cutout hole
and as long as the cutout hole fit, you may simply plug it in and use.
hope this helps.
It seems to be just the duct cover. They have the actual unit listed at $61.88 and it specifies a 50w motor which this does not.
don't worry this is a complete kit, its an exhaust fan prewired with 240V AU Plug
the item spec was copied from heller website, not sure why they haven't included the motor wattage info
but it does mention the air flow of 200m3/h and other bits here too:
Silver Grille insert
Quiet operation
Duct outlet
Long life ball bearing motor
Removable grille
Cut out template included
Turbo fan blade
Installation: DIY If existing power point fitted
AU/NZ Power plug
normally the builder would have included a powerpoint near the exhaust fan cutout hole
and as long as the cutout hole fit, you may simply plug it in and use.
hope this helps.
How does 200m3 compare?
very weak.
As a comparison, our new Rangehood with an external motor is rated at 2000m3/hr.
so …. this is not an exhaust fan ?
just a plastic cover ???
don't worry this is a complete kit, its an exhaust fan prewired with 240V AU Plug
normally the builder would have included a powerpoint near the exhaust fan cutout hole
and as long as the cutout hole fit, you may simply plug it in and use.
hope this helps.
great I can finally use the 5% voucher code!
sorry i am unaware of any 5% voucher code on my website
which one are you referring to?
nice comparison.
hmm looks like the OP left out some vital info.
actual full item title from the webpage.
Heller Silver Square Ceiling Exhaust Fan Outlet Duct Bathroom Laundry 250mm DIY
OP could pls update title or guarentee ther is an actual fan included (dont wanna get a rep as a shonkey poster :P)
don't worry this is a complete kit, its an exhaust fan prewired with 240V AU Plug
normally the builder would have included a powerpoint near the exhaust fan cutout hole
and as long as the cutout hole fit, you may simply plug it in and use.
hope this helps.
Can we pick up?
yes indeed
our lynbrook showroom open from 10am-4pm monday to friday
see you then~
200m3/h
meh
Exactly, most of the Bunnings standard ones are around 400.
How loud is it when the fan is running?
Can the fan only be on/off or does it have adjustable speed?
$5.86 shipping to S.E. suburbs Melbourne
thanks bought one
I've got one of the "Heller 250mm Ball Bearing Round Ceiling Exhaust Fan Long Life HBBF250W" you've got listed on your site, and might replace it with this square one, do they use the same cut out shape?
yes it has the same cutout as the HBBF250W
I'm exhausted after seeing the cost of shipping that kills it.
I bought 2..economies of ozbargain scale
Same. I feel the motor of these is all the same so it should be fine
Haha, nicely done!
Hi op, does this unit come with a draft stopper?
I had one of these, the suction is not half of what it should be
How is this ducted? Is it through a wall or the roof. When I got a duct kit for my rangehood, there were different kits depending on the type of roof.
I wouldn't think it is DIY. Most people don't have a powerpoint in the roof cavity. You'd need an electrician to wire it up and put a switch next to the light switch.