• expired

Mean Mother High Lift Jack 48 Inch 1,500kg $82.20 ($80.27 with eBay Plus) Delivered @ Sparesbox eBay

110
Mean Mother High Lift Jack 48 Inch 1,500kg $82.20 ($80.27 with eBay Plus) Delivered @ Sparesbox eBay
Go to Deal
Cashback
jimojr on 08/09/2024 - 09:21 ebay.com.au (745 clicks)
Last edited 08/09/2024 - 09:34
MS15SEPMS17SEP

One of the most practical recovery accessories you can have is a Mean Mother 48" 4WD jack. It can be used in situations where it is necessary to lift, winch, clamp, pull and push. They are useful in lifting a vehicle clear from obstacles that come into contact with the underbody. By lifting the vehicle holes can be filled or articles such as rocks, wood or sand tracks can be positioned to assist in creating traction for the wheels.

  • Total height 48" (122cm)
  • Minimum lowered height 110mm
  • Maximum lifting height 1020mm.
  • Working Load Limit (WLL) 1500kg
  • Jack complies with mandatory requirements of AS/NZS2693:2007
  • light bulb note This jack requires lubrication prior to use. Failure to lubricate may impact on the function of this jack. 4WD Jacks are often stored in positions where they are exposed to rain and salt. Regular cleaning and lubrication is required to ensure they are in safe working order. Failure to do so may result in a lifting mechanism failure.

Before You Use A High Lift Jack - Watch This.

Original Coupon Deal

Automotive Car Jack

Related Stores

eBay Australia
eBay Australia
Marketplace
Sparesbox
Sparesbox

closed Comments

  • 0 0 0 on 08/09/2024 - 10:06
    +3

    Buy 4 and good for a home DIY hoist to service the car and do engine and transmission replacements

    • beach bum on 08/09/2024 - 10:39

      Ooh that’s a good idea ,
      Also so heavy you’ll want to tell you mates you’ve run out of room in your car and go put it in theirs yourself .
      Thanks mate .

    • umexcuseme on 08/09/2024 - 15:48

      You'll also want to buy a stack of those cheap wrenches from Bunnings so you can put them around the base of the jacks to keep them stable, much like with horses

    • yanman on 08/09/2024 - 21:50

      I actually came to the comments to ask if this is possible or just a really bad idea…

      This would be awesome if it's legit not an unsafe thing to do. (assuming some common sense is used)

      e.g. for an old Beetle weighing less than 800kg?

      • 0 0 0 on 08/09/2024 - 23:57
        +1

        Make sure to use some good quality dynabolts into a concrete slab and extra zip ties

  • hothed on 08/09/2024 - 10:53
    +3

    Pretty sure you need specific lifting points on bullbar/rear bar to use these jacks.

    • Igaf on 08/09/2024 - 14:05
      +1

      Generally speaking, yes. Arguably the most over-rated and under-used off-road product on the market

      • ATangk on 08/09/2024 - 15:34

        If youre an amateur yes, but if you're really far out someone in your group best have something for every situation.

        • Igaf on 08/09/2024 - 19:51
          +1

          Yes and no. In practice it's nigh on impossible to cater for every situation. There are undoubtedly circumstances where a high lift jack might be very useful but In all my off roading and field work I've never seen a circumstance where one was required. In the days of Len Beadell being (or travelling with) a mechanic, engineer, doctor, dentist, cook and off road driving pro was almost a necessity.

          You can carry every spare and tool available and still get stuck/damage your vehicle so that - practically - it needs to be recovered. You make your choices and take your chances accordingly.

  • HitlersDad on 08/09/2024 - 11:58
    +6

    Used one of these to pull out a bunch of fence posts. Worked well.

    • GeneralSkunk on 08/09/2024 - 20:12

      Thanks for the tip. That’s why I’m considering one of these too. What a great use. I was thinking i could tip up my zero turn with it but it’s probably not that safe.

      • HitlersDad on 08/09/2024 - 21:15

        Would be fine for a mower. Anything really heavy would def avoid. I also used mine to lift up a single axle box trailer to change a wheel.

  • stvbarg on 08/09/2024 - 18:13

    anyone used Mean Mother gear ?, is it any good ?….. can't find reviews….

    • LowRange on 08/09/2024 - 20:18

      I got their spare wheel garbage bag and it was a cluster f of a thing. Had different male and female clips which didnt click together. They sent out a new set and same problem. They acknowledged there was a manufacturing problem and sent a third set which was right. But it was a pain to put on. Sold it, got a crashpad and it was 10 times better.

      Not a high lift jack, but the one and only product of theirs I got.

  • beach bum on 09/09/2024 - 09:00

    Also be aware these can be o so dangerous in several different ways .
    There’s a vid on YouTube where a girl is standing in front of a hi-lift jack when the handle suddenly comes up , smashes her in the face and knocks half her teeth out .
    They are a bit of a weapon, best to handle according

Login or Join to leave a comment
Login Join