This was posted 10 months 19 days ago, and might be an out-dated deal.

Related
  • expired

TP-Link Archer AX20 AX1800 Dual-Band Wi-Fi 6 Router $99 Delivered @ Wireless 1

700
TP-Link Archer AX20 AX1800 Dual-Band Wi-Fi 6 Router $99 Delivered @ Wireless 1
Go to Deal
Cashback
Store RepWireless1 on 03/01/2024 - 18:10 wireless1.com.au (1792 clicks)
Last edited 06/01/2024 - 19:07 by 1 other user
MEMBER30

Hi Guys,

We are running deals on this Wi-Fi 6 Router for just $99 delivered.

  • Dual-Band Wi-Fi 6 – Equipped with the latest wireless technology, Wi-Fi 6, for faster speeds, greater capacity, and reduced network congestion.
  • Next-Gen 1.8 Gbps Speeds – Enjoy smooth streaming, downloading, and gaming all without buffering with Wi-Fi speeds of 1.8 Gbps.
  • Connect More Devices – Wi-Fi 6 technology communicates more data to more devices using revolutionary OFDMA technology while simultaneously reducing lag.
  • Extensive Coverage – Beamforming, independent FEM, and four antennas combine to deliver focused reception to devices far away.

Enjoy!

Computing TP-Link Wireless Router

Related Stores

Wireless 1
Wireless 1

closed Comments

  • benniboi88 on 03/01/2024 - 18:31

    How does this compare to the Asus RT-AX1800s that was recently $89 (Now $97.90)?

    https://www.ozbargain.com.au/node/821931

    • SteveD on 03/01/2024 - 19:26
      +23

      @benniboi88:Go for Asus anytime as TP link has lots of security/privacy issues which has not been resolved by the company despite knowing about the vulnerabilities.

      TP-Link Said to be Sharing all Router Traffic with Third Party
      Chinese APT exploits TP-Link router firmware via implant
      China's Mustang Panda Hackers Exploit TP-Link Routers for Persistent Attacks

      Good Luck!!

      • apra143 on 03/01/2024 - 22:31
        +7

        tl;dr Don't use third party firmware and you'll be fine.

        A TP-Link spokesperson sent to the following statement to TechTarget Editorial:

        "TP-Link is aware of a possible security flaw in the 940N reported by Check Point Research (CPR). Upon receiving feedback on a possible security issue, we immediately began investigations. The vulnerability mentioned in the report describes routers that have upgraded Third-party firmware (Not TP-Link official firmware) infected with malicious customizations and embedded scripts to carry out attacks. Still, the report does not say how the routers were infected. We strongly recommend that our users not use any unofficial third-party firmware.

      • twig on 04/01/2024 - 07:40

        The exact method used to deploy the tampered firmware images on the infected routers is currently unknown, as is its usage and involvement in actual attacks. It's suspected that initial access may have been acquired by exploiting known security flaws or brute-forcing devices with default or easily guessable passwords.

        This could be any router manufacturer tbh

      • neonlight on 07/01/2024 - 08:27
        -1

        Taiwan vs China your choice

    • Meron35 on 04/01/2024 - 09:15
      +1

      Asus RT-AX1800s is also supported by custom firmware, whereas TP-Link AX20 AX1800 is Broadcom based and will never be supported.
      https://forum.openwrt.org/t/support-for-tp-link-ax1800/12896…

  • spy on 03/01/2024 - 18:33

    How does this compare to https://www.ozbargain.com.au/comment/14765375/redir?

  • shrugies on 03/01/2024 - 18:40
    +3

    Any other higher models on sale? :)

  • RevMet on 03/01/2024 - 18:43

    this or a mesh network like eero?

    • c00per on 03/01/2024 - 22:31

      apples (this deal) and oranges (eero)… you can use the orange with the apple, but you can't use the orange without the apple.

      • ozbargain2019 on 03/01/2024 - 22:42
        +1

        Does this work with something like the Deco m5? Or should the m5 be used as the router?

        • McFly on 04/01/2024 - 00:13

          It will 'work'. You would (probably) turn off the WiFi in this and set the Deco to AP mode.

          • ozbargain2019 on 04/01/2024 - 00:42

            @McFly: Is there any benefit in doing this vs just using the m5 as the router?

  • Drakesy on 03/01/2024 - 18:44
    +1

    The ZTE Miracle seems to review well, although availability is mixed.
    Else the Xiaomi AX3000t seems to be great bang for buck.

    Still TP-Link is more of a trusted brand.

  • gman90 on 03/01/2024 - 19:10

    Got 3 google wifi nested together currently, would this be a big improvement for streaming from a plex server etc?

    • McFly on 03/01/2024 - 19:34
      +1

      You want to replace 3 Google WiFi's with this?

      • gman90 on 03/01/2024 - 19:50

        Keep having issues with wifi speeds and they are going on 5 years old i think but thinking more seriously about it this is probably not going to be an improvement your right

        • McFly on 03/01/2024 - 20:51
          +2

          Get Deco or something.

        • lancesta on 03/01/2024 - 21:15

          Tbh with you I'm surprised you have any issues with your current setup at all. We've got a crappy Optus one that is over 5 years old and runs streams without any issues.

  • Pete Gabitas on 03/01/2024 - 19:15

    Question please. My telstra supplied (hfc) wifi router (smart modem 2) has recently been struggling to supply stable signal to my office at the front of the house. It used to work fine but now I get frequent drop outs. I think mesh would be over kill, is there any way of knowing if this router would have a slightly longer range?

    • slankets on 03/01/2024 - 19:22

      ax1800 sounds like downgrade from smart modem gen 2?

    • Joker042 on 03/01/2024 - 19:43
      +6

      Honestly, the easiest way to address your situation is to get a decent mesh-capable router, and if it struggles, just add a node. You're looking at a $100 - $150 initial outlay, then a possible extra $100. If you try to solve it with a single un-meshable router, then you could do it first try, or you could do it fifth try - it's likely to be painful.

      With the mesh solution, you could well solve it with one router, then you're only out $100 - $150, but if you need then you can drop the second node in.

      Only thing to be aware of with meshes if you've got one single pain point (like a heavily bricked dog-leg in your house), then be sure there's a conveniently located power point and spot to put the second node (even if that's in the roof).

      I wouldn't go for a mesh pack, just a single router which is capable of ai-mesh or what ever the brand calls their mesh system. E.g: https://www.asus.com/networking-iot-servers/whole-home-mesh-…

      • Pete Gabitas on 03/01/2024 - 20:06
        +1

        Cheers mate. I actually just bit the bullet and ordered the Netgear Orbi mesh from Amazon (before reading your reply).

        • Joker042 on 03/01/2024 - 20:36
          +1

          It's not a bad result, might be a bit overkill, but it'll do the job and that's what matters.

          Just remember that idea of putting one of them in the roof if you're struggling at all. Ceilings are generally pretty wifi transparent and can get around all kinds of ground-level issues. You may want to mount it upside down, as the coverage tends to be kinda mushroom shaped.

        • theguyrules on 03/01/2024 - 22:16
          +1

          Orbi has worked great for me. I upgraded from OG Google Wifi a couple of years ago

      • Robc on 03/01/2024 - 20:13
        +1

        That's what I did. Asus WiFi 6 beasty gaming router first, then a much cheaper (and slower) big standard mesh enabled one to boost the area s i needed. Works well, decent app for management.

        • Joker042 on 03/01/2024 - 20:40
          +1

          Yeah, I have a low-mid level one as my main router, and I'd either buy another one of them, or a fancy one to use as the main and demote my current one, depending on deals / needs.

        • starspawn on 03/01/2024 - 21:10

          Do you just connect to one SSID?

          • Joker042 on 03/01/2024 - 21:36
            +1

            @starspawn: Yeah, the mesh systems handle all that for you, it's one SSID and transparent to the client.

            Asus is the one I happen to know, but a few brands have flexible mesh systems with otherwise decent standalone routers: https://www.asus.com/microsite/aimesh/en/index.html

            • sol3x on 24/01/2024 - 09:48

              @Joker042: @Joker042 Hi, similar to @Pete Gabitas, I am experiencing constant dropouts with my HFC network. May I know which AiMesh router that you recommend is around the $100-$150 mark? I am ready to revamp my entire system for a stable connection.

              My current system is: NBN Arris black box > Republic Netcom modem (freebie) > Telstra Booster 2.

              Thank you in advance!

              • Joker042 on 24/01/2024 - 09:58

                @sol3x: I don't have enough experience with actual meshes to recommend one, I just know the theory. I have an RT-AX55 which isn't running in mesh mode.

                • sol3x on 24/01/2024 - 11:54

                  @Joker042: @Joker042 thanks for the prompt reply mate. I was looking at the ASUS link you provided above, but all the 'AiMesh' capable routers all seem to be over $200+

              • Pete Gabitas on 24/01/2024 - 10:24

                @sol3x: I ended up getting the Netcomm Orbi RBK353 (3 piece) for $299 on Amazon. Very happy with it. No more dropout issues. I probably could have got away with the 2 piece pack but it was only $50 cheaper so went for the 3x.

                • sol3x on 24/01/2024 - 11:55

                  @Pete Gabitas: @Pete Gabitas, much appreciate for the prompt reply mate. I will look into this option.
                  May I know you simply just connect the NBN black box to Orbi?

                  • Pete Gabitas on 24/01/2024 - 13:04
                    +1

                    @sol3x: yes, the app you download tells you exactly what to plug where. I plug my HFC modem (NBN supplied) into the main Orbi device. Extremely simple to set up.

  • ToothPickUser on 03/01/2024 - 19:31
    +9

    I used this router for about a year, honestly wouldn't recommend it at all. Close to the router, I could achieve speeds of 900Mbps. Less than 10 metres away with little to no obstructions, those speeds dropped below 200Mbps, often under 100Mbps and sometimes the connection completely dropping out. I had 2 of these, both did the same. I changed to a better model router and consistently get 800-900Mbps in the same location I was getting 100-200Mbps and not a single drop out. If you care about speed and stable connection, pay a little more and get a more reliable router.

    • fossilgem on 04/01/2024 - 00:46

      Which one would you recommend for stable speed and connection?

      • ToothPickUser on 04/01/2024 - 12:15
        +1

        I got the TP-Link AX5400. You can get it for about $190 on Amazon, cheaper if you get Officeworks to price match as it retails for roughly $300. Definitely worth the extra 80 odd dollars.

  • McFly on 03/01/2024 - 19:33
    +12

    Equipped with the latest wireless technology, Wi-Fi 6

    Um…

  • rlagksquf on 03/01/2024 - 19:39

    Thanks got one

  • Zenskas on 03/01/2024 - 19:47
    +5

    Had one for a little bit to play with, but found it performed more poorly than expected. Both wired or wireless I would get packet loss and drop outs in some games, with the same internet connection and cabling on a different router it was fine. Didn't have anything out of the ordinary setup, no QoS rules or anything extra. Updated to latest firmware, factory reset, tried disabling wifi, tested over multiple days swapping routers in-between to confirm the issue.
    It's certainly possible I just got a faulty unit for that issue in games so I took it back for a refund.

    I also found that despite the size and quantity of the antennas, the overall wifi performance wasn't great at any reasonable range or obstruction e.g anything more than 10 meters and 1 internal wall the speeds would start to drop rapidly. Wifi 6 sounds great but it's not much good if you can't use even half or a quarter of the theoretical speeds. My older and admittedly twice as expensive wifi 5 router got much better range and better speed/stability at all ranges. Just know you aren't going to get close to the speeds you might see on more expensive wifi 6 routers.

    In saying all that if you are looking for a cheap router that does have some half decent features in firmware, are stuck on a slower connection or are chucking this in for someone who's internet usage tops out at emails and browsing websites then it will probably be quite acceptable. For a hundred bucks you can't expect anything too amazing and this could be better than some of the really cheap or older routers included from your provider.
    For the discount and free postage it's still a deal, so long as you keep that in mind and maybe don't chuck it in for a gamer or on a gigabit connection.

  • creesy on 03/01/2024 - 21:00

    Is this a significant upgrade over my r7000 which I feel like Ive had for 10 years? Obviously the wifi is..

    • ReaperX22 on 03/01/2024 - 21:08

      If your router is working fine as a router still, but you want better wifi, consider a dedicated access point imo! I love my ubiquiti ap pro (wifi 5 model) and has worked flawlessly.

      For most the long range or lite versions are probably the best value.

    • StingyBritches on 03/01/2024 - 22:34

      I've just upgraded my 10 year old R7000 to a Synology RT6000ax.

      Wow! It's a beast, but a steep learning curve. Expensive, but recommended

  • Tuggs on 03/01/2024 - 21:19
    +1

    How does this compare to the Netgear nighthawk d7000

  • milobob on 03/01/2024 - 21:20

    Wonder if I should buy this to replace an old AC-68u used as a mesh?

    • McFly on 03/01/2024 - 21:24

      One device mesh - like the sound of one hand clapping.

      • milobob on 03/01/2024 - 23:38

        ok misread the post as it was the RT-AX1800 lol

  • spaceflight on 03/01/2024 - 21:23
    +2

    Dual-Band Wi-Fi 6 – Equipped with the latest wireless technology, Wi-Fi 6

    That's not quite true as WiFi 7 exists and the standard will be finalised in Q1, hardware based on the draft standard is already available

    • McFly on 03/01/2024 - 21:26
      -3

      No kidding

      • spaceflight on 03/01/2024 - 21:27
        +2

        Thanks for a link to a pointless post.

        How are most people who don't follow technology supposed to know what Um… means?

    • Zenskas on 03/01/2024 - 21:34
      +1

      Very true and there's also Wifi 6E which is an extension of 6 but has plenty to offer with an additional frequency, more channels and lower latency over regular wifi 6. This router is not 6E.

      Marketing speak can be pretty vague and misleading as 6 is the standard going on for 3-4 years and is hardly next gen anymore, especially given 6E has been out a few years, and 7 coming to market. Although you could forgive the marketing blurb, it was probably written several years ago.

      • spaceflight on 03/01/2024 - 21:46

        Although you could forgive the marketing blurb, it was probably written several years ago.

        A bit like how printers are still sold with Google Cloud Print.

        Almost like it's really to hard to update making collateral and websites.

        • Zenskas on 03/01/2024 - 21:57
          +1

          What, spend time ensuring up to date and accurate representation of currently sold products on the market? Straight into the too hard basket you go!

  • lilyesp on 03/01/2024 - 22:51

    Sorry by ignorance.. does this include a modem?

    • McFly on 04/01/2024 - 00:10

      No

    • jaydee4 on 04/01/2024 - 00:15

      Archer Ax20 doesn't have a FTTN/DSL(phone line socket) connection

  • ChickenAdobo on 04/01/2024 - 02:33
    -1

    Wifi 7 mesh will be coming soon. Just hold your horses.

    • McFly on 04/01/2024 - 03:07
      +4

      A. Wifi 7 is already here.
      B. In any case it's not relevant to talk about it in a $99 router deal.

    • bcYield on 04/01/2024 - 09:27

      WIFI 7 vs Mesh?

      • TheKLocker on 05/01/2024 - 07:26

        Those are 2 technologies that [can] work together, they're different and not directly comparable.

        • bcYield on 05/01/2024 - 11:49

          Right. The mesh network also uses Wi-Fi technology.

  • jasonxx12345 on 04/01/2024 - 13:00

    I am using a Belong Router (free with plan) for many years and I find the signal is really bad in the room, should I upgrade the plan (12/1 to 25/4) or change a router

    • TheKLocker on 05/01/2024 - 07:17
      +1

      Wifi signal is different to internet speed and you need to determine which is the one you need to improve.

      Go to speed test dot net and run a speed test on your device at a time when performance is bad, if you're getting the full 12/1 then most likely you're wifi is not the problem but your internet speed is so it's probably worth upgrading your plan.

      If you get significantly less than 12/1 then test again next to the router (or even better, on a PC that's directly connected via Ethernet) if the result is back up to 12/1 then your wifi signal is likely the problem and upgrading your router is probably worth it.

      Also keep in mind that both could be a problem and need upgrading.

  • Ryballs on 04/01/2024 - 13:58

    Great customer service from this store. Highly recommend these guys

  • popbelly on 04/01/2024 - 22:40

    This vs Asus RT-AC68U?

  • mckayver on 07/01/2024 - 23:38

    Archer is a great Wi-Fi router. I've had a few over the years and all perfect. 2 died, One struck by lightening and other I dropped.

Login or Join to leave a comment
Login Join