BIGTREETECH 3D Printer Displays, Touch Screens from 20% off, from $15.00 + Delivery ($0 SYD C&C) @ 3D BRO

Related Stores

3D BRO

• 

  CarlosSpicywein3r on 30/04/2023 - 02:03

  I have the TFT35 on my Ender 3 Pro. SOOOOOO much better than the stock screen.

  • 

    TheThoughtFraud on 30/04/2023 - 10:23

    Can you use stock firmware with this screen? (Does the touch automatically work?)

    • 

      CarlosSpicywein3r on 30/04/2023 - 10:25

      +1

      I'm not sure TBH but I don't think so. The touch function uses a 4 or 5 pin aerial connection while the stock board doesn't have this plug so I swapped out my 4.2.7 board for a SKR Mini 3. Bit more of a versatile board.

      • 

        TheThoughtFraud on 30/04/2023 - 11:18

        Thanks for the info. I recently upgraded to 4.2.7 so I will probably pass for now. I dont mind the stock screen but having touch would have been nice!

        • 

          CarlosSpicywein3r on 30/04/2023 - 11:20

          +1

          @TheThoughtFraud: The touch screen has a dual mode function. You hold down the rotary button thing and it will swap between the "fancy" menus or the legacy menu.

          I don't really use either. For some reason the "good & fancy" menus don't show all the details while printing that the retro menu does so I just use an app to connect to OctoPi.

          • 

            TheThoughtFraud on 30/04/2023 - 11:25

            @CarlosSpicywein3r: Yep, im using OctoPi as well, so not relying on the screen to much. Thanks again for sharing your experience.

            • 

              CarlosSpicywein3r on 30/04/2023 - 11:27

              @TheThoughtFraud: No problem. Happy to help.

• 

  Franc-T on 30/04/2023 - 04:43

  Thinking about some for my vorons

• 

  Yekul on 30/04/2023 - 07:36

  Running 3x klipper/mainsail setups on an Rpi and wondering how I run something like the hdmi5. Assume it must connect to the pi, but then will the screen automatically update to each printer when I toggle through the mainsail instances?

  Or should I just purchase a tft50/70 and do it per printer? Obviously one is far more cost effective hah.

  • 

    Associatedxenoxue @ 3D BRO on 30/04/2023 - 20:56

    You only need ONE display for you pi to control multiple klipper instances by running Klipper Screen.

    check out this: https://klipperscreen.readthedocs.io/en/latest/?h=multiple

    which means, pi tft or HDMI5 will all meet your needs.

• 

  goldiep on 30/04/2023 - 09:20

  What works natively with the BTT CB1 and klipperscreen? I tried for ages to get the TFT 7.0 Ver 2.0 to work properly, but had issues which was related to the kernel in the CB1.

  • 

    Associatedxenoxue @ 3D BRO on 30/04/2023 - 16:46

    Try BTT TFT35 SPI, it works natively with BTT CB1 with the latest CB1 image.
    It's on promotion, but just missing from the post.
    https://3dbro.com.au/product/bigtreetech-tft35-spi/

• 

  Nick7 on 30/04/2023 - 12:41

  Any idea how well the BIGTREETECH PI TFT43 v2.0 would mount inside the existing LCD hole in an Ender 5 Plus?

  Looking to replace the external Raspberry pi 7" touch screen I'm currently using with Kipper screen for a bit more of a tidy solution - cant seem to find any useful information online around this.