eSUN ABS/ABS+ 3D Printer Filament $18.99 (Selected Colours) + Delivery ($0 SYD C&C) @ 3D BRO

30

Go to Deal

Associatedxenoxue on 20/04/2023 - 20:07 3dbro.com.au (182 clicks)
Last edited 20/04/2023 - 20:18 by 1 other user

eSUN ABS/ABS+ Selected color discount.

Only $18.99/roll !!!!

Event ends on 27th.

Available Colors:

• eSUN ABS White/Red
• eSUN ABS+ Blue/Yellow

https://3dbro.com.au/weekly-special/

Free Local Pickup available at our Regents Park store.
$11 shipping fee to Sydney metro with Sendle.

Related Stores

3D BRO

• 

  Bellyup on 20/04/2023 - 21:13

  Why use ABS over PETG?

  • 

    RADICALIST on 20/04/2023 - 21:34

    Stronger and high temp melting point.

    • 

      Bellyup on 20/04/2023 - 21:41

      Thanks, so I guess the downside is the smell? Is it really as bad as they say?

      • 

        foonman on 20/04/2023 - 21:47

        Yep

      • 

        DmytroP on 20/04/2023 - 21:51

        IMHO ABS is harder to print and may require an enclosure for larger prints, ABS changes dimensions more with temperature changes.
        I'm not sure it's stronger, PETG is more flexible.

        For me, the higher melting point is the only advantage of ABS over PETG.

        • 

          Tacooo on 21/04/2023 - 01:45

          @DmytroP: ABS is definitely stronger but doesn't have any flex. PETG is slightly weaker but has the flex. Different use cases.

          • 

            DmytroP on 21/04/2023 - 07:20

            @Tacooo: On a few tests I have seen, ABS and PETG were quite close, ABS may be stronger but not significantly. PLA was in some cases surprisingly stronger than ABS and PETG but more rigid.

            https://youtu.be/ycGDR752fT0?t=617

      • 

        Tacooo on 21/04/2023 - 01:43

        Not at all. I print ABS in my office all the time.

        • 

          foonman on 21/04/2023 - 07:33

          @Tacooo: Can I ask what brand - I have only printed with one roll of ESUN ABS+ and found the smell to be scary bad. An enclosure helped but I still wouldn't want to be in the same room. It put me off trying any more ABS.

          • 

            Tacooo on 21/04/2023 - 11:59

            +1

            @foonman: I think my latest was Aurarum but I've done eSun before. Different strokes I guess…

  • 

    Wontons on 21/04/2023 - 00:44

    In some cases, lower-end printers like the Ender 3-V2 will require a hotend change to handle PETG printing temperatures without heating the PTFE tubing to dangerous temps. I personally don't really get a PETG printing smell though.

    • 

      DmytroP on 21/04/2023 - 07:16

      +1

      ABS usually requires a slightly higher temperature than PETG, so it's not really an advantage.

• 

  Tacooo on 21/04/2023 - 01:47

  I'm of two minds with ABS+. On the one hand you can get away without an enclosure but on the other hand you can't vapour smooth it.