Just bought the Wera Stainless Ball-Point Metric Hex-Plus Ergonomic L-Key Set with it for 11% discount. Thanks to bamzero.
CamelCamelCamel.
Its like Twitter Blue
Alexa, Chrome
Wooooosh
Alexa Bezos
Sorry for misunderstanding, I have updated the title.
No doubt Alexa or Google. Note that I think this is 'connected ready' meaning it might not come with a zigbee, zwave, etc module.
So if this can be controlled by Alexa, can't I just stand outside someone's door and scream "Alexa, unlock the door!"?.
Will ask for a pin
I can do that and open my garage door, it's come in handy a few times.
Surely if it's compatible with Alexa that Yale would have made it work with Google too?
Listing says no module. So no wifi or zigbee?
You sure it works with Alexa without spending a bunch more money?
If not I will return it.
Requires a Z-Wave module, but the UK uses a different spectrum to Australia so it won't work. However they are solid keyless locks, I own two. They're designed to work with Lockwood 60mm backset rimlocks (e.g. Lockwood 001).
I'm a bit confused as to how these work. Are you meant to take the front portion of an existing deadlatch off, and this electric mechanism will connect to the remainder of the lock that includes the latch and hence turn it electronically?
@Punkboy: They replace the key operated cylinder and faceplace. You can access the manuals here: https://www.yalehome.com/nz/en/products/keyless-entry/electr…
Connected Ready Smart Door Lock
For this to work with Alexa or Google you need to buy the specific Yale module( Yale Access, Z-Wave Plus or ZigBee) and possibly the Connect Bridge too, all of which are separate products from Yale. What you are buying here is only the keyless lock(without the remote connectivity features) which could be operated with the keypad, key tag or a card but not the App or with an Assistant.
If you don't have a Zigbee or Z-Wave setup you will need to purchase this kit to implement the remote control functions. If you already happen to have Zigbee or Z-Wave and a compatible hub then all you need is the module specific to your smart home network and insert it into the accessory slot of the lock
From my research, you needed one kit per Yale lock. That adds $150 or so to each Yale lock (yes, I want to use an app), and I need to plug them all in. They sell a very nice security screen door lock, but seeing that i need two smart locks for the entrance, plus two for the other entrance, plus four Access kits, it's just… not even sure how to describe the feeling. Who designs this kind of system? Why can't one hub handle four locks?
Not if you already have a zibee or z-wave setup. Then you only need a module for each lock and your existing hub will handle connectivity.
The kit works only with Assure series locks, where there is a tick and gear on the keypad.
Make sure you get the right modules. This looks to have z-wave and Yale modules (V2) available. Very different from the Yale assure (ZigBee, zwave and Yale) modules available for the assure range. They look physically different.
Lockwood Tlock is a much cheaper and better alternative. This keypad is missing the actual locking hardware I think. No deadbolt as it's more of an upgrade to a traditional deadbolt lock.
Is this the same unit you buy in bunnings?
Can anyone confirm if this is the correct module to enable smart capabilities for this lock?
https://www.amazon.com.au/Yale-Connect-Bridge-Access-Module/…
As you'll be using the Keyless Connected with an existing manually operated rim lock, all you can achieve is remote unlocking (same action as turning the key). You still have to turn the knob. Compare with a smart deadbolt, where the bolt action is powered and the lock can tell you if it's locked or not. Also the bridge has to be within 3m of the lock and will suck battery life. I'd suggest giving it a miss for a rim lock setup. You'll still get a keyless lock that can be deadlocked internally, and can't be picked. Cheap generic fobs are readily available. There's no anti-tailgaiting feature so I setup my front door to only allow access with a token. They're such good value because you're using existing lock hardware.
Great information though I planned to use this on an internal door for the garage. Was hoping to add into home assistant and set up automation to Auto Unlock when I am home etc. I also like the ability of being able to see the state of the door, i.e. if it is open/closed.
Do you know if this is the correct module as the info online is very confusing and doesn’t specify this model specifically?
What type of lock does your door have now? If it’s a rim lock (night latch) it can’t be fully automated.
Although it won't do remote without extra hardware, what is really good about this is it'll work with a Lockwood 001 (someone above says) so you can properly deadlock the door - meaning someone can't unlock the door from inside if they get in some other way (say a window). So may smart locks have this flaw. This makes it harder to empty the house of big or awkward goodies.
I've put a Level Bolt on my back door and that works well. Also has a keyhole so you can use that as a last resort if all else fails (just store a key outside somewhere secure). The only thing I don't like about it is the lock I used with it has a knob inside.
I was going to buy a couple of these till I read the reviews and people saying the backup 9V didn't work. If it doesn't have the option of a key backup, you definitely want to be sure the electric backup works and it seems this doesn't - so pass.
Ordered my first one back in Oct 2020, wary of negative reviews. Trouble free after 12 months so I purchased a second one in Nov 2021. It too has been flawless. Likelihood of them both failing on the same day with 9V failing concurrently is acceptably low. BTW, you can use key fobs or adhesive tags with MIFARE Classic 1K Chip 13.56MHZ
Alexa Chrome?