This was posted 2 years 2 months 20 days ago, and might be an out-dated deal.

Related
  • expired

Akko CS 3 Pin Keyboard Switch for MX Mechanical Keyboard (45 Pcs) $13.79 + Delivery ($0 Prime / $39 Spend) @ Akko AUS Amazon AU

350
Akko CS 3 Pin Keyboard Switch for MX Mechanical Keyboard (45 Pcs) $13.79 + Delivery ($0 Prime / $39 Spend) @ Akko AUS Amazon AUAffiliate
Go to Deal
Cashback
Noctuafanboy on 11/10/2022 - 15:53 amazon.com.au (1395 clicks)
Last edited 11/10/2022 - 16:02 by 1 other user
This post contains affiliate links. OzBargain might earn commissions when you click through and make purchases. Please see this page for more information.

Variety of Akko CS ($13.79) and Jelly ($17.93) switches available (linear, tactile, and I think some clickies too). Some are also available pre-lubed. I've linked akko cs Lavender purple tactile switches which are $13.79. Looks as though some CS switches are priced a bit higher - perhaps newer versions? A few keyboards and some other switches also on sale (thank you RichardL!).

All Akko products on sale

Have heard good things about these switches, but haven't personally tried. Sound tests sound quite nice. Very good value IMO.

Thank you to r/budgetkeebs for the deal.

Copy pasted description for akko CS lavenders from PC case gear ($15 there + delivery):

The Akko CS Lavender Purple Switch is a tactile switch that features an actuation force of 36gf ± 5gf, total travel of 4.0 ± 0.5mm, tactile force of 50gf ± 5gf, 18mm extension spring, 3-pin connector, and fits keycaps with the standard MX structure. Comes in a pack of 45 switches.

Features
Akko CS Switch
The Akko Custom Series (CS) switches are custom switches made to obtain a more satisfying typing feel based on user feedback with distinct characteristics. The progressive coil spring used in the Akko CS switches offer distinct and unique typing experiences.

Features of the Akko CS Lavender Purple Switches 45 Pack at a glance:
Tactile Switch
3-Pin
Fits keycaps with standard MX structure

Price History at C CamelCamelCamel.
Computing Akko Computer Peripheral Mechanical Keyboard Accessory

Related Stores

Amazon AU
Amazon AU
Marketplace
Akko AUS
Akko AUS

closed Comments

  • RichardL on 11/10/2022 - 15:55
    +6

    Here's all the Akko Deals on Amazon AU

    • Noctuafanboy on 11/10/2022 - 16:00
      +1

      That's awesome - legend.

  • Fergy1987 on 11/10/2022 - 15:57
    +3

    wish they had some keyboards that werent 60% on sale

    • Noctuafanboy on 11/10/2022 - 16:06
      +2

      Yeah, I personally prefer 75% or TKL over 60/65%. There are a few 65s on sale though here. That being said, the Keychron Q and V series bring really great value with boards supporting QMK.

    • RedditUser2 on 11/10/2022 - 17:08
      +1

      Personally, I prefer 60% off sales.

  • zbc on 11/10/2022 - 16:13

    Does anyone know what is the difference between the 3068B Plus versus non-Plus variants?

  • R3b3l66 on 11/10/2022 - 16:19

    Heya, it's been a while since I purchased a mech K/B and so I don't know what is what any more. Does Akko have a silent one?
    I'm working in a office setting and getting complaints from other others about my noisy (clicky) board.
    Also, do they have a low profile K/B? I have used the Havit for a few years now and love how low they are - https://www.pcmag.com/reviews/havit-hv-kb390l-low-profile-me….

    • blublu on 11/10/2022 - 16:26
      +3

      Have a look through the Keychron range, should be something which suits but if you've been used to low profile, then much more limited (K1) - ie common ones are Logi G915 as well.

      Can't believe you are using a clicky in an office environment… feel sorry for your colleagues!

      Btw these switches are to suit more traditional kb setups so non-low profile.

      • R3b3l66 on 11/10/2022 - 16:32
        +1

        Cool. Thank you for all that feedback. That is really helpful. :-)

        It's an office, but not open plan. We are all in individual offices with doors. Apparently my typing style is loud and the clicky keys accentuate. They can hear it through the walls. Maybe I need to type with less passion!

        • Noctuafanboy on 11/10/2022 - 16:42
          +4

          Probably just not having clickies would help. You can also put foam in your keyboard case to dampens the sound somewhat.

          If you like the tactile bump you could look at tactile switches otherwise linear switches. You can also look into silent switches (linear or tactile) but some people dislike the feel.

          I'd mainly suggest having a watch of some videos on YouTube, find a keyboard you like the sound of, and go from there if you're wanting a new keyboard. If just looking to replace switches, that can be pretty easy if your board is hot swappable or a pain if it's soldered.

          Edit: nvm - just saw you had a low profile board. All of that was related to regular mechanical boards :(

          I believe there are some keychron low profile boards which may solve your problem! Otherwise listening to some sound checks of low profile boards should help.

          • R3b3l66 on 11/10/2022 - 16:52
            +2

            @Noctuafanboy: Thank you. I like what you have offered and will do some deeper research.

        • Erwark on 11/10/2022 - 16:46
          +4

          Tactiles should be way better, but you can further improve things by dampening the case with foam and using lubed switches (any of the Gateron "PRO" switches are pre-lubed). Something like the Keychron V1 has a dampened case, with G Pro Browns it would be pretty quiet. Tactiles are an easier transition from clickies than straight to linear.

          You can get "Silent" switches from Cherry and Gateron that have little rubber stoppers inside that stop the bottom out AND release noise for super quiet typing. Or if you're super on a budget you can chuck o-rings under basically any regular keycap to dampen the downstroke. They're like $5 for a set, but can feel a tad mushy.

          • R3b3l66 on 11/10/2022 - 16:48
            +3

            @Erwark: This is all so seriously helpful. Thank you for taking the time.
            I hadn't even thought of checking out YT and did not know about the tactiles. The sound damping could be a good thing for me.
            As an almost 60 y/o I am happy to learn new things and that is why I appreciate the feedback.
            I hope that each of you have an exceptional week.

    • TheNewDeal on 11/10/2022 - 16:54
      +1

      If it's silent switches you're after, you'll have to look at Aliaz silent tactile switches or the Boba U4s silent tactile switches.

      They're not for low profile boards though.

      • CrispyChrispy on 11/10/2022 - 16:57
        +1

        May be a bit out of their price range, they're not the cheapest by any means. Great switches though (Boba U4s in my experience)

    • yunsul on 11/10/2022 - 18:04
      +1

      if it's low profile you're after, i highly recommend nuphy. they make really great keyboards and the price isnt too steep. They were on sale a couple months back.

    • Pwoar on 11/10/2022 - 23:21
      +2

      Mechanical keyboards are a common hobby for those in IT. As others have mentioned, twctile is a good middle ground. You feel a bump but is quiet enough for an office setting.

      If you do end up doing the foam mod to dampen noise i would recommend getting pre-lubed for find a free weekend to lube switches yourself (took me 8 hours for my 96% kb.)

  • CrispyChrispy on 11/10/2022 - 16:50
    +2

    A fellow r/budgetkeebs enjoyer :)

    Saw the Reddit post as well, though I haven't looked too deeply into Akko switches so I didn't know if it was too good of a deal or not. Now that I look closely at the deal, this is a great price for budget switches that are quite highly regarded. The price for the pre-lubed switches are pretty decent too, though I'm admittedly not sure as to how well of a factory lube job it's gonna be (thinking about 'prelubed' stabs)

  • itchy scratchy on 11/10/2022 - 17:58
    +2

    These Akko switches are crazy value. Currently using lubed CS Purples, and they feel great! I originally got them as a placeholder when I received an unlucky batch of chattering Boba U4T switches but decided to just keep them on and save the money

    • loodealie on 13/10/2022 - 11:02

      Call me crazy but I like CS lavenders over the Boba U4T.

      I found the distinct/sharp bump of my 68g Boba U4T to be more uncomfortable than typing on cherry-blues. The U4T I had only became bearable/good after I swapped the stock spring with a lighter and longer progressive spring (But it then destroyed that unique sharp bump, feels more like typing on a kiwi).

      • CrispyChrispy on 13/10/2022 - 11:04
        +1

        Stock U4Ts for me didn't provide a very good sound or feel for me, as yeah it was quite a sharp bump. They sounded a lot more clacky and high pitched than I initially thought they would as well.

        I've since lubed them with 3204 (tried 205g0 but didn't like the feel as much - a bit too sluggish) and the sound is heaps better and the bump has been dampened too. I didn't lube them 'the Gazzew way', I just lubed them the normal way and they're heaps better IMO.

    • Godric on 20/10/2022 - 08:28

      Swapping from Purple for Lavender, I find Purple requires a bit more force than I'd likeCs

  • HaventAKalou on 11/10/2022 - 18:44
    +1

    I’ve had the Ocean Blues for more than a year and I’ve loved them so far. I would recommend lubing but honestly they feel pretty good out of the box. There’s a bit of ping sound but I think it’s because I didn’t lube the springs

  • beOson on 12/10/2022 - 09:33

    Does anybody have double clicking issues with the akko switches at all?

    • CrispyChrispy on 12/10/2022 - 10:32

      I haven't personally used them, but I haven't heard any complaints of key chattering with these switches. I imagine if you were to overlube or damage the internals somehow (closing it wrong or something) it could cause it but stock out of the factory you shouldn't expect any key chattering.

      • beOson on 12/10/2022 - 10:57

        Reason I asked was because I have owned 3 sets of akkos already while they are good and good value, I encountered double clicking issues on every set. My keyboard is GMMK Pro…

  • Ajeje Brazorf on 12/10/2022 - 09:50
    +1

    Why they only sell 45pcs per pack? That's not enough even for a 60% keyboard :D

    • CrispyChrispy on 12/10/2022 - 10:28
      +3

      It's pretty standard practice, in fact in most cases it's packs of 10 being sold. Sometimes they'll have packs of 80, 90, 100 but it depends on switch price and availability.

      • Ajeje Brazorf on 12/10/2022 - 10:41
        +1

        Right! Thanks for letting me know.

  • Radiskull on 12/10/2022 - 10:29
    +1

    I wish the colour of the housing was neutral so they wouldn't affect light that passed through. I've used the pink variant before and they are decent but have a noticable amount of key wobble even after tweaking. They are a good starter/cheap set. No double registration.

    lmk if you have other questions

Login or Join to leave a comment
Login Join