• expired

Lian Li PC-P80B Black Armorsuit X Edition $399 PCCG

300

Cheapest on Staticice by $70+: http://staticice.com.au/cgi-bin/search.cgi?q=Lian+Li+PC-P80B…

A very pricey case, but I suppose it's a good one at it's price. Aluminium super full tower with support for eATX motherboards. Includes 1 120mm rear fan, 1 140mm LED top fan and 3 140mm LED front fans.

Ed: If you really are too lazy to read through even a few comments and wish to tell the world how bad value this case is because your opinion is obviously going to be the same as everyone else's.. buzz off darnit >: go level up and get +1 gazillion patience+reading skills and +1 gazillion thinking and logic skills/common sense, then come back :)

I'm happy for you to say something like
"It might have been a good deal a couple years ago. But today, you might want to look at the CoolAwesomeCase 6000+1. It has full aluminum body, with support for eATX and it has lots of cooling and front panel USB 3.0 [link]"

Even something like this is fine
"Maybe a nice case if you're making a reasonably high-end rig or are going to be using one of its features a lot, but my GoodForABudget 105 works well for me"

But I would very much appreciate if you do not post something like
"ZOMG! $400 on case ?!?!? you guys are idiots and that is a joke. It doesn't even have 15234 drive bays! And no support for eeeeeeeeATX motherboards?!?! ridiculous!"

If your comment was closer to the latter, see advice above ^_^

Related Stores

PC Case Gear
PC Case Gear

closed Comments

  • whats so good about it? no ps, seems expensive for a case…. doesnt even have inbuilt liquid cooling… seems exxy just for a case…

    • +7

      It's an all aluminium super full tower case that supports eATX motherboards… This wasn't designed for your typical budget gamer build. I have personally done 0 research on the case for reviews etc. I just noticed that it was on sale and that it was much cheaper than elsewhere.

      ed: Lian Li cases are also more expensive because their cases are of higher quality than most other case manufacturers.

      • +25

        If you guys mean power supply when you say ps, then there are really very very few power supplies that come bundled with cases that are any good o_O

        • +5

          Exactly. The cases with PSUs are the low-end ones, generally sub-$100. People who are spending huge amounts on their case want to choose their PSU, not get a bundled generic 550w piece of junk.

      • +6

        I have to agree with Mark here, if you think any high end case would be bundled with a PSU, you must know quite little about computers as enthusiasts like to choose different bits and pieces. Also a PSU purchase should not be based on how pretty case is, your specific needs would have to be addressed. Like for this case it can probably house a few GPUs and bundling it with a 1000W PSU on the assumption everyone is that keen on playing Crysis 2 at the highest res is kinda nonsensical don't you think?

        • +1

          Most high end cases do not come with power supplies. It's only the cheap budget cases that come with cheap power supplies. If I was spending this much money on a computer then I would get a quality branded power supply such as the Corsair HX750.

        • Is there a PSU echo in here?

    • An i7 990X on sale for $600 is STILL a poor value CPU (eg compared to a 2600K), your point? :/
      The highest end computer gear on sale will probably never be good value…

    • +4

      Absolutely its poor value…if you're the type of person happy with a beige plastic case which it sounds like you are.

      This is a case for people who appreciate high quality construction, full aluminium, well designed ventilation, and user friendly design features like a removeable motherboard tray and rounded edges so you don't cut yourself. In other words, people with high end rigs and people who like to tinker alot.

      if you can afford it, easy to use cases are worth buying, along with high end PSUs. I have a high end Silverstone case with a high end Seasonic PSU. Both have lasted through 5 upgrade cycles. Contrast that with the CPU or graphics card you bought 3-4 years ago which is now garbage for gaming.

  • +6

    WOW, I just watched the video on this case. Very impressive!!

  • +6

    this case is godly, and you can replace the m/b tray for one with SR2 design and yes, you can fit an SR2 in here. This case is amazingly good, people who dont know much about computers wont realise the value of this.

    Or people who think that their tank-like heavy cases are 'amazing' and that no matter what it's the best.

    This is NOT the best case out there, but its certainly up there, and the fact that Lian-Li is quality 100% guaranteed and its FULLY aluminium, makes it that much better than 90% of the cases out there, and the fact that its actually spacious and very well designed.

  • left side panel can be secured with a lock, so I'll just open it from the right then?

    I guess the motherboard would be in the way then though…

  • +2

    better spend ur money on other critical components like cpu, mobo, gpu, psu,… unless u have too much money to burn on this.

    • If you're wringing out the most performance you can on a tight budget, yes. But factor in a good case being kept for a lot longer than a cpu, mobo or gpu (maybe even a psu, but they tend to stay around the same amount of time)

  • +3

    This is the absolute best case in the high-but-not-top price range. (400-600) I know a few people with cases from this range who have paid 500-600 and don't regret it for a second.

    I don't get why people who don't see a need or desire/have a need or desire for a high-end case would even comment on this. To me that's the same as people who comment on designer clothes being a rip off even when they're 25% reduced. Sure, to you it may still be a waste of money, but for people who want that product, it's a great deal.

    When I eventually am out of debt and build myself a new highend gaming PC, this would be around my budget for a case.

    • Same here, currently using some case I got years ago. The only good thing about it is it's black.

      • I'm using the thermaltake soprano. One of the ugliest cases ever made. Only temporary because my desktop died (mobo & cpu) so borrowing one of the spares from Mums place until next pay. :)

        • +2

          I agree, the Soprano is one hideous case. Got myself a Armor+… why did I choose thermaltake? Why oh why!?

        • couldn't agree with you more Well on the "why oh why did i get a thermaltake case"…
          but the built in liquid is… functional.

          I got the xasor V (or IV?) nice and roomy, but so far had a few fans die, the PIC/E card holding mechs break, the side pannels tab that holds the panel on break,

          cost more than the Lian Li, but the Lian Li is much better quality… no liquid though…. good for a start…

    • I very much agree with you Ashlea.

      Personally I like the $900 thermaltake case that was designed by BMW. So sexy!!

      • +4

        Oh my god I know!! I'm trying to talk myself out of buying it for my partner for his birthday. :P he'd love it but I can't afford it - try telling impulse buyer me that when I see it on special for $820 though!

        I must say - I think you've reached the limit when all internal components put together cost less than the case. :P

  • +1

    This case has been out for a long time.
    Used to be on the top of my line of cases to get, but now with Corsair 800D, 600D, etc.

    • +1

      My vote went to the Corsair 800D:
      It has hot swappable SATA trays, better cable management options (behind motherboard tray) and cheaper.
      Although the 800D is heavier and doesn't have removable mobo tray.

    • The 800D is definitely the way to go

  • +1

    I do not think this is by any means a wise choice of case. The Lian-Li PC-K58 is a reasonably priced case for $89.

    The differences are as follows:

    1. Steel, instead of aluminum. Some people commenting here seem to think aluminum is better for some unknown reason. It has no effect on heat dissipation, and a downside is that it vibrates more due to a lower density than steel. The only advantage I can see is that aluminum is lightweight.

    2. 5 5.25" drive bays instead of 12, and 4 3.5" drive bays instead of 6. 8 expansion slots instead of 10. But honestly, who needs it?

    3. The distinct advantage that the PC-P80B has over the PC-K58 is that it features 3 intake fans with a fan controller of some sort. If you're willing to fork out $400 for a case, then you're probably willing to do a DIY cooling job. You can purchase good fans with a fan controller for less than $100. More money will get you liquid cooling.

    Now let's look at the differences: The PC-P80B has advantages in being lightweight for its size, has additional expansion space for those who need more than half a dozen hard drives, and a controlled air intake system of unknown performance (and don't forget that rear fans are needed for good airflow).

    To me, that's not worth the extra $310, and nor do I think it is to anyone else.

    • -1

      Anyone else? You're speaking for everybody after many people have spoken for themselves? We're a little bit arrogant this morning now, aren't we!

      • I think I speak for everybody when I say no-one wants to blow $310 unnecessarily.

        • I think you have some good points there: i have
          * 4 2TB stata drives, 2x SSDs' 2* optical drives,
          * 2 Tv tuners, a raid controller, and a graphics card… (PCIe's)

          Id say my machine is pretty decent, that other cheaper Lian-Li case would pretty much suit my needs. (i'd consider my machine pretty high end) would rather spend the extra on a custom cooling solution… if money didn't matter, sure, but then why not splash out on the best case possible.

          the only reason i splashed out so much on the case (was cause i though it would be better than it was) however I learned the hard way.

          my current case(thermaltake Xasor) is heavy as fk, the liquid cooling is crappy.

          think the only mistake you made was talking for everyone :P

          defiantly wouldn't neg it, as some people would require more drives, a lighter case…

          just though it was pretty expensive for a large case.

  • "best case" is subjective. It all depends on the components you're trying to put in. Say for example if you're building a system with just a single graphics card, then this case is not the best for you.. Better off with a smaller case.

  • Squirrel

  • +2

    nice case, but who the hell pays that much for a case anyway. I'd rather spend the money or a) more beefy parts b) a sweet cooling system

  • I am looking for the maximum amount of Hard disks I can put in one case. Currently looking at the Silverstone TJ11 Black ATX but thats 600 bucks.

    I am tempted by this Lian Li one though I doubt it has as much storage capacity.

  • Anyone recommend a cheaper large case for a lot of 3.5" hdd's? My current case is full with my 6 hdd's. Going to have to get rid of some of my smaller hdd's soon if I don't get a new case.

  • +1

    Broden I recommend you get some 5.25 bay conversion kits from pccasegear. I got a Lian Li one that that comes with the case above that takes up two 5.25 bays converting them to three 3.25 hard disk slots.

    Gave me a maximum of 9 hard disks on my case now. But its still not enough :(

  • I would rather spend my money on a better graphics card than a expensive case. But thats just me.

  • to me any case can do the job really it is the other gear that you need to invest on such as V/C, RAM etc but still a good deal here with this price, Soprano used to ship with 430W PSU and that was even below average but still ok.

  • If you're into HUGE premium cases, it's a great deal.

    Too big for me though. I'll limp on with my Antec 300. It does the trick.

  • Good deal but it's also outdated — no front USB 3.0 ports.

  • This is a good deal for THIS case, and it's a decent case too.

  • Brilliant case I must say. But unfortunately I wouldnt spend more than 300 on any sort of case.

  • +1

    What a lot of people don't seem to get is that a CPU that costs $600 dollars can drop down to $300 in six months, although the case can be a keeper (considering when you do an upgrade you don't need to remove the motherboard), why spend so much on a PC that will be outdated in who knows how little. You can get a cheaper CPU and GPU and upgrade every 8 months and still sell the old CPU and graphics card, so why would you every spend more than $2000 on a tower alone? Laziness?

    BTW good deal for a Lian Li case, although I prefer Antec and Thermaltake, Lian Li do make one of the best quality cases (although they do that for a large premium).

  • Great case for those who need the space. I went for the smaller PC-7FNW. I prefer aluminium over steel.

  • bwahaha 400 on a case? wot a joke. and no usb3 even LOL

    • As per lots of above comments which I would prefer that you read before posting, this case was NOT designed for people like you. $400 on a good case will last 5 or more years and still be perfectly capable of use with current gen hardware. $400 on GTX 560 SLI will definitely not. $400 on a 2600K will definitely not. It's also quite difficult to release a technology on a case before the technology itself is released.

      USB 3

      released in 2008-11-12

      P80

      with general stock availability in January 2008

Login or Join to leave a comment