Limit of 6 per customer (edit - I just ordered 14 cans online for pickup with my 15% off gift card. order confirmation recd via email. maybe limit is 6 of each colour?)
Handy for little projects, craft etc.
Paint does tend to go dull if exposed to long term weather.
Any idea if the clear coat with turn yellow with/without sun exposure?
No idea, I only use the colours.
Can this be used on wood? Want to re spray my aquarium stand.
I have used on wood, but best to be primed if it is bare timber.
Bare timber will suck a lot in so you will get less coverage per can.
how many cans will be needed to paint a normal size door (720*2100mm)? Thank you in advance
I'd guess around two cans to cover both sides, assuming the door is already primed or painted.
If it's a bare timber door you'll need to prime it first with a can or two of primer
@edrift: thanks mate, will buy two of each then, will be enough to cover the door and do an undercoat.
I would rather use two more cans than have to play around with it. There is a clear coat already over the timber if that changes anything.
If it has clear over it you might need to sand back a little or prime it for the colour coat to stick.
Depends on how pro of a job you want
Gonnna spray me commodore for extra kw.
Black bonnet - 20kw
Red brake calipers - 5kw per caliper
black roof - 10kw
silver side mirrors - 5kw per mirror
silver door handles - 1.5kw per door handle
black badges - 2.5kw per badge
black badges - 2.5kw per badge
you'll get a whopping 50kw if you put a chevy badge instead
I thought Chevy badges were good for 75w and extra 2 inches.
perfect timing for those school holidaying graffiti artists
I just used some of the gloss black and I'm pretty happy with the results. I would have normally used the 3M gloss black (~$15/can) but had run out and had some of the Export Brand on the shelf.
Clean back to metal, 3M primer, and 4 coats of Export black over 4 days and it's come out looking really good. How long it will last can't say, but not bad for a $2.50 can.
By comparison with 3M I did a Go Kart frame, using all 3M primer, gloss black and clear coat and it's a rock hard finish, not powder coat hard but good enough.