909 Mitre Saw with Stand $110 at Masters Bundall QLD + Other Mitre Saws at Masters eBay Listed

80

View Image

dan76n on 14/11/2015 - 20:16 files.ozbargain.com.au (556 clicks)
Last edited 16/11/2015 - 21:08 by 1 other user

I decided to purchase this on the Masters EBay site last night which I thought was a great bargain for $160 then 3.5% cash rewards cashback.(sold out on eBay store now)
Upper Coomera said no stock on eBay but they had 2 in store.
I did Click and Collect for Bundall and went out to pick it up today only to see they had a 254mm double bevel slide mitre saw with stand for $110. They had about 10 or so on a big end of an isle.
I can't find it on their website but the barcode number is 9333196020455
The mitre saw is basically the same as this 255mm model but the size of this 254mm model.
All 3 without the stand are great prices but the kit with the stand is awesome value.
Remember if you want either of these 2 you can also get 20% off and 3.5% cash rewards cashback.

Related Stores

Masters Home Improvement

• 

  toristo on 14/11/2015 - 20:45

  +4

  If you want to get precise mitre cuts (eg making picture frames), save yourself the pain and buy a decent brand. This is good enough for quick and dirty cuts but it isn't a precision tool and may cause more frustration than its worth if you think that 45 degrees will be 45 degrees.

  • 

    leyton01 on 14/11/2015 - 21:16

    +2

    This. The motor is pretty good but the base is rubbish. Will not give you good accurate cuts.

• 

  Trosticles on 14/11/2015 - 21:41

  Also - this is a single bevel, not a double bevel. That can be annoying…

• 

  zuby on 15/11/2015 - 06:28

  +1

  Check that both the saw blade size and the arbor (hole) size are standard sizes and replacement blades are available in Australia.
  This saw appears to have a blade with 24 teeth, you may want a 40T blade or better for fine work.
  A while back I bought a 909 brand 235mm saw and replacement blades are not available as the arbor (hole) is a non standard size in Australia.

  • 

    turbodude on 16/11/2015 - 13:22

    arbor size is 16mm. I checked a couple of Irwin blades at Bunnings and they come with reducers to suit (hole in saw was 25mm for the ones I checked) so no problem there.