Order One 3D Printed Custom Min-Me from $99 and Get an Extra Copy for Free

20

Go to Deal

AssociatedPtttower on 01/11/2013 - 15:45 3dneoveo.com.au (704 clicks)
Last edited 06/11/2013 - 22:44 by 1 other user

November Promotion - Order one 3D printed custom Mini-Me figurine from us and get an extra copy in the same size for free. If you live in Melbourne and would like to get a special decoration for your family, it is the time to order one from us. Our products are not the traditional big head clay figurine, we use the most advanced 3D technology to capture your 3D image then print it out using Full-Color 3D printer. We are the 1st 3D Photo booth studio in Australia. Our studio is running at home in Waverley Park at the moment, but we are going to open soon in South Melbourne. Hope you will enjoy our service and product. Thank you.

Related Stores

3dneoveo.com.au

• 

  cmaff15 on 01/11/2013 - 16:10

  is this really $99 for a plastic figurine? get dinkum mate.

  • 

    Associatedtttower @ 3dneoveo.com.au on 01/11/2013 - 16:15

    Hi Cmaff15, our material is not plastic, it is made from high performance composite powder , touch like plastered figurine. $99 is for one 4 inches custom figurine and one 4 inches copy.

  • 

    Anyone can on 01/11/2013 - 16:33

    Raj and Howard paid more for theirs, before Bernadette said the same thing.

    • 

      Associatedtttower @ 3dneoveo.com.au on 01/11/2013 - 16:47

      +1

      lol Believe me our figurines will be much much better than those Raj and Howard paid for :)

• 

  DivZero on 01/11/2013 - 16:21

  +1

  If there no surcharge for a fat dude I might have to get me a couple of 6" me dolls! That's not creepy is it? Right?

  • 

    morpheu on 01/11/2013 - 16:39

    +1

    if you asked them nicely maybe they will 'trim' your figure before printing it?

  • 

    Associatedtttower @ 3dneoveo.com.au on 01/11/2013 - 16:49

    +2

    Hi Rick, if you could stand on our rotating platform I promise there is no surcharge :)

• 

  OzzyB2013 on 01/11/2013 - 16:49

  You will need to come to our studio to do full body 3D scanning,live within 5km from Waverley Park, we can go to your place

  You have to go to their business address for them to take the 3D photo they are in Mulgrave, Victoria 3170
  Wish they could do the 3D model from a photograph that would make a great gift idea I'd get one of my parents if it were possible
  the 2 for one price for a 4 inch model is great value for what it is, I just hope they scan photographs foe models one day.

  • 

    Associatedtttower @ 3dneoveo.com.au on 01/11/2013 - 16:56

    +1

    Hi Ozzyb2013, yes we are currently working on developing this service. By that time you will just need to send us 2 photos of your face, then pick up one body model from our system, and will receive your figurine within 7 days no matther where you are in Australia.

• 

  IsTops on 01/11/2013 - 19:32

  What printer model is this?

  • 

    Associatedtttower @ 3dneoveo.com.au on 01/11/2013 - 21:37

    Hi Istop, we use projet 860 pro. This is the only model which can print 3D model in Full Color and High resolution.

• 

  Lionmaru-G on 01/11/2013 - 20:00

  I have not seen a 3D printer at this stage that produce clean finish and paint job. These stuff when you hold up close in hand looks really rough… with lines going horizontally across the face…
  Print job is like dot matrix printers…

  • 

    Associatedtttower @ 3dneoveo.com.au on 01/11/2013 - 21:44

    Hi Lionmaru-G, yes currently most low cost 3D printers produce a bad quality. The price of 3D printers ranges from $500 to over million dollars, which means the quality of the results will differ from each other a lot. Our 3d printer is not the most expensive one, but still cost over $100,000. It is the same one which is used by all 3D photo booth around the world. Some brands are also use this way to promote their products and service such as Adidas and Muji.