anthman » user profile

No email but sign up link worked for me, thank you!

Reminder that was as low as $90 in the past ...

Only if they provide data as well as charge!

The brand has been around for a while, it operates a closed version of klipper though can be installed with vanilla klipper (released by…

$381 for a Flashforge Adventurer 5M would beat all of the models below the K1 and even then give the K1 and above a good run for the money…

These got down to $22.50 in a previous deal 1-2 years ago, just saying...

Hard sell when it was in the realm of $187 under the previous woolies deal.

Depends on your use case. If you are streaming content of your nas to multiple devices, you might benefit from wireless backhaul where you…

So how do I get LTSC?

I can see $20 keys on Google. Is this the normal way to get it?

Thanks got one. Will use for home assistant. Got a nas already so not sure if it's worth proxmox'ing given it'll be single purpose....

So this one is more about speed rather than reliability?

Is it just the extreme version that has all the issues or the non-extreme version (this) as well?

Another thought - have you considered a pizza steel in your oven? Cooks pizzas in about 7min and no reheat time, just switch out the cooked…

Whoops I meant to say - if you are going through the effort of paint correction, you might as well do a proper ceramic application rather…

This is great stuff and you only need very little per application. One spray bottle will last ages. Don't forget to look up the process -…

Just note that an equivalent product is $27 on temu. With the usual coupons, this works out to be -30% and therefore $18.90. only…

Thanks. This is the deal I was referring to ($289 less 35% cashback made out $187 delivered). https://www.ozbargain.com.au/node/865783

Ok thanks, so it is 100A vs 200A discharge and Bluetooth BMS that costs the extra $300

How does compare to the usual voltx 12v prismatic cell lifepo4 battery (recently sub $200 with Woolworths TCB cashback)? I think it's the…

Thanks for sharing, I ordered one.

I currently use a ender 3 v2 heavily modded with klipper via rpi, upgrader extruder and hotend (AliExpress), creality probe, dual z and pei…

Full size and tactile quiet version of the MX mechanical. Wireless, low profile, quiet and nice typing experience - great keyboard and at a…

Save your $30 for a proper reel - daiwa/shimano, Penn, Okuma, fin nor etc... (in that order too!). Even a Shimano Sienna which is about $60…

Thanks, the reason I ask is I reckon you get better value through making your own detailing spray from ONR (which gets lots of great…

How does this stack against ONR rinseless?

Might be the temu approach - make the customer invest so much time and effort to get a discount that they feel they absolutely need to use…

This is not correct. Check out the power draw charts for the various models of minn kotas - in the 12v range, the smallest draw is the 30lb…

Reputable "cheaper" brand, prismatic cells and <$200 delivered. Great deal!

There are a few different Bosch masonry drill bits. What are the best to get for drilling through brick?