athua » user profile

It might be how the bluetooth integration is called when using the command line client vs Pyscript in HA. It looks like the command line…

I tested this theory and for me it is working with my ESP32 BT Proxy as I disconnected my bluetooth adaptor from my HA server and was still…

I am using GIMP to create the GIF. Doing some further testing, the set-gif command seems to be more flexible and the following command…

I was able to upload a 16x16 animated GIF using python3-idotmatrix-client command line but it was originally created by the iDotMatrix app.…

Please just don't quote ChatCPT unless you have actually used what it suggested and it has worked. It would be much more helpful if the…

It looks like the iDotMatrix app is trying to upscale the 16x16 pixel image and is using interpolation so it blurs the image rather than…

I setup a IP reservation on my router based on the MAC address of the printer so it would always allocate it the same IP address and left…

You can schedule it for power saving to turn off the screen overnight (0% brightness). I have the screen on mine set to start power saving…

Did you plug the USB back in? There is no battery in it and it requires USB power to operate. It is not a charging port.

Nice! Now to figure out if it works via ESP32 bluetooth proxies otherwise it will have limited range based on where the HA server is…

Its not hard to do now that we have figured out what needs to be done to reset the PIN if it was set. There is a panel on the right side of…

Glad to hear the reset jumper worked. You now have a working laser printer :)

There is a security reset jumper on the system board which you should be able to access from a panel on the side of the printer. It has a…

You can download the user guide for the 4402P from here:…

The 4700P I purchased had no PIN set. From the user manual I found online, you can try the following steps: Erasing non-volatile memory…

Was your order for pickup or delivery? Mine was for pickup and when it was still pending the next day, I called their Sydney Office to…

It was clean and in good condition. A scuff here or there but very good for a second hand printer.

Picked up a 4700P and the toner cartridge has approx 58% remaining so pretty happy about that. A bargain for $15.

Would probably be ok for a low cost Home Assistant dashboard

The Aldi beans supposedly has the roasted date coded below the Expiry date in yyyymmdd format. So a number like 20240920 would be a roasted…

Looks like this model is a Germ Guardian AC151 model as the pictures match to that of the following manual with an upgrade for wifi as…

The Boost Mobile 260Gb 12 month plan is currently going for $260 and you get the full Telstra Retail coverage.

That is the Welcome Deal. Aliexpress gives you a big discount for your first order so not generally applicable for those who have…

How about the TP-Link SG2008 for $106? Its not PoE but is managed.…

How recent? I bought mine in 2020 and I'm sure mine still runs high as the pressure dial is around the 2 o'clock position when brewing and…

I didn't need to setup any templates to get the above attributes. When adding the switch to LocalTuya, the first item you add is a switch…

The DPS config for LocalTuya is: DPS 18: Current (mA) DPS 19: Power (W) with scaling factor 0.1 DPS 20: Voltage (V) with scaling factor 0.1

It is marketed as Coffee scales as it also has a timer so you can time your espresso shots as well as weighing them.

You could go for a simple kitchen scales but I chose one with a timer as well so that I can weigh my espresso shots and also time them to…

I cannot justify the cost of some of these coffee scales. I got the one below for under $20 several years ago and its still working well:…