mattkenny » user profile

The "16" in CR2016 refers specifically to the thickness. CR2016 is half the thickness as a CR2032, at 1.6mm vs 3.2mm. Similarly, the "20"…

I recently bought a 7060 which is running an i5-8500T w/ 8GB. Seems to transcode 4k fine. The GPU sat at about 50-60% while building up the…

Cheers. Just wanted to make sure I wasn't about to make 2 expensive mistakes (got 2 desks to make, so that's $600 of timber I really don't…

What issues would you expect? I'm planning to rip about 100mm off a 2400x900 merbau glulam panel very soon to make a desk that is roughly…

That's how they charge. You can change plan every day if you like and you just pay the daily charge for whichever plan was the highest cost…

About a month ago they launched their updated pricing. Here's the other speed tiers they list for my service which is not with any discount…

The 7070 has one NVMe slot for a 2280 length SSD. There is also a drive caddy to hold a single 2.5" SATA drive. (I've got a 7070 on my desk…

I've been using the hexplus at work for years now and prefer them to the kinchrome set I had previously (regular hex profile). Just be…

What's the scanner quality like. Got an ancient brother inkjet MFC that I use for scanning far more than printing, but the scanner is…

Difficult for business customers. Many of SVB's customers were business with large balances - many were startups, some having hundreds of…

How do you stop the withdrawals? They simply run out of money well before customers can withdraw it all, so they are now insolvent - they…

Got this to hold the cards that I still need to carry: https://amzn.asia/d/bcF4wOa I still need to carry a handful of cards for work CC,…

Out of curiosity, do they deliver in-store purchases? If so, what sort of cost? Otherwise I’d be having to borrow the work ute after…

Up to you. I bought a corded one for the stupidly large amount of nuts falling off a tree hanging over our yard. In our new place though,…

Whipper snipper struggles with those. The proper edger works well though. Not sure exactly which model whipper snipper I got, but it's 18V,…

I've got a 1m high hedge across the front of our property, and thick Buffalo grass. The Ryobi one 18V range handles them easily. Got the…

Description shows it can do 20V@5A which is 100W. Will likely only do that if it’s the only device plugged in. As soon as you plug more…

Gotta be a school.

I’d love a power board that is about 2m long with sockets every say 10-15cm. Not to be able to have a crapload of things plugged in, but…

While that’s the official line they use, they (and/or their contractors) do occasionally call directly. When I upgraded from FTTN to FTTP…

I’ve got a NanoHD and a U6-Lite. The lite is a bucket of poo compared to the nanoHD. Most devices seem to prefer to connect to the…

They also need to take the accuracy of the equipment and the equipment setup into account. They will always need to take off a few k’s…

Nice. I was just about to order the older 100W model, but this one is much better deal. But I wish this would be combined with a USB-C…

I'd write to Woolworths and request they reimburse you for the food deliveries you've had to pay for due to them delivering to the wrong…

For a student? While they might be a good chair, I think a cheaper but still decent chair and a bunch of other items would give a far…

I turned my large mouse pad to portrait orientation, and have the front section hanging over the edge of the desk to prevent it going too…

I think 1440p is a pretty good resolution for 27". I think 4k would be better from around 32" though. I use some software that doesn't…

Often the 85" models have significantly different sources from the smaller panels that are labelled as the same series. Rtings only reviews…

https://www.ato.gov.au/Individuals/Income-and-deductions/Deductions-you-can-claim/Other-work-related-deductions/Protective-items,-equipment-…

It can mean you can push it hard to against a wall, but when needing to add in more gear or reconfigure any wiring etc you can easily…