This was posted 3 months 24 days ago, and might be an out-dated deal.

Related
  • out of stock

Wera 6004 Joker 5 Self-Setting Spanner Set, 5 Pieces $222.61 Delivered @ Amazon DE via AU

230
Wera 6004 Joker 5 Self-Setting Spanner Set, 5 Pieces $222.61 Delivered @ Amazon DE via AUAffiliate
Go to Deal
Cashback
bradenpd on 29/07/2024 - 10:57 amazon.com.au (1842 clicks)
Last edited 29/07/2024 - 11:18 by 1 other user
This post contains affiliate links. OzBargain might earn commissions when you click through and make purchases. Please see this page for more information.

Cheapest of all time according to Camelx3. Comes with the XS, S, M, L, XL Wera Joker 6004 self setting spanners and a foam case.

6004 Joker XS self-setting spanner
1x 7-10 x 1/4-3/8" x 117 mm

6004 Joker S self-setting spanner
1x 10-13 x 7/16-1/2" x 154 mm

6004 Joker M self-setting spanner
1x 13-16 x 1/2-5/8" x 188 mm

6004 Joker L self-setting spanner
1x 16-19 x 224 mm

6004 Joker XL self-setting spanner
1x 19-24 x 3-4”-15/16” x 256mm

Price History at C CamelCamelCamel.
Home & Garden Spanner Wera

Related Stores

Amazon AU
Amazon AU
Marketplace
Amazon Germany Store
Amazon Germany Store

closed Comments

  • Skullytor on 29/07/2024 - 11:02
    +1

    wow still $222 for what looks to be a spanner set. Do they work as good as advertised?

    • bradenpd on 29/07/2024 - 11:06
      +4

      I just bought one so… I hope so!

    • illogicalerror on 29/07/2024 - 11:07

      That's at %50 off… wildly expensive. High expectations I would hope in terms of quality.

      • bradenpd on 29/07/2024 - 11:22
        +1

        Even better, 56% off!

    • boomramada on 29/07/2024 - 12:20
      +2

      Do they work as good as advertised?

      Good to look at in your toolbox ;)

    • BBear53 on 29/07/2024 - 13:28
      +1

      I considered buying a few of these to replace my cheapo Supercheap shifter but the action to engage the jaw put me off.

      It would need a lot of space to swing the handle for it to clamp down so this would be hard to use in any tight spots like under sinks.

      I ended up buying a Bahco 3pc set of standard shifters during the prime day sales instead.

    • superpotato on 29/07/2024 - 15:38
      +1

      I bought this set off of a mate for $100. I haven't found them to be any more useful than a ratchet spanner or even just an open end.

      They're okay if you have sufficient clearance.

      My main gripes:

      • Loosening a nut. Once there isn't enough friction between the nut and the bolt, the "ratchet" function stops working, I guess same as a normal ratchet spanner however it's much easier to stop a ratchet spanner from turning than this spanner.

      • Clearance. The heads are quite large.

      • Setting of the hex head onto the jaws of the spanner. You can set the hex on the flat of the jaw or the small v groove but I find this makes operation a little janky especially when you can't see the nut being undone.

      I could just be using them incorrectly but I've had a good go at them. If anybody's had a better experience I'd love to hear it.

  • SgtFury on 29/07/2024 - 11:07
    +3

    Worth buying just on the preview of his new movie.

  • richardnau on 29/07/2024 - 11:24
    +2

    I have purchased several of the other products from this brand - quality is superb.

    • Murkymerv on 29/07/2024 - 12:23
      +1

      So it should be

  • Jiyujin on 29/07/2024 - 11:51
    +1

    Bought! Cheers OP.

  • gretathunberg on 29/07/2024 - 11:56

    German economy collapsing.

    • reactor-au on 29/07/2024 - 12:00

      Isn't the global economy collapsing?

      • Murkymerv on 29/07/2024 - 12:25
        +2

        if linked to the American or petro dollar

        • reactor-au on 29/07/2024 - 12:35
          +1

          Even China doesn't look so hot right now

    • wt860 on 29/07/2024 - 12:11
      +3

      Sorry for the disappointment - Made in Czech

      • educalifa on 29/07/2024 - 14:56
        +1

        Yes but by Germans who had to immigrate due to the collapsing economy :p

    • Murkymerv on 29/07/2024 - 12:23
      -4

      Thank America for that , Bidenomics

    • boomramada on 29/07/2024 - 16:09

      Don't think it even made in Germany lol

  • ATangk on 29/07/2024 - 11:59
    +1

    Says 25% claimed but only 5 left. Not really sure how the maths checks out.

    • bikebot on 29/07/2024 - 13:00
      +3

      They work in imperial, nobody understands that mess

    • Mostly Fanless on 29/07/2024 - 13:03

      I think the 5 would have been stock on hand, after that it's back-order (as it is now with 82% claimed).

    • illogicalerror on 29/07/2024 - 13:47

      That's my sort of maths… see username

  • reactor-au on 29/07/2024 - 12:00

    At this price, I'd rather go with some ratchet spanners as that would likely save more time and effort than a joker spanner.

    • bradenpd on 29/07/2024 - 12:14

      Any recommendation?

    • ATangk on 29/07/2024 - 12:34
      +1

      The usecase for these seem more like a "im not sure if this bolt is imperial or metric, and it looks about 8mm but not sure if its 9mm, ill just grab this thing and itll work". I.e. replacement for a shifting spanner more than the fixed size spanners.

      • reactor-au on 29/07/2024 - 12:36

        How often does that happen? Would be a lot cheaper just to use an adjustable wrench unless you are literally going nuts all day.

        • ATangk on 29/07/2024 - 12:38

          Which is why you shouldn't buy these unless you're addicted to Wera/Ozb deals, or have a true purpose in using these.

    • PlaunsJanus on 29/07/2024 - 13:36
      +2

      At this price they're a no brainer.
      I need 2x spanners to tighten a nut and bolt for obvious reasons.
      Gearwrench have failed on me several times and the lifetime warranty replacement has been too long winded to every buy them again.
      13mm, 16mm and 18mm switch failed after little use. The simple straight flipable ones are alright.
      Saving more time and effort, weight and space is the reason you buy these.
      Your toolbag gets very light very quickly with these.
      *Right tool for the job though
      I have all the knipex pliers wrench from 100mm - 400mm some doubles
      2x ratchet spanner sets 5mm-36mm
      2x Bahco 5pc ratchet ring spanners
      Bahco ring and open spanners to 21mm
      Deep impact sockets upt to 36mm
      Gedore open end and ring combinations 13+17, 19+24, 16+17, 18+19, 24+27 and more
      Ratchet podgers etc
      The list goes on. But my point is that I've needed every one for a different purpose on the ground or in an EWP where tools and whatever you're installing will make the EWP overweight

  • P1xellat3d on 29/07/2024 - 12:03
    +6

    A breakdown of costs if you were to buy individually (based on recent sales):

    • XS - $26.38
    • S - $35.82
    • M - 39.06
    • L - $50.47
    • XL - Don't believe it has been on sale, at least not listed on OzB, so will assume current listed price of $74.20

    Bringing the total to $225.93. Not to mention those individual prices are all expired (and doesn't come with foam insert), so this is quite a decent deal.

    • siuol on 29/07/2024 - 12:13
      +1

      quite annoyed by the fact that I missed all those previous deals.

      XL and L wouldn't be so useful in DIY situations.

    • ATangk on 29/07/2024 - 12:14

      Its probably more appropriate to compare the other 4 with this:

      https://www.ozbargain.com.au/node/836681

      It comes with a carry case and was $164.98, but doesnt come with the XL, which makes the XL $57.63 but with a different type of case included.

  • MauTauAja on 29/07/2024 - 12:49
    +1

    Bought one, Thank you OP!

  • pegasusx on 29/07/2024 - 18:31
    +1

    The use case of these are limited compared normal open ended wrenches. I have these and the Normal 9001 jokers.

    I've used these under a dozen times over the last 2 years. But each time it was a life / time saver Mostly in confined spaces. Or situations where a nut was covered by something else. E.g. Shelf on a data rack was bolted into to the frame. And that nut was covered by another rack. Standard wrench was blocked by the limited movement. These snuck Into the gap and had just enough rotation to undo the damn nut.
    Saved us from disassembling the adjacent rack (bolted down)

    • PlaunsJanus on 30/07/2024 - 19:57
      +1

      Appreciate the comment.
      Its easy to underestimate the importance of niche tools when looking at the price, but they can eliminate or reduce downtime for data and power in certain situations.

Login or Join to leave a comment
Login Join