• expired

INKBIRD Wi-Fi Aquarium Temperature Controller ITC-306A $45.49 + Delivery @ Inkbird

20

Contents:
35%off INKBIRD AQUARIUM Temp.controller ITC-306A
INKBIRD ITC-306A-WIFI is specially designed for AQUARIUM with key features such as WiFi control, dual protection, heating alarm, out-of-box and dual probes.
WiFi control: we can connect INKBIRD ITC-306A-WIFI with mobile phones via WiFi and its free APP, so any abnormal temperature will be alarmed on our mobile phones and we can monitor our aquarium temperature much easier and more efficiently. Note: INKBIRD ITC-306A ONLY supports 2.4GHz WiFi router.
Better protection for aquarium creatures: equipped with 2 relays, one for output control and the other one for abnormal protection, INKBIRD ITC-306A-WIFI ensures the power can be turned off under any abnormal circumstances and offer more and better protection for our aquarium creatures for water overheating.
Temperature alarms: INKBIRD ITC-306A-WIFI supports alarms for continuous heating, high-and-low temperatures and abnormal probe performance, safer for aquarium creatures, better device lifetime.
Continuous Heating Alarm: The heating time can be set according to your needs from 0 - 96 hours, the controller will alarm if water can not be heated to the target temperature within the specified time. The temperature setting range is 0.0℃~45.0℃/32.0℉~113℉.
Dual probes design for more safety: its alarm will be triggered once the temperature difference of its two probes is over 5℉(3℃) and its APP on our mobile phone will pop up the alarm notification at the same time for more safety of our aquarium creatures.
Temperature calibration: INKBIRD ITC-306A-WIFI supports temperature calibration for more precise temperature setting, monitoring and controlling, offering more security for aquarium creatures;

More deals please check TODAY DEALS :
https://au.inkbird.com/collections/today-deals

Related Stores

Inkbird
Inkbird

closed Comments

  • These are great.
    Have had one running on my 5ft African cichlid tank for years

  • +1

    Rep figured this out so it doesn't beep every 6 hours and annoy everyone?
    Has it had a firmware update recently?

    • I've got half a dozen of these running, and none of them exhibit the behaviour you're complaining about. You've probably installed or programmed it wrong.

    • -2

      so it doesn't beep every 6 hours and annoy everyone?

      Fish can't hear it…

  • -1

    Is there an API yet?

  • I have one of these and its good
    been using it for years.

  • +2

    These are also great for sous vide. Just remember to restore the temp setting before putting it back in the fish tank.

Login or Join to leave a comment