CamelCamelCamel
Marketplace
This post contains affiliate links. OzBargain might earn commissions when you click through and make purchases. Please see this page for more information.
I bought this printer for 300, and had good results.
For this price it is a bargain!
【Classic I3 Structure Combines with Sovol New Design】Different from most 3D printers run by wheels in the market, SV06 has a classic I3 structure which avoids wear and tear of wheels and multiple replacements and it is widely applied into industry. We did something new to make it more applicable for household use. Modular design allows you to assemble SV06 within 5 steps easily.
【Planetary Dual Gear Direct Drive】Sovol self-developed All Metal Direct Drive Extruder with planetary dual gear set, provide SV06 with higher drive ratio and a lighter motor, helps to achieve more accurate extrusion. Add large external knob for easy feeding.
【300℃ High Temp Printing】All metal Hotend Setup makes it possible to print up to 300℃. No need to deal with PTFE replacement anymore, and even no need to flash the firmware, you can print with different materials better and more easily. ( Enclosure is still needed if you want to print over 260℃.)
【25-point Auto Leveling】With inductive sensor, detect the metal print bed through 25 points automatically and compensate the unevenness of the heated bed. The fast, smart, precise detection and compensation help you to get the bed leveled perfectly and get an fantastic first layer.
【PEI Build Plate】The flexible PEI-coated build plate with mesh surface design makes the prints can be removed easily without any tools. 220220250mm print size, enough for daily use and household use.
【Self-developed 32-Bit Silent Board】With TMC2209 drivers, makes the printer works stably and quietly. UART mode is available, so that more modifications can be done easily for advanced users.
【Comprehensive Warranty】Sovol 3d printers come with one-year warranty and lifetime technical support. If you have any question on Sovol SV06 3d printer, please click "Ask a question" through our storefront's page. We will fast respond within 24 hours and provide you with a satisfactory solution.
I've got the SV06 Plus instead of this. That thing will chew through any filament. Some machines are fussy about wet and brittle filament… this thing chews it right through. Soft TPU? No problems either!
Im sure the standard SV06 can do just as well.