This was posted 10 months 8 days ago, and might be an out-dated deal.

Related
  • expired

Scheppach 2000W Sliding Mitre Saw With Laser $149, Mitre Saw Stand $79.99 @ ALDI

600
Scheppach 2000W Sliding Mitre Saw With Laser $149, Mitre Saw Stand $79.99 @ ALDI
Go to Deal
WatchNerd on 14/02/2024 - 13:02 aldi.com.au (3627 clicks)
Last edited 14/02/2024 - 19:24

Aldi Tool & Hardware Sale Starts 17th Feb.

Scheppach HM216 Sliding Mitre Saw… $149.00

  • 2000W motor
  • 216mm saw blade
  • Cross-cutting width up to 340mm
  • Aluminium extension and standard laser provides high visibility for precision cutting
  • 5 Year Warranty
  • Last year's comments. Credit to myfeetarehappy

It looks the same as this one on Amazon AU. Also it's called Scheppach HM216 on Amazon DE.

Youtube - Russian Review Scheppach HM216. This one looks like a bigger model.

Mitre Saw Stand… $79.99

  • Easy and secure device mounting for safe and ergonomic work
  • Maximum load capacity of 150kg
  • Stand height: 77.5cm
  • 5 Year Warranty

Workzone VDE Screwdriver Set 8pc $11.99 @ ALDI

Special Buys Satisfaction Guarantee - We will refund or replace any non-grocery specials within 60 days. Please provide your original receipt (or other proof of purchase), ideally with packaging, when you return the item to us.

Home & Garden Mitre Saw Mitre Saw Stand Power Tool Scheppach HM216

Related Stores

ALDI
ALDI

closed Comments

  • Phage on 14/02/2024 - 13:08
    +4

    am i missing something but its the same? just 200 less Watt? https://www.bunnings.com.au/ozito-1800w-210mm-8-1-4-double-b…

    • WatchNerd on 14/02/2024 - 13:10
      +2

      Very similar I guess however that only has a 3 year warranty & smaller cutting width as mentioned below by leeroys_dad.

      • yellowfever on 15/02/2024 - 09:20

        I would buy the Bunnings Ozito one over buying a power tool at Aldi. Warranty/replacement/exchange/refund at Bunnings is far easier than Aldi.

        • Pud3000 on 15/02/2024 - 14:19
          +2

          I had a thermomix knock off from aldi that died after about a year. Took it in without a receipt and got a refund (showing the amount from bank transaction).
          One of their 20v batteries died, took it in and got a replacement delivered to store in 4 days.
          I think their refund/replacement is top tier.

          • Fudgie the whale on 16/02/2024 - 11:16

            @Pud3000: You can get the money back no worries, the issue with tools is, it's implied you'll still want the tool if it breaks, and they won't be able to replace it, only refund it.

        • Salmando on 03/03/2024 - 14:28

          The ozito brand has been absolutely terrible for me. I'd take a gamble on any other brand over ozito.

    • RichardL on 14/02/2024 - 13:11
      +3

      Bunnings most likely price-matched with their equivalent brand.

      EDIT: Normally $199 as per Price Hipster

  • leeroys_dad on 14/02/2024 - 13:11
    +6

    Wider cuts for aldi

    • Luckypenguin on 14/02/2024 - 16:16
      +1

      An underrated feature.

    • c64 on 15/02/2024 - 12:25

      an extra inch makes a huge difference in getting the job done right

  • Jimothy Wongingtons on 14/02/2024 - 13:18
    +7

    5 year warranty for $149 - hard to say no

    • dufflover on 14/02/2024 - 14:04
      +6

      In my experience though there's a risk they won't do a warranty replacement/repair and instead force you take it back for a refund. And sometimes needing a working saw is more important than the refund.

      • Jimothy Wongingtons on 14/02/2024 - 14:06

        maybe the ozito might be the go then in the other deal with the bunnings offering

        • dufflover on 14/02/2024 - 14:12
          +4

          I love Aldi stuff and the competition they bring for things like the Bunnings equiv ptice matches but for some things, like key power tools, I'd rather get Bunnings. Been burnt on two occassions. Aldi are fine, the Action Spares support not so much…

          Or, it has to be at a heavy clearance price that some Aldi's are good for.

          Ironically in the context of this deal, I say this as someone who uses the Workzone cordless version of this saw lol

      • Alley Cat on 14/02/2024 - 14:54
        +4

        Same experience. But I’ve since worked out: return for a refund when it breaks, then get Ozito from Bunnings. The price of the Ozito isn’t gonna be matching the refund, but it’s like you paid rent for a tool that was exclusive for your own use. Of course this only works if you have a Bunnings close by.

      • c64 on 15/02/2024 - 12:26
        +1

        instead force you take it back for a refund.

        i always saw that as an advantage. better than being stuck with a POS saw

  • theguyrules on 14/02/2024 - 13:19
    +8

    God I need more space for tools in my garage. Curse you modern housing.

    • Jimothy Wongingtons on 14/02/2024 - 13:38
      +8

      good thing is within 3 days you will have yet another tool to help you create more storage solutions!

      • theguyrules on 14/02/2024 - 13:41
        +5

        That's some 4D chess level thinking. Love it.

      • jellykingdom on 14/02/2024 - 15:40
        -2

        In 4 days from now, the tool will be dead so you wont need the space after all

        • Jimothy Wongingtons on 14/02/2024 - 15:41
          +2

          thankfully returns process is straightforward! *

          *in theory

  • MrSaladSpinner on 14/02/2024 - 13:27

    Would this be ok to cut aluminium with?
    I have a deck on order and will need to trim some of the aluminium subframe before putting it screwing it together.

    • Calvinlsyd on 14/02/2024 - 13:33
      +4

      you just need the right blade installed. the one comes with it could be basic and wood only

    • Jimothy Wongingtons on 14/02/2024 - 13:39
      +1

      i dont see why not with the right blade, i used to cut ally extrusions of 17x15mm (hollow) with a crappier no name mitre saw.

    • c64 on 14/02/2024 - 13:43

      depends on how thick. i've used to a regular table saw to cut an aluminium sheet

    • billadm on 14/02/2024 - 15:50

      Would this be ok to cut aluminium with?

      I never tried but I assume the mitre saw head would have more vibrations.
      You could try (it's risky) by adding extra clamps and replace the cutting disc with one specific for aluminium that has as many as possible teeth for a smooth operation.

    • DarwinBoy on 14/02/2024 - 16:02

      Metal builds up more within the guards then wood. All those sparks build up and form a rock hard slag that builds up quickly.
      So Id be pedantic with cleaning if cutting metal with this.

    • apsilon on 14/02/2024 - 16:35
      +1

      It's generally fine to cut aluminium with wood working tools. It'll obviously blunt the blade quicker but the bigger issue, all these low end saws come with low tooth count blades and are designed for rip cuts, something a mitre saw is never used for or can be used for, but I'd be surprised if it doesn't come with a rip cut blade anyway (unfortunately the ad provides no information). Point is, you may need to invest in a higher tooth count cross cut blade. Blade will cost around the $60 mark give or take depending on brand/quality.

    • marko62 on 15/02/2024 - 05:58

      As others have said with an aluminium blade. I used a 10" Ozito saw to cut 70 x 22 fly door to make about 20 shade cloth panels for the shaded area along the side of the house.

    • c64 on 15/02/2024 - 20:48

      Would this be ok to cut aluminium with?

      this guy in this video https://www.youtube.com/watch?v=uEwC0QtZIMs had no problems cutting through his top guard rail after he forgot to take it off before a bevel cut

  • c64 on 14/02/2024 - 13:47

    does it do bevel cuts? it is not clear

    pity they don't sell a bigger 10" one (i think they used to at one stage)

    • mauricem on 14/02/2024 - 14:30

      Be very surprised if it didn't. It's a standard feature in all mitre saws I've ever seen.

      • c64 on 15/02/2024 - 08:59

        i can see the guard rail is sloped on either side near the centre so i'm guessing it does double bevel, but they should state stuff like that in the description

        • mauricem on 15/02/2024 - 09:52

          They should but a cursory search of the model number shows

          "Specification:
          45° cutting capacity: 240x65 mm
          90° cutting capacity: 340x65 mm"

          Not sure about double bevel but I'd try and track down the user manual to be sure of the specs. Either that or just buy it and return if not suited.

  • Ozjoey on 14/02/2024 - 14:14
    +3

    Can I use it on delicatessen?

    • gdogdiggity on 14/02/2024 - 14:31

      No

    • Polt on 14/02/2024 - 15:15
      +3

      Anything is possible with the right attitude

  • Bundao on 14/02/2024 - 14:32
    +1

    The stand link ($80)
    https://www.aldi.com.au/special-buys/special-buys-sat-17-feb…

    • ShouldIBuyIt on 16/02/2024 - 11:45

      Wait a couple of weeks and they'll be $29 a pop. Bought 2 last year

  • TheOtherLeft on 14/02/2024 - 14:40

    What is the difference between this and metal drop saw? Is it only the blade type or power of the motor?

    I want to be able to cut metal tubes, small diameter pipes etc, nothing crazy.

    • billadm on 14/02/2024 - 15:53

      You need the right clamps that hold still the material and minimise the vibrations.
      The sliding mitre saw's head also has more vibrations compared to a traditional cutting saw.

    • Duff5000 on 14/02/2024 - 16:01

      One of these is made for that sort of work:

      https://www.bunnings.com.au/ozito-2300w-356mm-corded-metal-c…

      If its just the occasional thing personally i just use a reciprocating saw with a metal cutting blade. Depends on how accurate you need to be.

      • DarwinBoy on 14/02/2024 - 16:04

        I picked one of these up for $20 off market place and it has been amazing value for me.
        Only used it a few times but it does the job.
        Even scored another 2 blades for $5 each the other day so good for a few more projects.

  • danyool on 14/02/2024 - 14:43
    +1

    Fricking laser beams?

  • Alzori on 14/02/2024 - 17:53
    +1

    I got one of these last time. It's still a budget offering yeah, doesn't seem super precise with angles and stuff, light construction but it's solid enough. Useful for basic tasks. Seems better than the Bunnings offering when I looked at that one in store.

  • myfeetarehappy on 14/02/2024 - 17:59
    +1

    Last year's comments… https://www.ozbargain.com.au/node/756104

  • RenewableInitium on 14/02/2024 - 19:00

    So Ozito or Aldi?

  • ruprectaus on 14/02/2024 - 21:29

    This or $1500 for the Bosch 305mm gliding mitre saw… decision made, as there is no Aldi here in Tassie ! DOH !

    • zombie hunter on 14/02/2024 - 22:03
      +1

      This deal for Australia only…..Go to the taswegien ozbargain site ….

  • OZmelb on 15/02/2024 - 08:39
    +1

    I would wait for Bunnings deal and spend $50 extra if required to buy Bunnings product instead of Aldi.

    • mickeyjuiceman on 15/02/2024 - 08:54

      I wouldn't given what they're offering at Bunnings

  • c64 on 15/02/2024 - 12:29
    +1

    i hope it fits on those cheapo craftright saw stands i bought back in november

  • ttacx on 15/02/2024 - 20:45

    Lets go!

  • megadeth on 17/02/2024 - 16:09

    Got one. Thanks OP.

    • WatchNerd on 17/02/2024 - 16:25

      Great what do you think, any good?

      • megadeth on 17/02/2024 - 17:16

        Haven't tried it yet. Better than my non-sliding basic Ozito (which will now retire).

      • c64 on 17/02/2024 - 17:18

        first thing i want to do, while i still return it, is to try to loosen the blade nut. apparently they are on pretty tight out of the factory

      • megadeth on 17/02/2024 - 17:22

        Was last piece left in our local Aldi

  • Dodg07 on 18/02/2024 - 12:45

    Does anyone know how wide the saw stand is on full extension ? Of course they dont put that in the detail.

  • mickeyjuiceman on 19/02/2024 - 09:35

    Anyone in Ballarat looking for these, the one in town has both, and Sebas has the saw.

  • jaybees on 19/02/2024 - 09:52
    +1

    Thanks OP, bought one. Tested it this morning. Stock saw blade is crap. I put on a higher quality Dewalt 60t carbide blade (took it off my circular saw). Cuts much better now. Motor is powerful doesn't bog down with hardwoods and it cuts pine boards like butter. Accuracy is ok, but not as accurate as a high quality saw. I bought it assuming it would be used more for rough cuts anyway, and it more than meets that expectation. Its lightweight, but doesn't feel overly cheap. Perfect for DIYers. I'm content so far with my purchase.

    • c64 on 19/02/2024 - 10:45

      how hard was it to undo the blade bolt? apparently they are on tight. i believe it is also (reverse) LH thread

      • jaybees on 19/02/2024 - 15:39

        This video was helpful. https://www.youtube.com/watch?v=nIaY4NeGoPE. The guy had to use a hammer to loosen his bolt. I used a t-handle hex wrench with much grunt (but I did allow the WD40 a few minutes to soak in). Hope this helps.

        • c64 on 23/02/2024 - 12:36

          thanks. it turned out to be much easier than i was expecting. i loosened the screw and bolt as per the video to get access to the blade bolt. i decided to give it a trial using a bicycle allen key tool thingy and the blade bolt loosen without much effort.

  • marko62 on 23/02/2024 - 09:42

    The store at Bargara has 4 in stock

Login or Join to leave a comment
Login Join