This was posted 2 years 9 months 1 day ago, and might be an out-dated deal.

Related
  • expired

Creality3D Ender 3 V2 3D Printer A$297.99 Delivered (AU Stock) @ Creality3D Official

172
Creality3D Ender 3 V2 3D Printer A$297.99 Delivered (AU Stock) @ Creality3D Official
Go to Deal
Clear on 24/02/2022 - 23:07 creality3dofficial.com (885 clicks)
Last edited 25/02/2022 - 01:45 by 1 other user
CA-3DP15

Low price on the popular Ender 3 V2 3d printer and if you set the currency to AUD on the website it ends up being a lot cheaper than the USD price once converted to AUD. It also ships from their AU warehouse.

The Ender 3 V2 has a 220x220mm print size with a heated bed. It's never too late to 3D print and a hobby I took up a few years back. The Creality printers are usually regarded as the best and more affordable printers out there. They have a big community following and countless models available online to print.

  • Apply coupon CA-3DP15 at checkout
Electrical & Electronics 3D Printer Creality

Related Stores

Creality 3D Official Store
Creality 3D Official Store

closed Comments

  • jv on 24/02/2022 - 23:39

    Low price on the popular Ender 3 V2

    It's often around $280 when ebay do a 20% off sale.

    That's how much I got mine for last year.

    • Lizard Spock on 24/02/2022 - 23:42
      +9

      What do you print with yours jv? This is my print I am most proud about so far, with my Ender3 Pro.

      Lizard Spock on 24/02/2022 - 23:42 (Collapsed - Offtopic. Show)
      • Clear on 24/02/2022 - 23:51
        +1

        Whoa that's seriously impressive. Nice work.

        • Lizard Spock on 24/02/2022 - 23:53
          +2

          Thanks 😊
          I'm thinking about doing terminator arm next: https://www.thingiverse.com/thing:2886923

          • Clear on 25/02/2022 - 00:02
            +1

            @Lizard Spock: The dinosaur is definitely better looking than that I think. Not sure if you can top it!

            • jv on 25/02/2022 - 00:11

              @Clear: That sounds like a challenge

          • ThePasserby on 25/02/2022 - 03:35
            +1

            @Lizard Spock: if you do this, I'd suggest that you do it in resin.
            https://www.youtube.com/watch?v=cgVMxwe8NDo&t=140s

            Don't think you need to understand French to understand what's going on in the video… Except at 10:30 in the video the girl says that you have to mix the 2 part resin very well or you'll end up with a sticky product.

          • bamzero on 25/02/2022 - 04:28
            +1

            @Lizard Spock: OK.. now I know my next project :) Usually just print functional things but about time I made something else..

            Many years ago I planned to make a terminator arm for my old man, had started collecting metal rods from broken printers and stuff to use, but decided it wouldn't look any good anyway. One day came across this which he loves, my only regret is not buying two at the time. I'd be happy if I can get a decent looking version printed (and tbh I like the look of this one better than the T2 one).

      • jv on 25/02/2022 - 00:11
        +1

        Nice…

        I just print gadgets i find useful…

  • Bob81 on 24/02/2022 - 23:39
    +1

    The Voxelab Aquila X2 3D Printer (Ender 3 V2 Clone) Is arguably a better printer and works out $20 cheaper with the coupon code at Amazon

    Comparison Video

    • Cyb3rGlitch on 24/02/2022 - 23:45
      +3

      The Ender V2 is a much better option. The Aquila printers now use clone STM32 chips which have buggy serial connections (issues connecting via USB), and can't load custom firmware. It'll cost much more than $20 to replace with a higher quality board.

    • ntb on 25/02/2022 - 08:03

      No if you get yourself a H32 board.

  • nickch on 24/02/2022 - 23:59
    +6

    Can't seem to get it at that AUD price.
    Everytime I proceed to the last payment step, it reverts back to USD, and Paypal or Worldpay charges you in USD.

  • Ausdave on 25/02/2022 - 00:58
    +1

    I advise people to buy through PayPal.

    They have a very long track record of bad customer service when you have an issue.

    You can search 3d printing and/or Creality Facebook groups for bad experiences.

    • Tacooo on 25/02/2022 - 18:16
      +1

      And PayPal doesn't have a bad track record of (profanity) customers and sellers alike?

  • highground on 25/02/2022 - 02:11
    +1

    With the Ender 3 S1 released, I imagine there might be a lot of price reductions on these models.

    • Kill Joy on 25/02/2022 - 10:56

      Not really, at least until the S1 drops in price.

  • skegger on 25/02/2022 - 08:37

    I'm waiting for the Anycubic Vyper to drop in price. Similar set up, bigger bed and in built strain gauge bed levelling.

  • cheepo on 25/02/2022 - 12:46

    Other then trying to troubleshoot it yourself via online resources….is there anywhere locally (in Melbourne) I could take my Ender to get it back up and running?

    • Tacooo on 25/02/2022 - 18:16
      +1

      Facebook groups. Find someone on there who will help you.

      • cheepo on 28/02/2022 - 08:32

        Cheers. 👍

  • BreadBoy on 25/02/2022 - 23:13
    +1

    I was unable to purchase at A$297.99 price. At the Confirm information stage it changes it back to USD price of $ 222.70 which paypal charges A$327.02 at that point you may consider getting it $349.80 on Amazon with Prime for faster delivery.

  • wfdTamar on 07/03/2022 - 16:18

    Just tried this and it came out as US$222.70 (A$301.82). So the code does work, but as you're paying in US$ the conversion may vary.

Login or Join to leave a comment
Login Join