This was posted 3 years 12 days ago, and might be an out-dated deal.

Related
  • expired

Lytmi Neo Sync Box, HDMI 2.0 4k/60hz, HDR 10+, Dolby Vision CEC US$143.65 (~A$199) Delivered @ Lytmi

70
Lytmi Neo Sync Box, HDMI 2.0 4k/60hz, HDR 10+, Dolby Vision CEC US$143.65 (~A$199) Delivered @ Lytmi
Go to Deal
Associateddenghongterry on 10/12/2021 - 13:03 ilytmi.com (916 clicks)
Last edited 20/12/2021 - 16:32 by 2 other users
xmasale

Upgraded Model - HDMI 2.0
Seamless sync experience with Neo sync box, support high quality video: 4K/60Hz, HDR 10+, Dolby Vision.

Upgraded Lightstrip
The upgraded light strip is now equipped with a special designed silicone diffuser, enabling the light to shine a larger area due to an illumintion angle shift from 90° to 45°.

Fit All Screen Size
The light strip is cuttable design, make it easy to attach to the back of screen in any size. The Neo box will auto calibrate the light strips

Accurate Color Reproduction
Neo can process up to 500 pixel dot and apply them to lightstrip with ARGB LED, to ensure the high accuracy of color reproduction in sync mode.

CEC Enabled
Consumer Electronics Control (CEC) Feature. Use only one remote controller to turn on/off TV, Neo box and other HDMI connected devices.

Black Bar Auto Refill
Neo equip with auto refill function, automatically compensate the light for the black side of the movie, giving you the perfect home theater atmosphere.

Electrical & Electronics LED Strip Light

Related Stores

Lytmi
Lytmi

closed Comments

  • WesthamAreMassive on 10/12/2021 - 13:35

    Looks pretty cool but I don't think I could handle colours around the screen changing all the time

    • krisspy on 10/12/2021 - 14:27
      +1

      It's suppose to mimic the colors on the TV, so it kinda makes your TV look bigger

    • superroach on 10/12/2021 - 14:30

      It blends in, it helps rather than is jarring

    • FuRyZ on 11/12/2021 - 11:02
      +1

      It depends, worth playing with the settings to dial in your preference. I found the high speed setting and max brightness to be uncomfortable. The low speed setting was too slow and laggy. I have mine set to the normal speed setting combined with half brightness and that really helped the system blend into the screen visuals.

  • Hinee on 10/12/2021 - 14:20

    Ha - even cheaper than the recent black friday deal. How much lower will this get?

  • BillyG687 on 10/12/2021 - 14:36

    This doesn’t work if you’re using built in apps on your TV. Is that right? Or is there a way to send the signal to the box at the same time?

    • Darkscythe on 10/12/2021 - 14:38

      No way to get at the signal using the apps on the TV. You'd have to use a Chromecast with Google TV or similar.

    • ItsBatman on 10/12/2021 - 17:19

      you can get Govee immersion kit and have to place the camera on top of the TV so it mimics the colors and does the same thing as this box You can use built-in apps on your TV

  • Alphaduck99 on 10/12/2021 - 15:12

    Meh! $AUD8 cheaper than what I paid on Black Friday (or maybe the aud has dropped since then).

    • socheap on 10/12/2021 - 15:30

      thoughts/review?

      • Alphaduck99 on 10/12/2021 - 16:00

        Hasn’t arrived yet - shipped last week allegedly

      • Alphaduck99 on 16/12/2021 - 19:54
        +2

        It arrived today (16th) and took about 30 minutes to physically setup - tv off wall, run 2 x led strips around tv edge and trim to size, attach box to back of tv and run power lead down to plinth. I did spend 30 minutes beforehand working it all out so maybe an hour in total.

        Connected to new Xbox X (thanks to ozbargain the other week - ebgames preorder came through early on Tuesday) and it just worked.

        It looks just like the vids on YouTube, super responsive and never misses a beat. Very happy.

        • Boumba on 21/12/2021 - 18:27
          -2

          Personally pretty disappointed in the product.
          received yesterday and went to set it up straight away.
          Ordered 65inch as that's my TV size. Even measured it before hand to make sure.
          If you put the clips on the edge of the TV all round the LED strips end up being too short. By about 10cm each, not a small amount. So I had to remove the double sided taped clips, not an easy task, and put them all spaced about an inch and a half in from the edge.
          You can use them without the app, if you put the starters at the lower right corner.
          But there was a noticeable quarter second lag on the lights. If there is a scene/picture change the lights can be quite distracting, as it's not in sync.
          I thought it might be because I hasn't used the app to configure them. But I can't even get that to work either.
          Fair warning, the app says it requires GPS, Bluetooth, and local network access. Giving it all that I still couldn't get it to connect with the lights, and gave up after about 3 hours of fiddling around.
          I used the lights to watch about 2 hours of YouTube, and a couple of TV episodes before disconnecting them due to not being able to concentrate with the sync lag.
          In my opinion, this is just another cheap Chinese product (that also harvests your data) that's overpriced as it's one of the first on the market.

  • CantonasKungFuKick on 10/12/2021 - 16:45

    Does this need a white wall behind the TV i.e. will colours be skewed if TV is on a coloured wall?

    I presume 1 HD cable from PS5 to the box and then one HD cavle from TV to box?

    • ItsBatman on 10/12/2021 - 17:23

      you can use hdmi splitter to work for more devices

  • jamba on 10/12/2021 - 17:25

    i like this model better than Govee because it can go up to 120" for a projector screen. Want to use mine with HDfury vertex 2

  • jphan on 10/12/2021 - 18:02

    Anyone know if it supports 1440p 120hz/ 1080p 120hz? Might jump the gun even though it’s not hdmi 2.1 as 4K 120hz is so rare anyways

  • Monsta-AU on 10/12/2021 - 18:05

    Also a good review on this from Paul Hibbert.

  • sicaboy on 27/12/2021 - 09:48

    Totally missed out

    • Tardvark on 27/12/2021 - 13:24

      Discount code still works for me?

      • sicaboy on 27/12/2021 - 14:18

        Oh yes it does! Thanks

  • Tardvark on 27/12/2021 - 13:25

    Do these support ARC/eARC? On some forums I've read that while CEC works fine, ARC/eARC does not work between devices with this in between.

  • sicaboy on 27/12/2021 - 14:20

    I have a 65 inch TV. If I bought the 60 length one, is it long enough if I just make a smaller loop?

    • Associateddenghongterry @ Lytmi on 27/12/2021 - 18:13

      Yes, you can.

  • sicaboy on 13/01/2022 - 23:33

    Today I got my order delivered. There is a noticeable delay (latency) pretty much the same latency with the previous version that the YouTuber mentioned even it’s HDMI2.0. The video is great without any latency but the light strip does. I’ve checked the firmware in the app and it’s up-to-date.

    Does anyone know how to improve the latency?

  • sicaboy on 15/01/2022 - 11:59

    Ok it seems like a common issue that everybody is facing. https://www.reddit.com/r/dreamscreentv/comments/s3s82l/do_no…
    (The video in the link above shows how long the latency is)
    I have browsed Lytmi community and they don’t seem to understand what the latency is about by just explaining the “3 modes” while the latency exists in all modes. I’m very disappointed if they have no plan fixing it.

Login or Join to leave a comment
Login Join