Voxelab Proxima 6.0 2K Mono Resin 3D Printer US$151.80 (~A$210) Delivered @ Flashforge3DP.com

70

Go to Deal

AssociatedFlashforge on 27/08/2021 - 19:00 flashforge3dp.com (554 clicks)
Last edited 27/08/2021 - 19:56 by 1 other user

FVREDDIT

FLashforge #backtoschool discount.
The lowest price at this product range.
Discount code: FVREDDIT.

Related Stores

Flashforge

• 

  BlitzR on 27/08/2021 - 21:18

  If anyone needs filament, their PLA+ is pretty good quality and very well priced. I purchased a 3 rolls from amaon recently and was very impressed.

  • 

    liantoh on 27/08/2021 - 21:34

    agreed

• 

  CoenJC on 27/08/2021 - 21:21

  Tempting!

• 

  Russ on 27/08/2021 - 22:34

  +1

  Their Polaris resin printer is almost identical, and is cheaper: US$130 after discount (~AU$180).

  At a quick look, the Proxima has "Assisted bed leveling system", the Polaris model doesn't mention this. There may be other differences. Anyone have experience with the Polaris model?

  Link to Polaris model: https://www.flashforge3dp.com/collections/voxelab-resin-3d-p…

  One-hour-long review of Polaris model on Youtube: https://www.youtube.com/watch?v=XSlofiAx4c0

  • 

    impoze on 27/08/2021 - 23:22

    The proxima is a mono LCD screen which will last longer and would be worth the extra $30

    • 

      Russ on 28/08/2021 - 00:14

      Polaris is mono too:

      LCD Screen Type 6-inch 2K Monochrome LCD

      Edit: the "Tech Specs" listed under the Polaris are for "Model Proxima 6.0", they've incorrectly copied the specs from the Proxima page.

      Polaris does have a colour LCD, says so lower on the page.

• 

  IsometricBacon on 28/08/2021 - 08:47

  New to resin printers but have been printing fdm on a Prusa for awhile as a hobby.

  Any particular point of comparison for their versus a AnyCubic Mono or Elgoo Mars equivalents?

  Wondering if this would be good enough or I'll regret not getting something else later.

  • 

    impoze on 28/08/2021 - 09:13

    Check out the new elegoo 3 mars review

    They don't seem that much more to go with an anycubic, elegoo or similar

• 

  brocky2006 on 28/08/2021 - 10:12

  +3

  Very tempting OP. Have been eyeing this model

  Any chance of including 1L resin for me to seal the deal?

• 

  choosk on 28/08/2021 - 17:25

  Thanks OP, got one - should be a good upgrade from my filament printer