This was posted 3 years 6 months 19 days ago, and might be an out-dated deal.

Related
  • expired

Flexible Ultrabase Bed for Ender-3, JGMaker Magic 3D Printers US$15 (~A$20) + Delivery @ JGMaker

20
Flexible Ultrabase Bed for Ender-3, JGMaker Magic 3D Printers US$15 (~A$20) + Delivery @ JGMaker
Go to Deal
Employeeronald6c on 03/06/2021 - 19:06 jgmaker3d.com (111 clicks)
Last edited 03/06/2021 - 21:10
ozultrabase

Ultrabase is one of the best build surfaces for 3D printing. It’s got a nice grippy surface, which is enhanced with a little heat, that holds your objects well while they’re being printed. But it could be a little hard to remove your print once it's done, even after everything has cooled down. A spatula was the weapon of choice for removing prints from this surface. But if you're tired of those late-night trips to the emergency room for stitches in your ancillary hand, the JGMaker Magic PVC Build Surface might just be what the ER Doctor ordered.

It’s removable with the 4 included clips and it’s flexible. So instead of jamming the spatula into your print, or your hand, you can just flex the build surface to release your print. So if your old Build Surface has expired, or you have a printer with a 235mm*235mm heated bed, buy the JGMaker Magic PVC Build Surface with 4 Clips today! Doctor’s Orders.

Fit:
JGMaker Magic Printers, Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro. (235x235x4mm)

Package Includes:
Flexible PVC Build Plate with 4 Clips

Note:
* Items will be shipped from China, no extra custom fee, estimated delivery time: 10-15 days
* If you still want the ultrabase glass bed instead of the flexible bed: https://www.jgmaker3d.com/products/magic-build-plate?variant…

Electrical & Electronics 3D Printer Parts

Related Stores

JGMaker
JGMaker

closed Comments

  • blueastro on 03/06/2021 - 21:47
    +1

    How different is its surface from the carborundum bed of the Ender 3 v2's?

    • pinchies on 03/06/2021 - 22:50
      +2

      Edit: I was reading the wrong info. This deal looks like it is for a flexible PVC style magnetic bed, not the glass "ultrabase" style bed. Basically, easier to get the first layer to stick, but a little harder to remove the print afterwards — I would say perhaps better for beginners? This style of bed are pretty good for PLA, PETG and ABS, and being flexible helps to remove the parts from the bed. However, the parts are normally still stuck down even when cooled down, unlike the glass carborundum beds.

      All of these black coated glass beds are basically the same, typically its a silicon carbide glass frit that's added. Should fit Ender 3 series, JGMaker Magic, and also the Geeetech A10 series of printers too — any printer with a 235mm square bed. Cheapest on amazon looks to be about $39 at the moment, but obviously it takes a fair bit longer to come from China.

      • blueastro on 04/06/2021 - 09:01
        +1

        Oh awesome dude, thank you for the detailed explanations. I've had trouble with the first layer adhesion, and therefore had to manually adjust the print speed to 10% every time otherwise it won't stick. This would probably help, just ordered! :)

Login or Join to leave a comment
Login Join