This was posted 3 years 8 months 23 days ago, and might be an out-dated deal.

Related
  • expired

Inkbird Aquarium Temp Controller ITC-306T $28.99 Delivered @ Inkbird eBay

100

Inkbird Temperature Controller ITC-306T $28.99 delivered from Inkbird’s ebay store.

Was in the market for a new controller and noticed that Inkbird had theirs for sale even cheaper than normal. Seems it’s the lowest price it’s been from what I can gather? I’ve used a heap of their products now and not been disappointed. For the price it’s hard to justify going for the more premium brands.

Info from the eBay page:
Great For
aquarium
brewing
greenhouse
reptile keeping
incubation
planting seed starter etc.

Main Features:
-Plug and play design, easy to use;
-Dual time cycle setting during 24hours, can be set different temperature from day and night on the basis of the physical needs of animals and plants.
-Support Centigrade or Fahrenheit unit reading modes.
-Maximum output load: 2400W.
-Dual display window, be able to display measured temperature and set temperature at the same time;
-Temperature calibration;
-Over-temperature and sensor fault alarm

Specification:
-Temperature Control Range : -50~99 °C / -58~210 ° F
-Temperature Resolution: 0.1 ° C / 0.1° F
-Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
-Temperature Control Mode :On/Off Control, Heating(only)
-Input Power: 100 ~240VAC, 50Hz/60Hz
-Temperature Control Output: Max.10A, 100V ~240V AC
-Sensor Type: NTC sensor (Including)
-Sensor Length: 1.9m / 74.8 inch
-Input Power Cable Length: 1.5m (5ft)
-Output Power Cable Length: 30cm (1ft)
-Dimension: Body: 140x68x33mm (5.5x2.7x1.3inch)
Socket: 85x42x24mm (3.3x1.7x1inch)
-NET Weight: About 0.35kg (0.77lb)
-Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
-Storage: Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity: 20~85% (No Condensate)
-Warranty: 1 Year

Package Contents:
1 x ITC-306T temperature controller;
1x Plastic Sensor
1 x Manual

Related Stores

eBay Australia
eBay Australia
Marketplace
Inkbird
Inkbird

closed Comments

  • +1

    I found that I needed cooling mode more this summer, as water was way about 25-26 I run in winter with heaters.
    If I would get another one now, I would get one with heating+cooling - ITC-308S

    • Yeh true that’s a good point.

    • +1

      Definitely recommend the heating/cooling model. Use one for my aquarium fans/heaters and it works a treat.

      • +1

        I got the heating only so ended up hooking the fans to the timer board that controls the light, so it only runs during the day. Worked out ok for now but I had to do a diy small computer fan otherwise water evaporates too quickly with bigger fan setup. Missing my sold 3d printer now =( when I had it could not find the things to print but as soon as its gone, I miss it =)

    • And how much is that itc 308s.
      What fish do you have?

      • about $50

Login or Join to leave a comment