A solid alternitive for a custom loop to cool the GPU you can just attach a AIO on it
CamelCamelCamel.
FYI there doesn't appear to be word yet from NZXT as to whether it will be compatible with any of the 30 series cards but they are working on it - https://www.reddit.com/r/NZXT/comments/ipeicr/despite_the_co…
At this point, only buy this if you're looking to cool an older card as I wouldn't bank on it working.
cheers, already have one myself for my 1080 Ti. hate air coolers on GPUs
doubt it will fit FE as its really packed (unless a plate is available to cover RAM and VRM) but maybe others.
hate air coolers on GPUs
You need a variant of a card which has better cooling built into it in the first place. In my opinion it would workout better than buying a normal card and diy upgrading cooler later on potentially voiding warranty…
true. probably strix based cards with triple fan setups, but then again i cant splurge out on new gpus, most of my buys are used anyway (unless i can make good deal selling the old gpu)
Nice! Normally about $65 delivered for me.
I had a G10 on a 1070 I do miss that with Kraken cooler was whisper quite 25deg idle and 55deg overclocked on load!
I didn't even know this was a thing. Radical.
Had one of these on an RX480 with a H80i (<$50 used) at 1450 core, 2000 memory. Ran nice.
Beware the ram heatsinks don't fit under the waterpump block with some AMD cards. You can grind them down (I'd recommend for GDDR5 at 1750+) or leave them off.
The other thing is you'll have to run a second fan on brackets like these https://www.aliexpress.com/item/32953847875.html if your VRM is up near the rear bracket.
Bought it for $50 12 months ago and has been going strong on my 1080ti. Just hope it works on the new 30XX cards!
Will this fit my msi rtx 2080 super ?
I've heard that it does fit on Nvidia 20 series, just that you need to use the AMD bracket.
Mounted fine to my 2080TI with the AMD Bracket. Depending on the power connectors it may be a tight fit.
If there was confirmation it supports the new cards I'd be all over this
beware that this thing doesn't do the best job of cooling VRMs and just relies on airflow. I had one of these previously. You can get little heatsinks from Jaycar and apply thermal glue to set them to the card and that does the trick.
It looks like the XBOX series s.