Stanfred Vehicle Stands Pin Type 1200kg $20 & More @ Repco

160

Go to Deal

thydzik on 07/10/2019 - 00:22 repco.com.au (551 clicks)
Last edited 07/10/2019 - 00:45 by 1 other user

Was looking at a car stand to change radiator hoses, found these at Repco.

Clearing them out for newer models.

12 months warranty.

Stanfred Vehicle Stands Pin Type 1200kg $20
Stanfred Vehicle Stands Ratchet 3000kg $50
Stanfred Vehicle Stands Twin Pin 1500kg $35
Stanfred Vehicle Ramp Set 850kg $69
Stanfred Vehicle Ramp Set 4X4 $129
Stanfred Vehicle Stands Pin & Screw 1800kg $45
Stanfred Vehicle Stands Pin & Screw 4000kg $85
Stanfred Vehicle Stands Pin Type 2000kg $40
Stanfred Vehicle Stands Twin Pin 3000kg $55
Stanfred Vehicle Stands Ratchet Screw Type 3000kg $55

Related Stores

Repco

• 

  jv on 07/10/2019 - 00:33

  -1

  Was looking at a car stand to change radiator hoses,

  Just get a HQ Kingwsood 202 and you won't have to worry about stands…

• 

  Owgasm on 07/10/2019 - 00:38

  Ratchet or pin?
  What weight would one need?

  Tough choices.

  • 

    bogak on 07/10/2019 - 00:47

    Pin, more than what your car weighs in case you end up needing to sit the car on 4 stands. Also make sure the height suit your needs. Can obviously test this by jacking up your car from minimum height to a point where you able to change the tyre, to max and measure the heights.

    • 

      MasterScythe on 07/10/2019 - 00:52

      You mean more than what 1/4 of your car weighs, if you need all 4 under it.

      Usually 50% of your car weight is super overkill.

      • 

        bogak on 07/10/2019 - 00:59

        +1

        Sorry i just thought what i said is quite clear. If a pair of jack stands can handle 1000kg then two pairs can handle 2000kg. As long as your car is not anywhere close to 2000kg you're good. But as usual stick your wheels under the car along with the jack stands if you decide to go under it.
        Edit: How much more is up to you, for what i know, everyone just normally buys the 3 tonne stands as it'll cover pretty much every car you'll ever own.

        • 

          [Deactivated] on 07/10/2019 - 13:34

          -1

          @bogak: Yep, if you're going to get under a car max capacity is a good starting point. Give me overkill over kill (as unlikely as it is) any time. Pins are okay obviously (esp twin pins) but I prefer my screw threads where the load is distributed. Not generally available these days.

          Good price for the 1200 and 1500kg double pin models

          • 

            [Deactivated] on 08/10/2019 - 11:46

            @[Deactivated]: That you stalking me with your negs now gimmeabreak? How did the Craft Cartel vote go? Worked out the simple arithmetic yet?

  • 

    thydzik on 07/10/2019 - 11:08

    I don't think ratchet or pin makes too much difference. Pin is easier to lose though.

    have a look at the rating of your jack, mine was 1000kg for a 1500kg vehicle, so 1200kg (each stand) was enough for me.

• 

  Calvin27 on 07/10/2019 - 10:43

  How easy are the ramps to use with one person and average driving skill?

  • 

    Nom on 07/10/2019 - 12:11

    Neither of my normal cars come anywhere close to being able to use ramps like these - the front bumper hits the ramp long before the wheels get near.
    I had to make my own from some treated-pine beams…

    If you aren't driving something with massive ground clearance, then take some measurements before you buy.

  • 

    OneTonneRodeo on 07/10/2019 - 12:25

    It can sometimes be difficult to get them to stay still when you first make contact to drive up them - that is, they might drag/push along the ground, instead of stay steady, even with the 'grip' thing they adverstise underneath. If you can put another type of material under them, like carpet or something a bit course, that can help provide friction to keep them in place as you make contact, and then the weight of the car will obviously secure them

• 

  magic8ballgag on 07/10/2019 - 11:35

  I have had a pair of these stands for over ten years and they are still going strong (does this go without saying)?

• 

  datlcmaulen on 07/10/2019 - 12:09

  Is that a pair or just 1? Doesn't say on their site.

  • 

    OneTonneRodeo on 07/10/2019 - 12:21

    +1

    Pair - had a look at them in person yesterday.

    Also, in the pic with the box, at the bottom it says 1 x pair :)

• 

  Kranbone on 08/10/2019 - 02:58

  SCA also have some stands on special.

  https://www.supercheapauto.com.au/p/sca-sca-car-stands---pin…

  These automotive deals have been great. I'm sure the stores still make some money but I've spent bucketloads on the cars in the last 3 months.

  • 

    bogak on 08/10/2019 - 08:33

    that's old prices and there's no stock anywhere, if you list all car stands that does not come up.
    current listing