10% off All Zipato Brand Products + Free Express Shipping @ Capital Smarthomes

Related Stores

Capital Smarthomes

• 

  markmo on 07/10/2016 - 13:59

  Does the Zipato Double Switch Module support toggle switches?
  The manual says the following which im assuming means it does:

  3.4 | EDGE AND PULSE MODE
  Manual switch S1 and S2 can set to Edge mode or Pulse mode or
  Edge-Toggle mode, default value is Edge mode.
  3.4.1 | EDGE MODE
  This mode is suitable for the bi stable wall switch that has indicator
  point on the Micromodule, and the same position correspond to
  same state of relay1 and relay2. if the Switch’s relay changes the
  state because of receiving Z-Wave RF command, it may need two
  switchings (switch on to off or switch off to on) to let relay back to
  the corresponding state.
  3.4.2 | PULSE MODE
  this mode is suitable for the toggle type wall switch to swap the
  state of Relay1 or Relay2.
  3.4.3 | EDGE-TOGGLE MODE
  This mode is suitable for the normal bi-stable switch, every state
  change of the wall switch will also swap the state of Relay1 or
  Relay2.

  • 

    AssociatedCshomes @ Capital Smarthomes on 07/10/2016 - 14:06

    Hi Markmo, yes it does support toggle switches. Generally you will want to set this paramter to (3) Edge toggle mode so that regardless of the previous zwave set state pressing the connected toggle switch will change the state of the device.