40% Discount is applied at checkout. Buy in store, Free C&C or added delivery fee.
Don't forget to stack with 6% off Woolworths WISH eGift Card
HPM Excel Double Powerpoint - White CDXL777WEWE $7.77
A little annoyed that Jackson 2 Outlet Powerpoint with USB Charging has been changed to a clearance item and isn't included.
Return them if yo havent used them and recycle
Any idea when this ends? I can't find that info.
Front page says 30.06.16
Cheers
Damn the USB chargers is the only reason I clicked on the link. :(
damn me too, was going to change all the lounge ones
Beware, these USB chargers might not be very fast ones.
the jackson that is now a clearance item would have been a 2.1A USB outlet though I didn't need the fast ones, mainly wanted for added convenience charging PS4 controllers
none are on sale anyways
are we allowed to do that ourselves or had to get electricians?
by law you need an electrician
by law you need an electrician
Only in Australia because apparently we're too stupid, pretty much everywhere else in the world you can do all sorts of electrical work from changing a GPO up to rewiring a house in some countries.
sorry but that's simply not true, I'm not trying to be argumentative but there's a very good reason why we have licenses for electrical work…..and there's a lot more people alive in Australia because of it
sorry but that's simply not true, I'm not trying to be argumentative but there's a very good reason why we have licenses for electrical work…..and there's a lot more people alive in Australia because of it
It is true. Electrical deaths are lower in places like the UK and NZ where they allow limited electrical work.
Here's some stats from NZ that had the same restrictions as Australia and the same death rate but when they lifted the restrictions the death rate dropped - http://www.theyworkforyou.com/debates/?id=2005-03-16a.243.6
Argue all you like, the fact is that the death rate is lower in countries that allow electrical work.
genuinely interested in that one, can you shoot me the source?
Just posted the NZ example in the post above but the other examples are similar.Australi, has the largest death rate from electrocution.
Also in places like NZ even though you could do some 'minor' electrical work it still needs to be inspected/certified by an electrician so considering how much sparkies charge /hr + callout in Aus I'd say the savings would be very small if we had similar laws here.
Also in places like NZ even though you could do some 'minor' electrical work it still needs to be inspected/certified by an electrician so considering how much sparkies charge /hr + callout in Aus I'd say the savings would be very small if we had similar laws here.
If you rewired a whole section of the house or circuit yes it needs a basic inspection by an electrician but this might cost you an hour to two as opposed to it costing you dozens of hours for them to do the work.
As for replacing GPO's, light fittings and switches this doesn't need to be inspected.
Cost of replacing a single GPO in Australia - $150 to $200
Cost of replacing a single GPO in NZ - $10 to $20
Can you pls provide a source that says switches/gpos don't require inspection in NZ? Genuinely interested.
PS: I'm all for doing your own stuff as in many cases I would pa far greater attention to detail than a lot of sparkies. Seen so many botchy jobs.
Can you pls provide a source that says switches/gpos don't require inspection in NZ? Genuinely interested.
I've already posted that information.
PS: I'm all for doing your own stuff as in many cases I would pa far greater attention to detail than a lot of sparkies. Seen so many botchy jobs.
The below is what you can do in NZ. The only work that requires an electrician to inspect is adding to the wiring.
There is a limited amount of electrical work you can do when it comes to wiring in your own home. This is listed in regulation 64 of the Electricity (Safety) Regulations 2010 and includes:
Replacing switches, socket outlets, lamp holders, ceiling roses, water heater switches, thermostats and elements.
Repairing light fittings.
Moving, repairing or replacing flexible cords connected to permanently connected outlets or ceiling roses.
Disconnecting and reconnecting permanently wired appliances.
Moving switches, sockets and lighting outlets, but only if they are wired with tough plastic-sheathed cables.
Installing, extending, or altering any cables (except the main cables that come from the street to your switchboard). You have to get the finished job checked and tested by a licensed electrical inspector. You cannot connect your work to the electricity supply yourself. The inspector will connect it, test it, and issue you with a Certificate of Compliance (see below) if it complies with safety requirements.
Fitting plugs, cord extension sockets or appliance connectors to a flexible cord.
Replacing fuse wires and fuse cartridges.
Repairing appliances.
Before you do any work, make sure:
You have the necessary knowledge and skills.
The power is turned off.
You are not anywhere where conductors or terminals are live or could become live.
When something goes wrong
If you think something has gone wrong, make sure the power is off and contact a licensed electrician. Otherwise you risk injuring yourself or someone who lives with you and you could be prosecuted and fined $10,000 (section 163 of the Electricity Act 1992).
There are training providers (like technical institutes) that run courses for people wanting to do their own electrical work at home.
@Maverick-au: we do have a lot of stupid people in this country.
I mean look how ridiculous our OH&S rules are in workplaces
The other way of looking at it is that people become stupid because of these types of rules/laws. Just the way the govt likes them anyway.
@gimme: I'm all for removing many warning labels and thus removing the problem but that's apparently unhumane
If only HPM outlets looked similar to Clipsal :|
Well do they look 93% similar because they're a rip-off of Clipsal and always have been.
My builder used HPM, it's cheap junk :(
Different size so you will need to get out the paint brush.
Time to buy some new circuit breakers and change out the one port outlets.
Why are you buying new breakers to change the outlets? Or they are just separate things
Separate.
breakers not discounted :-(
Oy vey :(
5 double power points for $8 thanks
Now you will need to spend $500 to install them all
Not cheap even with 40% off.
Plus, you're better off buying Clipsal GPOs and Switches.
am in the electrical industry and know that HPM Excel Double Powerpoint is an absolute ripper deal
so you're saying the HPMs are better than clipsal? I can get clipsal for $8 on ebay (= approx $9 postage for multiple items) + sparkydirect below.
Also whilst not 100% identical normal price is cheaper for the example double power point
https://www.sparkydirect.com.au/p/932576/double-gpo-power-po…
Clipsal cheaper and probably better elsewhere
https://www.sparkydirect.com.au/p/932427/double-gpo-10amp-25…
Sparky direct is an overnight company that's selling a number of no-name products…you watch..as soon as shit hits the fan with one of their Asian cheapo products they'll vanish off the face of the earth
Sparky direct is an overnight company that's selling a number of no-name products…you watch..as soon as shit hits the fan with one of their Asian cheapo products they'll vanish off the face of the earth
They've been around for a while and they sell many products from Clipsal etc.
There are plenty of electricians fitting rubbish from Asia to make more profit.
Been around for a while and stock many known brands.
The Jackson USB has been on clearance for a couple of weeks now.
Been eyeing off some fancy new powerpoints and at 40% off silly not to grab them. Hopefully they will get delivered.
Does anyone know what SPM (not HPM) is like? Is it really cheap and nasty (i.e ebay crap with an Aus compliance) or is it half decent? Otherwise in the long run I feel more comfortable forking out a bit more for Clipsal. The tightarse in me needs to rationalise though.
Go Clipsal.
You can find it for not much more than 40% off SPM.
Clipsal prices are insane. Doesn't justify the extra. In the end they all just sourced from China
It may be SOURCED from China but we all know with named brands like Clipsal at least their SAFE for Australia…. electrical is one thing I wouldn't be too frugal with considering my home/family and insurance….BBUUUTTTTT there's always a middle ground that can be reached when choosing electrical products
:) :)
The price for discounted SPM standard (5 for $8 after 40% off) is really hard to beat.
I'm keen on some Dimmer Switches…
Can anyone tell me the difference between:
HPM Standard 200W Dimmer Leading Edge CD200LWE
HPM Excel 400VA Leading Edge Light Dimmer - Matt White
Both are Leading-Edge, but $25 difference in price (Before discount)
Worth the extra $25 for Excel instead of standard?
Flicker free
Quiet operation
Soft-start - lamp turns on gradually to increase lamp life
Over temperature protection
Worth the extra $25 for Excel instead of standard?
That would depend on the application. Is the standard style causing noise or flicker for you?
I have 4x13w LED down lights to run off a trailing edge dimmer, which one should I look at?! They don't currently flicker but they're running off 100% power
Trailing? then I think you only have the more expensive option.
But are you sure the LEDs won't work with a standard leading-edge dimmer?
Standard dimmers use a triac, i think. Not a nice output waveform. The excel is more modern, with a controller chip.
Electrical noise is probably not an issue in the home.
But with 40% off, its only a $15 difference.
Yeah I think I'll just go the more expensive one to be safe.
The downlight box just says its dismantle from 3-100% with a trailing edge or universal dimmer.
@dingdong555:
Ok, then you definitely cannot use the cheap dimmer. They are leading-edge only. You do not want leading-edge technology here.
That's probably worth the extra $25 ($15 after discount). Thanks
Thanks, bought 10 items. Good to have spares and make sure you get the same brand as installed in your house to match. e.g. HPM.
images comparing clipsal vs hpm classic powerpoints
http://updates.clipsal.com/assets/images/products/A00021793.…
https://media1.masters.com.au/media/MASTERS/Product/1000x100…
…
Does anyone know how long it takes for a C&C order to be ready?
Not sure whether it is different for each Masters. My local one (SE Melbourne) typically takes 3 - 5 days until I get the "Ready for collection" email. Not quick at all…
Mine is generally within a day (Northland)
Well it took a week to get the pick up notice. At least it wasn't cancelled
Damn bought a heap of dimmers last week from bunnings, could of saved a heap.