• expired

Nitecore EA41 1020 Lumen CREE XM-L2 T6 LED US$44.73 (~ AU$58) + Free Delivery @ FastTech

150
DEALS

What should I do with all my Eneloops you ask? Chuck em in this little beast!

So I have been looking up torches for the past few days, and came across this bargain. I've been using my Nitecore EA4 purchased from a previous bargain (https://www.ozbargain.com.au/node/91140) for the last couple of years, and it has been a great little torch! The EA41 (2015) is basically an updated version of the EA4, with more Lumens and better switche(s).

You must add to cart and insert the coupon "DEALS" to get $44.73.

Product details from manufacturer: http://flashlight.nitecore.com/product/ea41

Enjoy!

Related Stores

FastTech
FastTech

closed Comments

  • -6

    1000 lumens from 3W for 400 Hours? Bullsheizer.

    • +5

      400 Hours is usage time based on the lowest mode of 1 Lumen.

      • +2

        Yes, but the specs linked at fasttech do not say that.
        3W from a set of AAs is believable, but the 1020 lumens is the max rating of the emitter in lab conditions, with a 3A supply and ideal heatsink.
        This torch cannot possibly do that. All they did was lift the number from the Cree spec sheet.

        A cool white T6 bin at 1A is rated at 385 lumens. Less optical losses, less as it warms up. Might get 300 in a test if lucky.

        http://www.cree.com/~/media/Files/Cree/LED-Components-and-Mo…

        • p.s. 300 lumens is still a good number. A good honest number :)
          Its a great torch if you prefer to use AAs.

        • @manic: So, this is 300 lumens in real life with 2AA batteries?

        • It's being driven a lot harder than 1A in turbo mode. You would easily see 800-900 lumens out of the front of this. Although what it doesn't state is how ANSI/NEMA FL-1 standards work to describe the max output. The max measurement is taken after 30seconds turn on and is generally pretty accurate. Due to thermal issues however turbo mode will drop to high mode after a predetermined time.
          Even in high mode this should be stably outputting in the ballpark of 400-500lumens pretty easily. SO stating it might get 300 in a test if lucky is pretty inaccurate.

        • @stargalaxy:
          Not likely :) It takes 4xAA, so with NiMH the 1A at emitter should be sustainable.

          Ampersand: the 300 lumen estimate is based on the 1000mA /3W specs on the OP's linked page.
          As you say, higher power is possible, but will run into thermal and battery limits.

        • +1

          @manic:
          I'm pretty sure its just an inaccurate description at fasttech (the 1020 lumen version would be an XM-L2 U2 anyway). It really shouldn't run into battery limits with a decent set of NIMH.
          Pretty certain these are 4S cell setup 4S eneloops would easily maintain a 2-3A draw.
          I'd say it should easily give 400-500 lumens of regulated output in "high mode" for anywhere between 1hr30min - 2hrs, which is quite decent!

        • @AmperSand:

          4S eneloops would easily maintain a 2-3A draw.

          Wow, just googled it and you are right. I normally use Li-Ion, and the NiMH I tested could not maintain 2-3A.
          I did try some Eneloops, but I guess they were a bit old (or fake??).

  • +2

    This coupon works on many more torches (see comments)
    https://www.ozbargain.com.au/node/244690

    • Yep. Bought the MH20 thanks to your comment from that post. I think that could have been a post on its own. Credit to you noob

  • -4

    must be chinese lumen

  • When run on highest power, are these the ones that become too hot to hold after a couple of mins?

    • Heat in the head and body is a good sign. Heat in your hand means heat is being wicked away from the LED, which is critical. The head and body of the light are designed to heat up, the fins dissipate said heat, as well as your hands absorb it. Sadly see below, these have a flawed design if you want them built right.

      Much thought and design goes into wicking heat from the led to the head and air. Its a significant part of torch (and LED in general) design.

  • +1

    D40A is a superior unit. Forget the peak numbers, the D40A will still be pumping out max lumens, and high lumens long after the poorly heat managed EA has ramped down current to protect the led. Dont get me wrong, its going to be bright, but not as bright as the D40 for as long.

    200 lumens is much brighter than most people think, and you will never tell the difference visually between a 200 and a 150 lumen light. More so for 900 and 1000.

    • Where to get D40A bargain?

      • Already linked above in comments. But here ya go https://www.ozbargain.com.au/node/244690

        Was posted up the other day. Its the same code and seller, seems to work on many products.

        • I can't get the code to work with D40A. It works with EA41, so I think I'm entering the code properly.

    • D40a isn't necessarily superior. The lowest output of 30lm means you won't be using it indoors in pitch black too much. The 1lm on the EA41 is far more versatile for camping and late night bathroom breaks.

      • D40A Has a moonlight mode as well. From memory it's 1lm.

        I don't own the EA41, so I can't say how it compares to the D40A, but the D40A is fantastic.

        • I stand corrected. They don't mention it in their official specs but the selfbuilt review states otherwise. On top of that he actually tested it at .43lm which is ideal. In that case my vote goes to the D40a

        • @ebosh: can confirm, hold in power for 2 or so secs on D40A = moonlight. I swapped to a 4000k XM-L2 on copper with mine, cant find another 4AA i like better. Only gripe on the D40A compared to the rest is the battery carrier not being integrated like the others.

        • @AmperSand: I'm not sure why they don't advertise the moonlight mode. I've moved on from my EA4 (and most AA lights), but if I had have known about the D40a I might have grabbed one back in the day. I'm saving my pennies for either a SC63W, and I'm talking to one of the manufacturers at the moment about a custom build but the minimum number is 200 and I'm not sure if people will have the appetite for a $30-$40ish light that isn't a name brand.

  • +1

    fasttech, slowpost

  • You're going to need a good charger to go along with the eneloops if you plan on using this on high too much. This thing smashes through batteries. Also if you aren't using it for a while make sure you lockout the tail by unscrewing it otherwise the electronic switch will drain the batteries

    For what it's worth, the code works on the Armytek stuff as well

  • I'd go for the EA45S instead.

  • Guys…I might have to settle for this one since I cannot get the discount on the Sunwayman D40A (the DEALS code doesn't work).

    I like the Sunwayman more because my NiteCore EA4's button ballooned and the Sunwayman is listed as White Light..

    Is the EA41 Cool White or Warm White?

    Help appreciated.

    • There is a EA41W for the same price, check it out on FastTech.

    • Don't feel bad. I have the EA4 , the EA41 , and the Sunwayman and I prefer the build of the EA41. Looking at the box it doesn't indicate whether warm or white light but outside at night I really cant tell any difference in light

  • Is there something special about the coupon code ?
    The price doesn`t change when I add it or does it show up later at the checkout.

  • +1

    impulse purchased the EA41w :s

Login or Join to leave a comment