This was posted 9 years 3 months 30 days ago, and might be an out-dated deal.

Related
  • expired

LED LCD TV Bracket - Fits up to 65 Inches - FOR BRICK WALL ONLY $40 Delivered @ Big Aussie Deals

111
LED

Sales will stay up until the until sold out.

****SUITABLE FOR BRICK OR CONCRETE WALLS ONLY****

http://www.bigaussiedeals.com.au/led-lcd-tv-bracket-flat-wal…

COUPON CODE: LED

If you have any question please contact us on below information:
Email: [email protected]
PH: 0404 945 982

Universal LED/Plasma/LCD TV Bracket Wall Mounts
A TV bracket is one of the best ways to place your television at an angle so that everyone can enjoy watching it. Whether you put it in the family room, living room, or bedroom, a TV bracket can let you add a bigger television without compromising space and without imposing on the decor of your home. TV brackets keep your high definition television firmly and safely attached to your wall or ceiling, freeing up much-needed space in your home. Unlike using a stand or a table for your television, a TV bracket can add a new decor to your bare walls without cluttering up the room.

This TV bracket is
Compatible with all manufacturers including Pioneer, Panasonic, Samsung, Sharp, Sony, Philips, Hitachi, Toshiba, LG and many more!

Content:

TV Bracket
6 x Bolts
6 x Wall Plugs
4 x Rubber Washers
12 x Assorted screws
22 x Washers
1 x Spirit Level

Specifications:
- Forwards Tilt: 0 to 12 degrees
- Horizontal Pivot/Swivel: -45 to +45 degrees
- Distance from wall: 73mm to 473mm
- Suits wall stud spacing up to: 345mm
- Maximum weight capacity: 80kg
- Wallplate dimensions (WxH): 345mm x 175mm
- Total width of bracket: 800mm
- Total height of bracket: 480mm
- Maximum mounting hole spacing (horizontal): 768mm
- Maximum mounting hole spacing (vertical): 455mm

Check our full range of products @ www.bigaussiedeals.com.au

Related Stores

Big Aussie Deals
Big Aussie Deals

closed Comments

  • So if I want two, I have to do two separate orders? I note the discount applies to one only

    • +1

      Hi There,

      Sorry for that mistake, i fixed the coupon code and it's working for quantities more than 1.

      Please test again and let me know if you have any further questions.

      Regards
      Harry

  • Content : spirit level.
    That's considerate!

    • I like to think that spirits are pretty content.

  • Cheers, bought 2

  • -4

    Misleading description. You say this fits stud walls up to 600mm?? How can it do that when the wall plate size is only 345mm wide. A mount bracket this size must span at least 2 studs. Standard stud walls are typically 450 to 600mm spacing.. This mount is useless unless you have brick/concrete walls.

    • +2

      That's the bit the TV sits on… If you read the description it's 800mm wide. Good job negging because you can't read.

      • +2

        Good job negging because you can't read.

        LOL.

      • +3

        Pailiau is correct.
        Look at the pic with the measurements.
        The wall plate is only 345mm wide.
        The bracket facing/holding the TV is 800mm.
        This bracket will not cover two studs.
        If the measurements are correct, this bracket should be avoided.

        • +1

          Wow Yeah. I'm going to eat my words. Looked at the picture and holy sh!t, that's a really bad design.

          My apologies to Pailiau - I am the fool who assumed a bracket would be safe.

    • +1

      Agree with pauliau. From the photos and the description, the part that attaches to the wall is 345x175mm. The part that attaches to the TV are the 2 vertical brackets that have the tilt adjustment on them. These 2 brackets then hook onto the plate that are 800mm wide.

      So if you want to fit the bracket to a gyprock wall with 600mm studs, then you will have to do away with the pivoting arms and just mount the 800mm wide bracket directly to the wall.

      • OP can u confirm?

  • Good deal…bought one thanks

  • Op can you please advise whether this model is the lowest profile full movement model or if you provide one that is even lower. want it to sit as close to the wall when not extended or closed as possible. cheers

    • Hi There,

      That's the only model we're selling at the moment, the closest to wall is 73mm

      Regards
      Harry

  • Sweet as, ordered 2. Thank you.

  • Be careful guys. Normal wall studs 600mm apart . The diagram shows 345mm backplate so some wont be able to fix between studs which means you will need to create own backplate. The Up to 600mm stud in this original post is incorrect.

    • If that's the case I'm asking for a refund.

  • hi OP, may I ask what's the difference between this one vs. ebay $30's one?

  • I got burnt on these.. it should have been made clear that these will not suit a gyprock wall. It looks like I am going to have to mount a piece of 3/4" ply on the wall to fix the stupid bracket to. not happy.

    • I got a refund from them after I emailed them to confirm OzBargains facts. Nice guy and refunded no dramas.

Login or Join to leave a comment