renza » user profile

Member Since 25/04/2012
Last Seen 1 hour 1 min
Badges 1 2

Recent Activities

Show them this and give it a shot: https://imgur.com/O7DwDoc
16/02/2025 - 22:46
damn seems like out of stock :( hope they restock the online store before the special ends
14/02/2025 - 22:59
CASHREWARDS code is auto applied, will this block the tracking?
12/02/2025 - 17:47
Looks the same as the aldi one but in a different colour!
08/02/2025 - 00:58
Yep https://github.com/ginkage/MHI-AC-Ctrl-ESPHome 100% integration in home assistant
06/02/2025 - 23:41
m2 air can only drive a single external monitor, unless your dock is a displaylink dock
05/02/2025 - 12:27
Sorry yes I meant this. I should have been more specific
04/02/2025 - 00:32
An Apple Silicon mac is not required, a 2018+ Intel mac will also work fine.
03/02/2025 - 22:59
Is this better than my Airport Express from 2012?
03/02/2025 - 12:06
It's not a fork. Much of the Synology interface is closed source, so there isn't anything even public to create a fork from. Xpenology is…
28/01/2025 - 01:48
> it’s an open-source version of Synology No it's not, it's just stealing Synology's software and running it with a custom bootloader.
27/01/2025 - 23:56
is it proper usb-c or will you need to charge with a usb-A to C cable like some cheaper devices?
20/01/2025 - 11:50
Here is my esphome config: https://gist.github.com/renkoh/45790d4a4d954c344084b0d5f86c07a8 You need to use Itchiptool and a UART to usb…
12/01/2025 - 20:24
Here is my esphome config: https://gist.github.com/renkoh/45790d4a4d954c344084b0d5f86c07a8 You need to use Itchiptool and a UART to usb…
12/01/2025 - 20:24
Got mine flashed with esphome and into home assistant
10/01/2025 - 11:44
I've owned my Silvia v1 for 21 years now, build date 2003. Spent the first 14 years of its life in Adelaide with super hard water, and the…
03/01/2025 - 01:17
https://github.com/ginkage/MHI-AC-Ctrl-ESPHome I put these on all my MHI splits, cost less than $10 each to make and makes it home…
03/01/2025 - 00:56
This is not true! a box or container is definitely not required! https://www.youtube.com/watch?v=FNdkTWiXaQM
01/01/2025 - 12:49
Still waiting for my order from late november, i have been told to wait cos aus post is slower than usual this time of year but 4 weeks is…
30/12/2024 - 00:22
Not always true, depends on the vulnerability as to if it can be exploited from the outside
24/12/2024 - 12:55
Batteries can be checked in if they are part of a device.…
09/12/2024 - 12:27
renza was awarded a badge.
30/11/2024 - 21:54
It's because NBN removed the CVC charges for plans 100mbps+, so the 100% on the graph is probably the capacity of the NNI, not CVC (likely…
18/11/2024 - 02:25
But calibration data is almost always non linear, let alone a fixed offset.
03/11/2024 - 19:02
Any delayed shipping available?
20/10/2024 - 15:54
The powder has changed in recent months, it now leaves a white residue on plastics in my dishwasher. Has been confirmed on the Aldi lovers…
21/09/2024 - 00:50
Weird, mines similar, usually press once, wait a couple secs and then press it again. I tried it on some floor stock and it was the same…
15/09/2024 - 17:02
You can replace the wifi module with an esp8266 running esphome. I have them in all my MHI splits and then in home assistant/apple home.…
13/09/2024 - 08:43
Costco deals are here too, what’s the issue?
21/07/2024 - 20:39
Loading...