wwwsam » user profile

The rough weights are on the website. 2Ah: 0.4kg (2.5Ah should be roughly same) 4Ah: 0.65kg

My guess is also 21700s since they already use them in the larger batteries (ie. 8Ah) There's 21700 cells that are above 5Ah so 4Ah cells…

If you're handy with 3d printer and some soldering, it's pretty easy to make an ozito to lighter socket. You can use any usb lighter…

Was interested until I saw 5V2A on both ports.

Bega and Bega Simply Nuts are different. To me the Bega Simply Nuts tastes close to the old Mayvers (but not quite). Yet to find something…

Pretty good, but it varies with the battery charge/voltage. With the XTAR lithium AAs it can literally cut your gum if you have it at 2 and…

I've had bad experience with Waterpik's internal battery ones. They may suddenly stop charging for whatever reason. Mine died a bit over a…

My favourite is the Ulanzi F38 v2. It fits the wide straps of some of my bags and I find the F38 system more budget friendly and overall…

Depends how much you shoot and if you need to use the wireless features (ie. GPS via BT etc.) At bare minimum you should get a spare.…

Weight and size should be smaller. The R8 is more comparable to the 200D.

In that case sounds like yours might be DOA unfortunately.

Mine had a tab between the battery and the contact, so it wouldn't have been powered regardless of switch position.

Just tested, everything works fine on stock batteries. If you want to remap the keys in Windows, "Logi Options+" software works. The older…

Received in Sydney yesterday. Included batteries had piece of paper to stop from conducting and worked fine for me (keyboard lit up, didn't…

Thats mouse only. The keebs are 100+ in that link.

No I have them both the same way, and facing to the side of the inverter.

Thanks. I needed a bolt dongle.

Not sure if I still have them, but I designed it in such a way that the 2 Ozito batteries sit perpendicular to the Ryobi 36V slot.…

If you're handy with the 3d printer and soldering it's not too difficult to make an adapter for Ozito batteries. I've been running the 36v…

Not quite. It's a lot more complicated then that and not very clear. Correct me if I'm wrong, if you're just using it for low wattage ~3A…

Yes they'll probably be better then the ikea laddas as these give out a constant 1.5v until they're flat. Ikea (and other rechargeable…

Haven't looked at brands (or chargers in general) in a while, but XTAR should still be a decent brand. There's cheaper brands that…

It depends what you intend to charge or do with it. AA/AAAs it should be ok. But if you intend to charge large lithium cells, it'll be too…

The Xtar LC4 charger only does 1.5V lithium AA/AAAs. Alternatively, the L4 does the 1.5V lithium AA/AAAs and also the typical 1.2V…

Yes there is one usually stuffed into the top. Because of this, they usually aren't advisable for sensitive electronics as the power coming…

Yes it should do great paired up with something like the 100mm macro*. At least much better then the iPhone that everyone is comparing it…

It has the potential to easily surpass, but with a lot more time, effort and potentially money. Some people enjoy the process, most…

Not sure about now, but their original target market was for people with a more active lifestyle where the sodium is justified. ie.…

If you're just moving that (from memory) black vertical free standing box, either buy a pre-terminated coaxial cable that's long enough for…

It's for making custom Ethernet cables. If that's what you need to move your NBN router, then yes. Otherwise no.