jeeg » user profile

Member Since 07/05/2011
Last Seen 3 hours 3 min
Badges 2
Location Perth

Recent Activities

I just returned an ugreen power delivery dock to amazon as its usb-c connector is always playing up whem connected to my ipad or notebook.…
29/06/2024 - 09:59
My main pc has a gpu already, would it be feasible to add this 550 to pass through to a windows VM? The main os is linux.
27/06/2024 - 09:13
thanks mate. I think i will hold out a bit longer for the 4th gen.
25/06/2024 - 21:42
so no particular benefit between 3rd gen and 1st gen 4k TV?
25/06/2024 - 20:52
I have the Apple TV 4k - from the about menu it says A1842 64GB. Is this a worthwhile upgrade?
25/06/2024 - 19:50
what i meant to ask is the new PARASOLL and VALLHORN sensors - I cant see these on the website yet....
20/06/2024 - 19:54
When will the new versions be available? Can't seem them on ikea website yet....
20/06/2024 - 17:48
So the ipad air m2 cannot hook up to an external monitor for extended screen? Got abit confused.
15/06/2024 - 13:11
Thanks mate. I will check out the WD22.
15/06/2024 - 09:18
Thanks again. Are you using the 38" at 30hz? Also the D6000 is rated 65W...would you reckon i should get a dock that is higher rated to be…
14/06/2024 - 21:25
Thanks bro. Could you please share the model of that Lenovo dock?
14/06/2024 - 20:03
Thanks bro. I check that the D6000 can do a single 4k at 30hz and 2 monitors at FHD. Do you know if you can use 3 x monitors concurrently…
14/06/2024 - 20:02
yes ok. if the ipad is not part of the equation - what would be a recommended docking station?
13/06/2024 - 23:26
Hi guys, I am hoping to get some recommendations on a suitable dock for the following setup: 1) a Lenovo T14s with its screen working…
13/06/2024 - 23:18
Good thinking. The only reason i haven't sprung for this deal is we are running out of space in our small house. Have to get a bigger house.
09/06/2024 - 13:25
Was thinking the same thing. Seems perfect for 3d printers and the bottom shelves perfect for filament storage
09/06/2024 - 13:12
Thanks bro. From the pic it doesnt look like I can reduce anything there. What about the top of the machine - anything that can be done to…
08/06/2024 - 15:12
Hi bro would u be able to post a photo? I m hoping i can somehow modify this to fit my kitchen bench
08/06/2024 - 12:04
Thanks bro. If we put the difference of $20 aside any cons ordering from bambu labs itself?
07/06/2024 - 21:34
Very keen on the P1S with AMS. Getting a bit confused - it is better to order from Amazon or order from Bambu labs itself?
07/06/2024 - 21:10
looks like your house and my house were all - non compliant - speaking in the same tone as our friend in Site Inspections.
07/06/2024 - 00:12
your bench top clearance is similar with mine - around 830mm. We are both missing out.
06/06/2024 - 23:07
old enough i guess. the maximum clearance below the bench top to the floor is only 830mm :-(
06/06/2024 - 23:05
I was really keen but just checked that the height clearance of my countertop to the floor is not sufficient to fit the dishwasher in. 😭
06/06/2024 - 22:19
Loading...