luigough » user profile

Member Since 27/08/2024
Last Seen Hidden

Recent Activities

I wish I had that kind of money to splash ... no. Just one for now. A lot less storage, but it's still a useful amount for me. I've already…
26/01/2025 - 22:05
Interesting to cross-paths with those who have visited my site for other reasons. Hello! *waves frantically* On the upside, I've replaced…
26/01/2025 - 20:47
In case anyone's interested in how well this unit works, some of its gripes and what's inside ... well, I bought one, tested it, wrote a…
26/01/2025 - 16:49
Mine was on a 12V "nominal" solar setup via Anderson, because of the 10A cap, even on the best of days it wasn't passing ~180W charging but…
26/01/2025 - 11:02
They would only offer a refund, so I took it rather than bother messing around with salvaging the battery, verifying what still works, etc.
26/01/2025 - 00:07
What a coincidence ... my Yard Force also died after a month of service ...…
25/01/2025 - 23:21
I have a Tamron 17-50 f/2.8 and a Tokina 11-16 f/2.8 which I use infrequently. The former seems to have issues with AF hunting ... but that…
21/01/2025 - 09:47
Just beware - has a habit of overheating when doing 4k video ... about 20 minutes is all you'll be able to squeeze. Can do 1080p…
21/01/2025 - 09:39
I tried one of these myself, thanks to winning one - https://goughlui.com/2024/09/29/review-jbl-clip-5-portable-bluetooth-v5-3-speaker/…
08/01/2025 - 19:23
Just a quick PSA for all who purchased Katana tools - To get your 5-year warranty, you *must* register your tool within 30 days, otherwise…
02/01/2025 - 12:45
Just a quick PSA for all who purchased Katana tools - To get your 5-year warranty, you *must* register your tool within 30 days, otherwise…
02/01/2025 - 12:45
Just a quick PSA for all who purchased Katana tools - To get your 5-year warranty, you *must* register your tool within 30 days, otherwise…
02/01/2025 - 12:45
Um. Well, I have been lurking a lot and decided to make a few replies here and there in the spirit of giving back :) The OzB habit has both…
29/12/2024 - 15:35
Yes, there's a PCB with a chip that handles both the charging and buck-converting during discharge. If you want to see how it works, I tore…
29/12/2024 - 09:45
XTAR do put out an AAA version - I've just never seen it available anywhere though ...…
28/12/2024 - 22:24
The D4 doesn't explicitly state support for 1.5V Li-Ion batteries, so I'm going to have to say no, they're not really compatible. While…
28/12/2024 - 18:34
As far as I know, the VC4 doesn't do 1.5V AA Lithium-Ion cells, so you'd be using 1.2V Ni-MH only with this one.
28/12/2024 - 16:03
I've personally tried the XTAR VX4 and find it quite decent ...…
28/12/2024 - 15:58
You need to use a 1.5v lithium-ion specific or capable charger as that applies 5V at up to 500mA to the terminals for charging. I don't…
28/12/2024 - 15:40
I have also tested the XTAR 1.5v Li-Ion cells and they performed very well, although in that test, I had an L4 charger that does both Ni-MH…
28/12/2024 - 15:29
I'm not so sure. Looking at the thicker profile rails of the Rockwell battery and a few keying "bumps" in front of the contact receptacles,…
28/12/2024 - 11:37
In case you're interested, I bought into the last 50% off deal and took a good look at the batteries, determining the original OEM in the…
26/12/2024 - 12:36
Long time lurker, first time commenter - but hey, I snagged one and did a partial teardown and tests on my unit:…
24/12/2024 - 23:06
luigough joined OzBargain.
Welcome aboard!
27/08/2024 - 06:44