Pirateguybrush » user profile

Member Since 05/07/2017
Last Seen 05/10/2024
Badges 1
Location Perth

Recent Activities

Runs great on deck with ScummVM
07/07/2024 - 16:02
I've only started down the rabbithole of learning about security cameras, but the forums on https://ipcamtalk.com/ are a fantastic place to…
05/04/2024 - 23:48
The sensor to MP ratio is much more important than MP alone when it comes to security cameras. Don't be fooled into thinking an 8MP is…
05/04/2024 - 01:35
Propaganda is not a bargain
09/02/2024 - 20:10
Innaloo say they have 4 in stock, but staff can't find them.
02/02/2024 - 20:46
It's available on the high seas
02/02/2024 - 18:59
I've recently tried the Deebot X1 Turbo (very similar to the Omni), and the Roborock S7 MaxV Ultra. I found the Deebot's mapping to be very…
28/08/2023 - 03:25
1:6 dilution, as per this chart. Someone reviewed the active ingreedients of a whole lot of different options to determine which ones were…
22/08/2023 - 11:34
I've owned one for a few months. I'm using this stuff in it and the water tank smells fine. I've owned several robovacs/mops over the…
21/08/2023 - 21:22
I have this running constantly on my machine. It has alerted me to smart errors on several drives, giving me sufficient warning to replace…
18/08/2023 - 14:33
Reports on the home assistant forums indicate it works. I haven't tried it myself.
17/08/2023 - 01:41
Any reason to get the Meross over this one, for use via Home Assistant? https://www.athom.tech/blank-1/garage-door-opener-for-esphome
14/08/2023 - 23:45
No, sorry. The chip is a TYWE2S, but you won't be able to flash it without removing it - My theory is there's a secondary chip attached…
14/08/2023 - 00:14
I imagine that would work, but I don't have the soldering skills to remove/reattach it. If you've got any good suggestions as to how I…
11/08/2023 - 18:51
Tasmota allows for local control (aka home assistant). If you don't know what this means, it's not something you should try.
11/08/2023 - 00:12
I tried it. Opening it is a nightmare, and I couldn't get the flash to work.
11/08/2023 - 00:11
Requires soldering. It's difficult, I couldn't make it work.
11/08/2023 - 00:11
It's very difficult to pull apart, and once I got inside I was unable to flash over serial (despite the chip being apparently flashable).
11/08/2023 - 00:10
I've set up an automated $1000 monthly deposit into my ING account. Three days later, it transfers $995 back to my main (non ING) account,…
17/07/2023 - 18:51
As long as you have an M.2 slot available, it should be compatible. The newer generations of drives are faster if the slot is capable of…
11/07/2023 - 03:00
Personally my partner and I found the Koala too firm even with their free topper, and ended up making a return. However in the 2 months we…
09/07/2023 - 11:13
I can vouch for this. Personally my partner and I found the mattress too firm even with their free topper, and ended up making a return.…
09/07/2023 - 11:09
For anyone interested in flashing these with tasmota/esphome for use in home assistant, it appears to be possible for both units.…
29/06/2023 - 18:54
Cool, in that case I'd look into Ticket to Ride, Wingspan, and maybe Terraforming Mars if you want something a little more involved.
25/06/2023 - 16:01
If you want useful answers on this, you'll need to be a bit more specific in what you're interested in. Do you want something you can play…
25/06/2023 - 15:07
Loading...