Fullhalter » user profile

> Knives are one of the most important tools in the kitchen as it either makes or breaks a dish. Intro to a $27 knife set

> The Shun looks like it would sort of mitigate some of these issues Not this one, but a shun classic or anything with more curved edge…

I've got a larger Kenwood food processor, the throat is too small for even a medium sized potato. Plus three different thicknesses on the…

Benriner owner here ... While the blade is easily removable, properly re-sharpening it might be too involved for most. Unless you're…

Nice score. Where did your mate source the dw5000r? I've got gw5000 and gwm5610 already, I think it'd be nice inbetween

Came across the brand in this [video](https://youtu.be/3_FLnD7Exio) ... I'm impressed

Best feature: Included long shank bits Con: Nonmagnetised chuck, unlike the manual version

> My watches have 2 years warranty, so I need to make sure people use the watch properly. Then you should've spec'd NH38 in the first…

USB power input via decoy. Vapcell official sell those but exy. Instead, search for "QC/PD 2.0 3.0 Type-C to DC Fast Charge Decoy Trigger",…

What's the point of such experiment? Prolonged exposure to water alone....

Fair question. Here's from the edge' perspective: https://www.reddit.com/r/chefknives/comments/tvyrpt/the_risk_of_dishwashing_knives/ >…

Not at all. Because it's pointless. A knife this level won't retain a *very* sharp edge beyond a single prep*. However, it will retain…

Shapton pro #1000, Jon from JKI vids on YT

If you rock chop the fibrox would suit better. However, generally speaking Japanese knives cut with a lot less effort with push/pull cut…

Afaik made in only make 10 or 12 stainless, but it's been a while since I bought mine. *from the official site

The absolute flat part is less than quoted. It's only about 19cm from the quoted 21cm on my ten inch pan. I'm on induction as well. Can…

The knife "experts" love to hate and some cooks love to bits (the G-2 was late Anthony Bourdain's favourite knife). I've got one and still…

Ygwypf. Seki stuff are bottom feed tools and appropriately priced so. Oh and avoid "burrfection"

Apparently it's called PILOT [lightive](https://www.pilot.co.jp/products/pen/fountain/fountain/lightive/) at home. "Light and active, ima…

I bought the 9" for kicks. Super front heavy and hard to pinch grip due to the sharp choil and spine. Three finger grip didn't help, it's…

I actually prefer DD on the peripheral, like at three in a traditional dial

Battery pull did nothing on my RGB30 with rocknix. Not sure why they couldn't fix what jelos got right in the first place.

Same, that's why I went TS101

HS01 use T12 tips. Every tip shape imaginable. By convention, chisel tips start with D, e.g D2.4 would be 2.4mm wide.

The Global petty has a notch and curved so it's easier on board. This and the Takamura otoh are similar, short heel, *slim* handle, which…

I never said $200 was entry level. Hard starting is not OK on any level. Good luck to batteriesnotincluded, hope you get your pen fixed...…

Skills or comfort levels notwithstanding, a hard starting pen is unacceptable no matter the cost let alone a $200 one. It's gotta be fixed…

Possibilities: 1. Dry nib/feed assembly or a piston seal issue, let's hope not. Write a sentence, cling wrap, a rubber band, if it…

Sorry to hear. How did that happen? The barrel and cap are platinum plated stainless steel, there shouldn't even be galvanic corrosion.…

Only the nib... but LAMY Studio Pt is platinum plated from head to toe. It's by far my shiniest fountain pen