Noctua NF-A20 PWM PC Fan A$39.59 + A$9 Delivery @ Noctua Cooling Solutions via Newegg

270

Priced about $75 at the usual local retailers. Sold by the official Noctua manufacturer store on Newegg. Large and thick 200 mm PC fan, nice and quiet.

Can't see end sale date, but a current sale is ending in 18 hours.

200x200x30 mm, 12V, 4-pin PWM, max. 800 RPM, max. 18.1 dB(A), >150,000 h MTTF

Large 200mm diameter for high airflow performance at extremely low noise levels, three sets of mounting holes (154x154, 170x170 & 110x180mm)

Includes anti-vibration mounts, fan screws, Low-Noise Adaptor, extension cable and y-cable for running two PWM fans on the same header

Related Stores

Newegg
Newegg

Comments

  • Any other good noctua fans on sale thats worth buying? Need 2x 140mm and 1x 120mm for my case.
    I know noctua is famous and expensive but not sure which models are the good ones to buy without spending a ridiculous amount.

    • +1

      The redux series is pretty good, and what I use in most of my builds for case fans, and they are at half decent prices atm on newegg, even with shipping (providing you buy 3, it works out to only $3 per fan for shipping),

      Noctua NF-P12 redux-1300 PWM, Quiet Fan, 4-Pin, 1300 RPM (120mm, Grey),
      https://www.newegg.com/global/au-en/noctua-nf-p12-redux-1300…

      Noctua NF-P14s redux-1200 PWM, Quiet Fan, 4-Pin, 1200 RPM (140mm, Grey),
      https://www.newegg.com/global/au-en/noctua-nf-p14s-redux-120…

      1 of the 12cm, and 2 of the 14cm fans is $70 inc shipping, which is actually pretty good value.

      • +2

        Note, most motherboards are all using 4 pins for system fans. But if your board is low end, double check to make sure it's not using some 3 pin fans, as you will need different variations on the above fans I've recommended.

        • Wouldn't these still work the same way? They can still be controlled by voltage with pin 3

          • @greatlamp: They would run at full speed

            • +2

              @DeToxin: Its the other way around.
              4 pin fan can be controlled by voltage or PWM.
              3 pin fan can only be controlled by voltage.

              4 pin header supplies constant 12V (ie max voltage) and a PWM signal to control the speed.
              3 pin header supplies variable voltage (i think ~6V to 12V) to control the speed.

              So a 4 pin fan would work exactly the same as a 3 pin fan when plugged into a 3 pin header since it will slow down at lower voltage.
              But a 3 pin fan plugged into a 4 pin header would run at full speed since its getting constant 12V and ignoring the PWM signal.

              Therefore I dont think theres really any benefit to buying a 3 pin fan.

              Also worth noting that for 4 pin headers, you should be able to set them to voltage control in bios (effectively turning them into a 3 pin header)

    • +1

      https://hwbusters.com/best_picks/best-case-heatsink-radiator…

      Arctic Max fans are decent and are much cheaper than Noctuas

    • +12

      I'd like to hear what that sounds like.

      • -3

        And use a variable speed controller.

    • +1

      Big waste of time to end up with an inferior fan

      • Yep, while expensive, Noctua put a ton of work into the tolerances and materials.

        Printing a replacement fan for the Noctua hub is like your mum saying 'we've got Noctua at home'. Just buy a different fan if this isn't your thing.

  • +8

    Does anyone else remember from early 2010s when noctua was the same price as other fan brands and was just considered better because it was a little quieter

    • +3

      no..
      they had super expensive CPU coolers back then, well, compared to others at the time,
      but it was so worth it

    • +2

      They are still very good, but pricey and the competition has caught up. Not made in Austria anymore, but made in China. You can find the same fans on AliExpress, just without the Noctua brand and a little cheaper.

      • +1

        Have you ordered these AliExpress fans? I would be willing to bet that are actually not the same at all

        • +1

          I bought one such from Aliexpress, it's been running 24/7 for five years right out in the open in the living room and it's inaudible (to me at least). I doubt it is "exactly the same" but it's powerful and silent and it hasn't died yet

      • they actual Noctua fans without branding or clones of a lesser quality?
        Any links you can share?

        • Noctua fans are made by Yen Sun Technology aka Y.S. Tech.

          • @RedHab: any links on Aliexpress? cant find anything…

            • @vongz: I'm curious too….I would like to try them out for science!

              • @Barple: As an alternative. I am waiting for the Arctic P12/P14 Pro that should be announced to match the new AIO

  • For anyone complaining about the price of Noctua fans - the amount of engineering and design that goes into their fans is insane. GamersNexus on youtube did a really interesting series on them recently, worth a watch.
    If they weren't the worst colour scheme possible, I would be happy to pay Noctua's prices.

    • +1

      I find their dedication to the desaturated famicom colors kind of endearing tbh. But yeah it matches with nothing

    • I think it's their marketing budget that's insane.

      Major Hardware did a video on one of their most popular fans, showing how it's just a ripoff of a thermaltake design
      https://www.youtube.com/watch?v=FT-MrSvXrOA

      • +1

        I still remember some fans from thermaltake that were more expensive at the time (2012) and considered better. It’s funny how the public preference subverted.

  • -1

    Priced about $75 at the usual local retailers

    Lol. It's been about 10 years since Noctua had the cfm/pressure to noise level crown. People are just paying for a meme at this point.

  • The Silverstone ap181 series (ap181/182/183/184) is smaller, quieter and pushes more air according to a bunch of reviews when the nfa20 came out. So consider that as an alternative.

Login or Join to leave a comment