• expired

$10 for Sunlu Recycled PLA Black 1kg + $10 Delivery ($0 MEL C&C/ $150 Order) @ 3D Printer Gear

120
$10 for Sunlu Recycled PLA Black 1kg + $10 Delivery ($0 MEL C&C/ $150 Order) @ 3D Printer Gear
Go to Deal
Associatedkad3d on 18/12/2024 - 18:44 3dprintergear.com.au (457 clicks)
Last edited 18/12/2024 - 21:01 by 1 other user

Sunlu Recycled PLA 1kg Black is discounted to $10 at 3D Printer Gear for their 24 hour flash sale.

Ends midday Thursday 19th December 2025 12pm 19 Dec 2024

Electrical & Electronics 3D Printer Filament

Related Stores

3D Printer Gear
3D Printer Gear

Comments

  • impoze on 18/12/2024 - 18:50

    What about delivery

    • bio on 18/12/2024 - 18:59

      $10 to NSW 2000.

      • impoze on 18/12/2024 - 18:59

        It's added now after i reported

  • tuim83 on 18/12/2024 - 19:03

    Maximum order quantity is 4.
    $10 shipping to Victoria
    Thanks

  • Associatedkad3d @ 3D Printer Gear on 18/12/2024 - 19:03

    There's also free pickup in store

  • b-radicool on 18/12/2024 - 19:05
    +2

    Webpage says PLA, not PLA+

  • 777 on 18/12/2024 - 19:05

    Bought 4, pick up.. just in next suburb for me. Thank op, good for prototyping

  • Bruceflix on 18/12/2024 - 19:06
    +3

    When the $10 flat-rate shipping says:

    • Free Delivery in 2-7 Business Days.

    Very much confused as IMHO Free does not cost $10

  • anthman on 18/12/2024 - 19:11
    +9

    Max of 4 makes it $12.50/kg. Jayo deals on eBay at 10x rolls for basic PLA comes very close to this price per KG and you get access to a variety of colours. No deal.

    • cheepo on 18/12/2024 - 20:29

      I agree but are there any current deals for those needing filament now?

  • Leho on 18/12/2024 - 19:45

    sunlu pla isnt great :(

    • Jimothy Wongingtons on 18/12/2024 - 20:19

      Compared to…?

      • Leho on 18/12/2024 - 20:25
        +1

        always had great results with overture (on amazon)

        never had good results with sunlu

        • Jimothy Wongingtons on 18/12/2024 - 20:30
          +1

          Interesting, have had nothing but success with the cheaper jayo sub brand. Overture does have a good reputation too

    • NigelTufnel on 18/12/2024 - 20:29
      +1

      Sunlu is perfectly fine. Never had any issues with it and I've printed probably 50+kgs of it in the past year or so.
      Just ran out of Black PLA today so perfect timing.

      • Bruceflix on 18/12/2024 - 23:11

        Perfect timing would have meant you never ran out.

        • NigelTufnel on 19/12/2024 - 07:32

          This is true. Luckily I was just prototyping, so any colour was fine to swap to.

    • mickeyjuiceman on 18/12/2024 - 20:30

      Just ran through 5kg of Sunlu matte white PLA (and the same with Jayo matte black PLA, which is rebranded Sunlu) and it's been excellent

    • impoze on 18/12/2024 - 23:02

      No issues with Sunlu and Jayo filament

  • Delilahgetsaround on 18/12/2024 - 20:00
    +1

    You'd be better off getting the Jayco/kingroon specials on eBay. Colour selection and currently eBay 20% specials it's $116petg or $107pla for 10kg with $18 postage for my location.

    • Elijha on 18/12/2024 - 20:22
      +1

      And if I don’t need 10kg?

      • Delilahgetsaround on 18/12/2024 - 20:55

        Well you aren't discarding the printer after 4kg are you?

    • BewareOfThe Dog on 18/12/2024 - 20:36

      I could have given you 8+ rolls of Kingroon. I threw them out. So many issues, with them jamming or clogging my P1S.

      They are not worth the hassle. I now only buy Siddament or CC3D from Amazon. I have no issues with Siddament, or CC3D. I order CC3D for a one off.

      • Delilahgetsaround on 18/12/2024 - 21:01
        +1

        I found my batch of kingroon to be unreal on my k1. I've only tried the PLA though. I can't imagine the quality control is as good as a more expensive brand though.

        Siddaments variety and colours look good. I'll have to give them a try, their CF selection is unreal.

      • noobshoes on 18/12/2024 - 21:11

        Any particular siddament filaments you like? I've been using PLA from sunlu and esun but live down the road and would like to support a local

        • mickyboy1 on 18/12/2024 - 21:37

          PLA silk, PETG CF or PLA CF all priced well and top notch.

        • BewareOfThe Dog on 19/12/2024 - 13:41

          I'm still getting through my kingroon excess. Ive just printed an arcade controller using their transparent green.

      • dufflover on 19/12/2024 - 10:01

        I like some of the CC3D silk colours but they are the brand I've had the most trouble with so far - they seem to easily clog where pretty much all other brands print fine with the same file. Even when hot and slowed down it's still not 100% rate.

  • mickyboy1 on 18/12/2024 - 21:36
    +2

    I won't buy the cheap stuff anymore, not worth it. Of the cheap stuff I have tried Sunlu and Jayo and got to say that the colours are not good at all. They all are muted, the whites are see through and the metallics are not metallic at all. Definitely not as good as Bambu which is expensive or Siddament, which is quality at a very good price. The PETG from Jayo also quite stringy and doesn't print well.
    My go-to is Siddament and generally the black spools are very well priced. Helps that I can pick up too so makes it convenient not having to pay for shipping.
    Siddament downside is alot of filaments sell out quickly.
    You can't really go wrong with Suds stuff, and if you have a problem he backs it up.

  • dufflover on 19/12/2024 - 10:14

    I don't really have a habit of "prototyping" even though I've got a few colours/brands of filament I could waste without feeling too bad lol. I guess it just feels pretty time inefficient esp if it's ok then got to print it again in the right colour.

    Not arguing against it or anything, just after some tips or workflow suggestions to do that more…

  • Unbreakable on 03/01/2025 - 08:11

    Tried to print with this just in the morning and after 30cm it’s already jammed!

Login or Join to leave a comment
Login Join