This was posted 12 years 2 months 11 days ago, and might be an out-dated deal.

Related
  • expired

WinX DVD Ripper Platinum 7.0 (Win/Mac) for Free - Normally $45

520
WinX DVD Ripper Platinum 7.0 (Win/Mac) for Free - Normally $45
Go to Deal
shopaholic32 on 18/11/2012 - 02:02 winxdvd.com (3295 clicks)
Last edited 20/11/2012 - 01:46 by 1 other user
AA-LERBKVJ-THANGAW

IMO quite a good software; was using the earlier version but new revamped version looks really good, supports many phones and tablets, was using earlier version v.6.9.2! I am not a software guru but you can either uninstall older version like I did and clean install this new version as it is NOT an upgrade OR just install this new V7 if you have no earlier versions installed and register the code before expiry date. I believe to be 27th Nov2012 but some below were saying for Mac Version is 30th Nov 2012.

UPDATE Amend: Been brought to my attention if you have the earlier version installed e.g. 6.9.2 Version or maybe earlier may be better maybe NOT installed this version 7Beta just yet. Wait until it is fully tested as is Beta mentioned in original post earlier. Apparently according to "vipulrm" below; version7 may not be quite as good and I may be a victim as well if that was the case …..sorry I was not aware of this and I am on holiday so cannot test or confirm. Had assumed version 7 is the latest and should be the best as per their advertisement but apparently it may not be so, so Caveat Emptor…..gee I don't know, I am not a tech Guru; all I can say is the free licensed ones ones from WinX touch wood worked for me for all my recently purchased DVD'so far up till V.6.9.2. If someone could test and advice V7, will be awesome. I am on leave on an ultrabook with no DVD ROM to test. If you never had previous version then you got nothing to lose as it is free anyway.
Sorry I am deleting some the the post to avoid unnecessary debate on being long winded ….bottom line is your choice like everything else in life. Cheers!

NOTE: I only backup movies that I own so I can use for my phones and tablets and for safe storage of my collection and convenience when traveling and I do not condone piracy as we would not have all the good movies otherwise!

Download software and register code for Windows version incl Win8: AA-LERBKVJ-THANGAW
You can thank Monkeymind if you wish for the Mac version codes and link below as I did not use the Mac version:
Download Link: http://www.macxdvd.com/download/macx-dvd-ripper-pro-2012.dmg
License Code: TX-MACXDVD-RIPPER

WinX DVD Ripper Platinum Giveaway (Thanksgiving Edition) before Nov.27
- Your ultimate solution to rip and back up DVD. Strictly personal usage.

New! Rebuilt Core. Brand-new UI. Friendlier, faster & more stable.
New! Added 300+ profiles for almost all popular tablets and mobile phones.
New! Support "merge file", "clip segments", "crop video size", etc.
New! Rip DVD to iPad Mini/4, Galaxy S3/Note, Nexus 7, WP8, Surface tab, etc.
Convert DVD to MTS/M2TS, AVI, WMV, MP4, H.264, iPad, iPhone, Android, etc.
Copy DVD to ISO image. Clone full title/main DVD content to MPEG2 file.
Computing Digiarty Software Software

Related Stores

WinX DVD, China
WinX DVD, China

closed Comments

  • ynot1985 on 18/11/2012 - 02:53

    I don't seem to able to see a MAC compatible version

  • ryang on 18/11/2012 - 03:09
    +2

    Upgrade only? So you have to have a previous version?

    • IVI on 18/11/2012 - 06:28

      It's the latest version or edition, but goes in fine as a first-install,
      provided you install it before ~ 27 or 28 Nov 2012.

  • monkymind on 18/11/2012 - 06:35
    +3
    Mac Version

    http://www.macxdvd.com/giveaway/giveaway.htm

    MacX DVD Ripper Pro Giveaway

    Download Link: http://www.macxdvd.com/download/macx-dvd-ripper-pro-2012.dmg

    License Code: TX-MACXDVD-RIPPER

    Duration: This giveaway is valid from Nov 15 to Nov 30, 2012

  • Payne on 18/11/2012 - 08:53
    +1

    For anyone that's curious about the exact version, it's 7.0.0.

    Strangely, after installing, the version actually comes up as '7.0.0 (beta)'. I'm just hoping it's a stable release.

    Edit: Although I guess we do make very cheap beta testers :)

  • dealman on 18/11/2012 - 09:32

    please edit the title for clarity, it almost felt like only the upgrade or the update was free. Thanks IVI for clarification in the comments that it's also Ok as a first install.

    It's the latest version or edition, but goes in fine as a first-install,
    provided you install it before ~ 27 or 28 Nov 2012.

    Thanks once again for posting OP !

  • matt_will_fix_it on 18/11/2012 - 09:32

    Why are there turkeys on the download webpage?

    • [Deactivated] on 18/11/2012 - 10:00

      american thanksgiving is represented with turkeys

      thanksgiving sale

  • WalterPPK on 18/11/2012 - 10:06

    I grabbed this app last time around, and it works fine.

  • chyawala on 18/11/2012 - 10:27
    +2

    Handbrake does this job and is free. Are there any comparisons to make this worthwhile?

    • The Magic Pudding on 18/11/2012 - 10:48

      I didn't think Handbrake ripped copy protected disks.

      • valtism on 19/11/2012 - 18:15
        +1

        It can.

  • firstpost bekind on 18/11/2012 - 10:30
    +3

    Four things you can be sure about in life:
    1 death
    2 taxes
    3 someone copying your 3 things post
    4 a giveaway from winx on ozbargain

    • EvilTeddy on 18/11/2012 - 10:45
      +1

      AA-LERBKVJ-THANGAW worked fine for me (it's the serial quoted here and on their website).

  • redbigot on 18/11/2012 - 10:45

    Worked fine for me, quick download and registered immediately.

  • abacus on 18/11/2012 - 11:20

    The website says 6.9.3 is the latest version

    http://www.winxdvd.com/dvd-ripper-platinum/

    Maybe this is free because it's a beta version?

    I ripped my videos with 6.3.5 and most worked fine.

  • papafox on 18/11/2012 - 12:05
    -7

    W A R N I N G

    The last version of WinDVDRipper Platinum I downloaded was flagged as a virus. After that I'm not trying it again.

    • INFIDEL on 18/11/2012 - 12:12

      A response on that link to your post in February did suggest may just be a false positive by your AV to the downloaded zip file. Would expect others to have reported issue in nearly 1 year if was a virus.

      Good enough reason to warn, but without any support for your wary AV suggestion of a possible virus, does not seem enough reason to neg.

      • mr_fjackson on 18/11/2012 - 17:49

        I don't know the neg got me to read his post. I would still download it but its nice to have a warning that gets seen, kinda like Ebay feedback.

    • shopaholic32 on 18/11/2012 - 12:31
      +1

      I doubt there is any issues as I installed mine with Norton Trust clearing it and Avast on another computer, what Anti-virus software did you use? Other's may like to confirm??

      • INFIDEL on 18/11/2012 - 12:35

        Papafox's post listed "shows up under both Comodo and Onecare"

    • Takoosh on 18/11/2012 - 12:39
      +4

      Virustotal scan results (0/44): https://www.virustotal.com/file/bb01f29ebbe1dfdbd98ca60f4fc1…

  • voltagex on 18/11/2012 - 13:15
    +2

    These guys are making money off free software without giving anything back.
    http://roundup.libav.org/issue722

  • vipulrm on 18/11/2012 - 14:29
    +2

    This version (7.0.0) is a dumbed down version of 6.9.x and is limited in the sense that it had predefined encoding profiles ONLY. I would recommend people who already have a legit (either bought or from an earlier give away) to stay away from this as you would be effectively downgrading. I burnt myself badly :(

    • vipulrm on 18/11/2012 - 21:56

      Apparently, the customisations are still there but hidden. Unnecessarily scared myself. Sorry if I caused grief to anybody who read it. Kindly ignore.

      • butasan on 19/11/2012 - 06:29

        What customisations are still hidden, how we can enable them?

        • vipulrm on 19/11/2012 - 10:10

          In v6.x.x, all the customisations (bitrate, encoding format, frame rate, etc) were all available on one screen. Now you have to select a predefined profile which brings up the titles that can be ripped. Only when you click on the setting button on each of these titles do you see these customisations.

          I think, in a way, this is good for people who do not know or can't be bothered with the details. Brings this software another step closer to "click and rip" simplicity. But certainly takes a few more clicks for the more advanced users.

  • murkywater on 18/11/2012 - 15:34
    -6

    Just use Handbrake guys. It's free and ALOT more reliable/faster than all these commercial tools.

    For protected dvds: http://www.howtogeek.com/102886/how-to-decrypt-dvds-with-har…

    • shopaholic32 on 18/11/2012 - 16:34

      Did your Handbrake version work with latest DVD, just curious as if it does I wont mind giving it a go again as earlier versions did not work at all for many of my DVD.

    • wisc on 18/11/2012 - 20:30
      +4

      fair call/advice, but not really worth a neg i reckon…

  • [Deactivated] on 18/11/2012 - 16:51

    Ok so I didn't have a DVD ripper and gave this a test run and I can say it worked for what I wanted it to do.
    Gave ninjas scroll a test rip to psp res and did the job. Can't complain. Was using handbrake but failed at some rips.

  • G-Dawg on 18/11/2012 - 16:55

    Does anybody know how you'd rip individual episodes using this? Or is the idea to rip it and then use a separate piece of software to cut the thing into pieces?

  • abacus on 19/11/2012 - 00:05
    +1

    AFAIK once you get into the second screen where it asks you what format you want to rip to, if you decide not to proceed, then there is no cancel or back option and you need to force the program to close.

  • maccolar on 23/11/2012 - 14:16

    Handbrake is a nice free dvd ripper, you may download it for a try, it's totally free without any watermark and limitation
    http://free-dvd-ripper.reviewstown.com

Login or Join to leave a comment
Login Join