Whaddya know, the trim router is now reduced to $217 @ Bunnings. So, one could get the latter, which comes in hard case, and the plunge attachment from my previous post for $98, for the grand total of $315.
The RT0700CX2 combo is currently $369.
I'm a beginner as well, and although I have a Triton 2400w 1/2in router, I have found that I reach for this one more often as it is easier to handle. Bear in mind that the Makita is only 710 Watt, and has a 1/4in collet, so you'll be able to do almost everything, bar very heavy duty stuff.
ahh alright thanks heaps for the advice.
also love that this is classified under 'wireless router'!
I have both the Ryobi and the Makita.
Tbh, the Ryobi does everything the Makita can in 90% percent of situations.
Key differences are:
1. The Ryobi is really clunky to setup, takes much longer to get the depth right, change the bit, especially if using dust collection (those tiny screws are a nightmare)
2. The Makita is smaller and lighter, which often makes it easier to use
3. The Smaller base can get into tighter spaces
4. The Makita has a switch system, so easier to use as a router table - Ryobi you would need to tape the triggers, which is pretty unsafe.
Great price - i think i paid around $250
Thanks for this.
Would most agree that having a trim router in addition to a plunge router is very helpful?
Being a beginner on a budget means I was hoping to get one plunger to do it all but can certainly envision a larger plunge router being cumbersome to handle when simply chamfering a few edges here and there…
Now I have the Makita - I honestly can't remember the last time I used the Ryobi plunge.
Just generally never need the plunge function.
At that price, why wouldn't you go the 18v kit?
https://www.bunnings.com.au/makita-lxt-18v-brushless-cordles…
Good point, but the 18v is skin only, so unless you're already invested into the Makita 18v ecosystem, it is an additional expense.
That extra money could be spent on a better edge guide.
Yes i know it's skin only but if you're buying a router then it's obviously not your first tool and if you're buying a Makita router (and not your first tool obviously) then wouldn't you be in Makita's eco system? Or is this corded Makita a coveted router?
Not necessarily, my 18v drill and impact driver combo was DeWalt. Also, unless you had more than one battery of the brand, it can be a pain to keep changing the latter between the skins.
Some hobbyists source out the best value tool at the time, depending on what they can afford. And I suppose this may be just a case of testing the waters, so they may not be willing and/or able to invest in the ecosystem.
I can appreciate the value of a cordless set for a tradie though.
@DukeNinja: That's my point, go the 18v version for the ecosystem you are in, if you're buying specialty tools like this then you're working on decent projects and is an investment. If you're just going value then isn't there a much cheaper alternative like Ryobi or Ozito?
Ps. Genuinely asking all this by the way. I am in Makita ecosytem (as well as a few others) and have been eying the 18v router for some time.
@Villainous: From my experience, most batteries have programmed obsolescence. Plus the cost of the batteries are beyond my budget. Then you have the additional decision of what amperage hour battery to get, so one can easily spend a small fortune.
Most of my work will be around the home, so I will always have access to a power socket.
From my personal perspective and opinion, the only cordless tool that a lay person needs and would benefit from, is the drill/driver.
Horses for courses I guess.
Edit: And I have experienced the old "cheap is expensive", so I'd much rather get a Makita than an Ozito 🤣
assumptions dont make conclusions logical, I have a cordless drill, but I dont care to own cordless everything. A router is one thing I dont mind being corded, that doesnt mean I dont want the precision etc found in quality brands.
@Tuba: That's an assumption on your part. I had a corded Makita that I got rid of in favour of wanting to go cordless.
I asked a fair question and was hoping for some fair answers…
PS. You also keep editing your post. That's at least 3 times now.
@Villainous: Odd response. Apparently you think I just assumed what I want and desire. But that isnt what you did, your post was about everyone else.
I cant edit after you post…
@Tuba: Are you just serving yourself here? If you've got anything constructive to add to my question then please do. If not,…..
You want corded because corded, great, go ahead, thanks for sharing what you want but you've helped no-one. If it is in fact difinitively more precise than anything priced below as you are eluding then please educate us on your findings so you can actually add value to the community here.
@Villainous: LOL, way to over defend a mistake.
You were wrong, and now it appears you dont understand how comments work.
@Tuba: Still nothing to add about routers? Thought not. Glad you stopped by. We're all so well versed in routers now after your visit.
@Villainous: Do you even notice how hypocritical your comments are or does it go unnoticed? My comment first up, was conversing, but you took umbrage to that.
I never down voted or up voted but its nice to know it effects you enough to mention it.
@Villainous: Personally I have never used a cordless router and I wouldn't buy one unless all I wanted it for was to trim laminex, round off pine, or the likes.. My hefty corded Hitachi struggles on Tas-Oak/hardwood/eucalypt, so I imagine a cordless one would be pretty useless for anything serious like that..
Horses for courses, a Makita cordless may be fine for someone in that ecosystem that only wants to do light work, but for most people a Makita cordless router isn't practical, IMO..
@FLICKIT: As mentioned i did have a corded Makita although you're right i rarely used it (hence my questions). Cheers
@FLICKIT: cordless is handy for trades people eg people hanging doors for clients to route out hinges and things, but for longer duration work i prefer cordless because at my own home i always have a power lead, and don’t have to worry about it bogging down as battery flattens.
$379 + a battery and charger!, so around double the price or more hey?
Replied above…
Because battery
Replied above…
My longer reply then is that batteries don't last but corded will still be going in 20 years.
Cordless drill I couldn't do without. But saws and routers I don't see the point.
@bmerigan: Drills, saws, grinders, the cord exit out behind you and the tool but with a corded router i always found it in the way.
Also my old Makita had missing unreplaceable parts and cracked casing that cant be replaced. A battery you can always replace or adapt even the older style. The depth adjustment was also a pita to adjust. Some tools are just not meant to be held on to forever. But i get you prefer a corded router.
If you need to grab makita tools, sydney tools has a makita roadshow on that ends tomorrow, if you need a batter+charger kit, this one is pbly better value, although it is $1000, you get 200 store credit, bonus sander, b/less planer and vacuum
I wish one of those hardware stores would do a deal on on the DeWalt DCW604N-XJ router combo. It seems it never gets discounted. Funny Bunnings doesn't stock it either.
If Bunnings doesn't stock it then it's most likely a higher grade tool
Bunnings actually has the DeWalt router unit only but without the plunge attachment combo:
https://www.bunnings.com.au/dewalt-8mm-18v-xr-li-ion-brushle…
Does it support 5-Ghz?
No. It's safe for work.
5e-7 GHz (30k rpm) 😉
Best to call Telstra?
Misleading title. This is not a plunge router at all (as mentioned the plunge attachment is an extra add on)
Edited.
Great trim router. I built a mini router table for mine and use it heaps more than my full size table with giant Triton router. Great tool to have in the arsenal.
Nice! Would you be willing to share the plans? Thanks.
It was an organic build. I can post pics. Will take some snaps for you.
Yes please, that would be great!
Just went into bunnings to purchase.. Has gone back to $259… Spewing…
Back down to $217.
Is this a good router for a woodworking beginner?
I was considering the ryobi plunge router (https://www.bunnings.com.au/ryobi-1600w-plunge-router_p62106…) as it's cheap and so far my ryobi tools have been reliable.
Would love to hear from some experienced folk on the subject…