I cant even get the IO shield in. its so hard, I have half top in but the bottom half wont get in
RIP
So is there anywhere to go for something to build my pc? I have the parts already.
Got it in now cant get motherboard to lineup with the screws lol
nvm the IO wont fit in probably on the top.
already cut my finger, I give up.
going to Airtasker
thanks, got a offer for 80 might take it
get the $25 airtasker credit that they hand out in CBD
how?
$80 to build a pc??? I have done so many for free for friends!…
I’ve fixed friends cars fir free, doesn’t mean I’m giving away my time to fix strangers cars for nothing.
$35 would be more reasonable for a person without 'shop' running cost. It takes only 20 minutes for a skilled PC builder to assemble and route the cables nicely.
Free? You're so generous! I charged 200 to plan, order, build and set up the software for multiple friends lol.
install IO shield from inside
slit the lip against the case from top
and push the bottom till it clicks in
you can jamb it harder, no harm
use the back of screwdriver to jamb it in
Eagerly awaits the "Shit those things are sharp! How do I stop the bleeding?" post.
got it in finailly but cant get the motherboard to line up lol
If the holes dont match the parts on the motherboard then you have the io shield in the wrong way, if they do match but its not slotting in nicely then check the little metal grounding tabs that point off the inside of the IO shield around the USB ports and the ethernet port, often these bend and interfere with inserting the motherboard if you didn't get it in first try. Often if they are bent past 90 degrees they will stick inside the ports of the motherboard. Ensure that they are at 30-45 degrees to ensure that they seat properly against the metal face of the ports. It can be fiddly.
You sure that is the way it should go in? Sometimes they arent meant to be jammed in
what area you live in?
VIC, Dandenong
Building a PC Was a Mistake Thinking I could build a PC was a mistake
MSY computers would build your computer from your own parts for a fee.
they dont, already asked
Damn - they did it for one of my computers a few years ago. I had bought a few parts from them though (and others).
There are thousands of youtube tutorial videos. Just take your time and don't rush things, you'll be fine.
Don't rush things and read the instructions in each component manual.
If you still run into problems — then maybe it's time to post an AirTasker ad.
God speed, OP.
thanks yep i read them all, pretty sure i was doing it right its probably cause im weak lol im still waiting for my parts but i posted a ad anyway to see who I get
Unless you're Mr Burns, you should be able to fit the IO shield manually. I'd bet my last dollar you've lined something incorrectly.
If you read them all you should know you need to adjust the motherboard jacks location on the case to fit your motherboard's format.
I had the same problem, realised i had it back to front, and was trying to push it in so that the inside of the io shield was facing out of the case. Turned it around and it popped straight in with a bit of force on each corner. Don't give up!
Building my own PC was one of the most satisfying things I have done as I do not have a very good technical / hardware background.
Google and Youtube helped me greatly.
Where in Vic are you?
An hour and twenty minutes ago OP was in Dandenong.
Current whereabouts unknown.
Thanks, keep me posted.
Seriously, I used to build pc's to order. For someone at home I'd always recommend getting a system or laptop. In a shop it is enough trouble at times troubleshooting some issues. And it always takes a fair bit of time just to go through the routine of getting a dodgy part replaced. If you buy a system it is somebody else's problem for at least a year. After saying that, I do recommend anyone to IMAGE the system when you're happy with it. If you have to return something for a fix it will most likely come back with the original vanilla image. If you're like me you've probably spent hours getting rid of bloatware, configuring for speed etc, installing software that you want or need. So, save all that work. Image the c partition, and do a data backup as normal.
One advantage of troubleshooting in a shop is, if you suspect a hardware fault you can swap out the suspected dodgy hardware with something else of the shelf for testing. Generally you don't have that luxury at home.
Seriously, I've never had a PC made for me or charged people for doing it. For someone at home I'd always recommend reading one of the many guides, such as this one say https://www.tomshardware.com/reviews/build-your-own-pc,2601.… and build it yourself because 9 year old child can do it. The first one you build can just work but sometimes people run into issues. Seeing as it's basically just plugging parts into places that no other part will fit you can look at it as a puzzle to solve. Videos and online help are everywhere.
The second one will be much easier to build but you'll probably just be replacing parts as you go.
I think I destroyed a computer build when I was 9 and yes I was also following instructions too from a textbook, should have listened to my parents and not touch anything till I was a computer tech……the horrors….
Fast forward some years later and I tried again, trying to forget the past and what happened to the poor computer, and got it right the first time…and felt extremely satisfied that all went well…still not a qualified computer tech, but experience is better than a piece of paper saying your certified and qualified for this, right???
cant even get the IO shield in
They're usually fiddly (profanity) to get in.
I remember my first build, the IO was honestly fairly frustrating, not only did i forget to install it after i fitted in the motherboard, psu, gpu and cpu cooling, but when i did attempt to put it in took me a few attempts to fit it in right & definitely was frustrating, like others had said smack it in good.
But it is 100% worth it when you complete the build your self, the level of satisfaction and experience you gain building a PC is worth it.
I had LinusTechTips tutorial up in front of me the entire time going through each step.
If you can get yourself down as far as Hastings 3915 then I will help you if you want.
I used to build my own but lost interest.
MSY built my current computer, installed the OS, updated it, supplied a warranty, and all for just under $100 extra for labour, and no blood was spilled.
Great experience (except for the cut finger)
I used to build PCs for people but it was a pain in that you were on the hook forever for any issues.
Ah yes, the never-ending "But you were the last one to touch it so you must have done something to break it!" complaint.
I've gotten better, so now it's "What do you mean you won't fix my whatever?"
if they dont fit just duct tape them to the side of the tower. they dont have to fit to work, thats just cosmetic
Oh man, I've built plenty of PC's in my time from my first at 15 and was even an computer tech at one time but I've never heard of anyone having issues getting the IO shield in! It's just a rectangle slotting into another rectangle! You really need to use some force on it but that's about it. I recommend you go ahead with your plan for Airtasker because trust me the cables are gonna get you.
Lol My first build didn't have a Shield because I built the whole thing and forgot it.
Ill be damned if I was removing it all to put on the shield.
What exactly does the shield do?? I've been wondering..
It's the metal plate to seal the back of the PC case because the mobo is not built with it in one piece. Otherwise you would see gaps all around the IOs of the mobo. I actually missed it when I built my pc last month and I had to uninstall the mobo. I was teaching my 10 year old son so it was a valuable lesson for him but a bit embarrassing to admit.
OP, you should have done more research before building your own PC. When I first built my own PC all by myself I read up from many PC sites. I still screwed up a few things and even got a dud mobo with a flat battery and the PC would fail to start after a few days.
Even with experience I still screw up a couple of things when I build another new pc last month. Installed everything but the CPU cooler/IO shield only to find that they should have been installed first before the mobo. LOL.
Anyway, if you are going Airtasker, watch and learn.
Airtasker.