Soundstream T7 1600w / 800RMS 12" Subs Now 65% off RRP $315 SoundStream @ SCE

THESE ARE 100% LOCALLY SOURCED PRODUCTS FROM SOUNDSTREAM AUSTRALIA AND COME WITH A FULL 12 MONTH MANUFACTURERS WARRANTY

AVAILABLE IN TWO CONFIGURATIONS

12” DUAL 2 OHM IMPEDANCE
http://www.supercheapeverything.com/soundstream-t7-122-dual-…

12” DUAL 4 OHM IMPEDANCE
http://www.supercheapeverything.com/soundstream-t7-124-dual-…

Type a description for this product here…It is that time again. Time for Tarantula subwoofers to evolve… Over the years, the Tarantula subs have encountered many changes. now soundstream is getting back to basics. No foo-foo, pretty parts that have no performance value. T7 is all about performance, period. From the High BL motor, to the heat extracting aluminum dust cap, to the lumpy cone, all the parts make sense and have a purpose. So, if you want to pay extra money for a pretty chrome or plastic shrouded woofer, go to the swap meet. If you want your money to pay for sheer performance, T7 is for you…
Product Highlights

Overcompensating Motor Structure for Increased Magnetic Strength
12mm T-Yoke & Top Plate Improve Low Frequency Dynamics
Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up
Pressed Aluminum Heatsink Dust Cap Absorbs Voice Coil Heat
Aluminum Dust Cap Fins Dissipate Heat & Strengthen Cone
Non-Magnetic Non-Resonate Die-Cast Aluminum Frame
2.5” 4-Layer Voice Coil w/ Large Gauge Wire Increases Power Handling
High-Temperature Tollerance Adhesives Resist Thermal Failure
Nickel Plated 8ga Spring-Loaed Compression Wire Terminals
Non-Transfer Spruce Pulp Cone w/ UV & Chemical Protection
High Density Polyether Foam Surround w/ UV & Chemical Protection
Dual Poly-Cotton Suspension Dampen Violent Accelerations
Stitched Voice Coil Leads Prevent Potential Damage
1-pc Gasket/Trim Ring w/ Concealed Mounting Holes Included
Product Specifications
T7.124
Fs (hz) 34.16
Qms 5.48
Vas (ft^3) 1.448
Cms (mm/n) 0.109
Mms (g) 199.1
Xmax 15
Xmech 22.5
Dia (in.) 10.08
Sd (in^2) 79.78
Vd (ft^3) 0.041
Qes 0.61
Re (ohms) 7.23
Z (ohms) 8
BL 22.56
Pe (watts) 800
Qts 0.55
No 0.258
1w/1m SPL 86.2
VC DIA (IN) 2.5
VC (Ohms) DVC4
M-vd (ft^3) 0.172
Cut-out 11.125
Depth 6.5

Product Specifications
T7.122
Fs (hz) 32.27
Qms 5.05
Vas (ft^3) 1.613
Cms (mm/n) 0.121
Mms (g) 200.6
Xmax 15
Xmech 22.5
Dia (in.) 10.08
Sd (in^2) 79.78
Vd (ft^3) 0.041
Qes 0.53
Re (ohms) 3.71
Z (ohms) 4
BL 16.81
Pe (watts) 800
Qts 0.48
No 0.279
1w/1m SPL 86.43
VC DIA (IN) 2.5
VC (Ohms) DVC2
M-vd (ft^3) 0.172
Cut-out 11.125
Depth 6.5