Stevesie76 » user profile

Make sure you check every screw is tight if you get one of these, including all the hotend screws under the shroud. QC isn't great.

Good result! Nice work :-)

You probably checked this, but this is often caused by build up of crud so the connector never hits that clicky notch, and you need to…

The KE.

Quite a few with loose screws, including on the hotend which has caused quite a few to leak. Mine were loose too, whole hotend was shifting…

You must have received one of the rare KEs that were put together properly.

My Imou cameras have been fine for the ~$30 I paid. App works ok, cameras also work well in AgentDVR.

Plain is a bonus. The RGB trend is an aesthetic abomination and needs to stop. In my totally unqualified grumpy old man opinion, of course.

3M 9541 with charcoal layer are good.

There's just one thin coax cable from the front main camera that powers it and gets signal from the camera.

I can't think of a reason it wouldn't work, but I'd do a bit of "using front cameras as rear cameras" research in case I've not thought of…

Good unit. Can also recommend the WM1 if you need a small, budget front only camera.

Great deal. Love mine.

I had no problems with the clear coat on mine. I used a low voc water based product.

Apparently charges at 100A too. Some are as low as 20, 50A is common.

Good deal. 100amp charge current is nice, I think they were 50amp previously.

They need to learn how to tighten screws at the factory, I know that much.

Don't get a Creality printer unless you want to learn how to repair and tune a 3d printer. The chances of getting a trouble free one a…

I think some will find them a little "bright" compared to the average speaker with the response not tilting down at the listening position.

I think a big reason for the high RRP is the industry safety approval/s that it has.

Yep the DIN midi cables are cheap too.

I bought a Eureka grinder from them, no issues at all. Can recommend.

It's kinda like Oeksound Soothe. Probably worth it if you don't mind having yet another plugin manager(Waves Central) on your PC. I'm over…

My $9.99 offer appeared today after waiting a week.

This deal is back for the Ankermake 5C. Seems to have very good print quality, decent speed. Lacks a screen, has non-standard nozzles.

The smaller ones sound great at really low volumes. I'd happily use these as home stereo speakers.

Either seem fine. A mate has the Elegoo 3 pro and loves it, I've seen the prints and it does a good job. I think either would be fine. If…

The new V3 SE is on sale or the elegoo Neptune Pro 3 can be had for around $250 with eBay deals.

All the Korg plugins are half price as per usual around this time of year. If you like your late 80s electronic sounds the M1 plugin sounds…

You'd probably still get ~$50-75 for it if it works.