This was posted 4 months 10 days ago, and might be an out-dated deal.

Related
  • expired

Sunlu PLA+ 3D Printer Filament 1.75mm 1kg - 10 Spools for $185.50 Delivered (Buy 6 Get 4 Free) @ Sunlu Official eBay

51
Sunlu PLA+ 3D Printer Filament 1.75mm 1kg - 10 Spools for $185.50 Delivered (Buy 6 Get 4 Free) @ Sunlu Official eBay
Go to Deal
Cashback
Talla on 27/06/2024 - 08:50 ebay.com.au (315 clicks)
Last edited 27/06/2024 - 13:43 by 2 other users

Pay for 6 and get 4 free. Comes to around $18.6 per spool (1kg pla plus). Might vary slightly depending on the kind you choose. Discount applied to cart automatically after adding 10

Electrical & Electronics 3D Printer Filament

Related Stores

eBay Australia
eBay Australia
Marketplace
SUNLU
SUNLU

closed Comments

  • bob98 on 27/06/2024 - 08:51
    +5

    $18.60 isnt even that great imo

    • Commodore64 on 27/06/2024 - 09:04
      +5

      $12-14 is the sweet spot for PLA/PETG
      Usually you get that price by combining this deal above with the various 20% off promotions.

      • bob98 on 27/06/2024 - 09:05
        +1

        yeah im looking at 5kg petg for $75 or 10kg for $140 brings it to just under $15

        • Commodore64 on 27/06/2024 - 09:06
          +4

          Advice to all: HODL, unless you need it immediately

      • dibbz on 27/06/2024 - 09:28

        kingroon on ali is always around this price too. i got 10kg petg down to $108 recently.

        • bboz on 27/06/2024 - 10:25
          +1

          I've found that buying filament off AliE is getting extremely frustrating. Either they suddenly and mysteriously don't deliver to the address anymore - especially true of there is something cheaper - but a more expensive off from the SAME seller does deliver to Aus. Or you literally see the 'real' price momentarily until it switches to a much higher cost. Not sure if they are clamping down on Aus buyers or something but it's really annoying.

          • Commodore64 on 27/06/2024 - 11:05
            +2

            @bboz: EBay is easier and more consistent.
            Shipping is free, generally well tracked - and no taxes etc added

            • bboz on 27/06/2024 - 11:23

              @Commodore64: Agree but it's also true that AliE used to be different. I've bought from there before and there were no issues. Something's changed.

        • BewareOfThe Dog on 27/06/2024 - 18:53

          I just threw 8 rolls of Kingroon black petg out. It kept jamming, clogging the extruder.

  • dufflover on 27/06/2024 - 09:05
    +8

    Always wait for the regular eBay sale coupon with Sunlu and Jayo sellers.

    • Commodore64 on 27/06/2024 - 09:05
      +1

      I see this isn’t your first rodeo.

  • OzBargainer4Eva on 27/06/2024 - 09:11

    Any quality difference between Jayo and Sunlu by any chance? Thanks guys!

    • yellowrhino93 on 27/06/2024 - 09:14
      +2

      I tried jayo last time, it's was pretty much the same but cheaper and slightly bigger spool

      • Commodore64 on 27/06/2024 - 09:16
        +1

        Agreed. 10% more for same price (although it’s often a tad cheaper).
        The cardboard spool also seems like it could be more environmentally friendly

    • impoze on 27/06/2024 - 09:55
      +1

      same, sunlu listing sometimes has more colours and range in stock though

      both come in resealable bag with filament clip on plastic spools

    • igoforthebest on 27/06/2024 - 10:17
      +1

      Jayo is sister company of sunlu

  • drinkin-beer on 27/06/2024 - 09:48

    This is just their regular price, it's not a deal.

    The deal comes when they have a 20% discount promotion.

  • impoze on 27/06/2024 - 09:53
    +1

    regular price, wait for a restock and 20% promo

  • Ezekiel2320 on 27/06/2024 - 09:54
    +2

    I didn't love the sunlu filaments I got. Had to set the extrusion multiplier to 1.15 on basically all of them to get correct flow. Makes me wonder if they were even 1.75mm….

    Switched back to esun and every roll of filament is bang on 1.00 extrusion

    • Talla on 27/06/2024 - 09:55

      Did you use pla or pla+ from Sunlu?

      • Ezekiel2320 on 27/06/2024 - 09:59
        +2

        PLA+ in white, black, rainbow - don't rate the extremely glossy finishes. Looks cheap and nasty.

        PLA wood filament - extremely wispy and needs tonnes of post processing but nice enough finish.

        PETG in blue - left TONNES of glycol residue all over my hot end

    • impoze on 27/06/2024 - 10:17

      haven't had any issue with the PLA Meta

  • Jimothy Wongingtons on 27/06/2024 - 10:46

    just putting out there i saw on the jayo 3d store they have re-stocked most if not all of their usual offerings - will be buying up some translucent coloured ones in my next 10 i think, and 2-3 of the marble white - prints great, nice finish and much more fun than standard bright white.

    • Talla on 27/06/2024 - 12:18

      New to 3D printing here..is Jayo better then Sunlu?

      • igoforthebest on 27/06/2024 - 12:47
        +1

        Same factory

        • Jimothy Wongingtons on 27/06/2024 - 13:04

          but most believe sunlu to be better grade of filament. ymmv. i only had issues with jayo silk gold pla so far (apparently even the bambu official one has same issue) where feeding through ams sometimes throws up blockage errors (the waste filament aka poop is very thick) - the sunlu listings have some 'rarer' options like sakura pink or chocolate brown, and some nice two/three colour sometimes - which the jayo listings do not have.

          • igoforthebest on 27/06/2024 - 13:12
            +1

            @Jimothy Wongingtons: I havent noticed any differences, even the colour shades are exactly the same, I changed to a new filament from sunlu to jayo white and couldnt notice any difference

            • Jimothy Wongingtons on 27/06/2024 - 13:22
              +1

              @igoforthebest: nice good to know - my plan was always to buy just the ones that jayo didnt do in their ebay listings…and i mean lets face it - is there a point to shell out for extra for the common stuff?

Login or Join to leave a comment
Login Join