This was posted 9 months 11 days ago, and might be an out-dated deal.

Related
  • expired

QIDI X-Max 3 3D Filament Printer $1239 Delivered from AU Warehouse @ QIDI Tech, China

180
QIDI X-Max 3 3D Filament Printer $1239 Delivered from AU Warehouse @ QIDI Tech, China
Go to Deal
Quarn on 20/04/2024 - 16:31 qidi3d.com (817 clicks)
Last edited 22/05/2024 - 13:18 by 2 other users

This is a whole lot of printer for a great price, I paid $1600. Delivery may not be free to rural areas.
Fully enclosed Core XY printer with an active chamber heater and a build volume of 325x325x315
Nozzle temp up to 350c, bed temp up to 120c and chamber temp of 65c you can print a lot more exotic filaments
I've had mine for since 9/23 and love it. Qidi support is as good as people say it is.
Why? - Bambu and Creality were not big enough, or hot enough. Voron build was tempting but way more expensive and probably frustrating.
Yes you can print a full size helmet on this. No, it's not a Bambu. Yes, it runs Klipper. No, it does not have an AMS.
Ok release the Bambu fanboys now.

Edit: If you nearly complete a purchase but abort QIDI will email a discount voucher of $10
credit to @bamzero - the popup on visiting the page for 5% discount code for email signup appears to work, didn't complete checkout but applied code for a $61.95 discount bringing it down to $1177.05

Electrical & Electronics 3D Printer

Related Stores

Qidi Tech, China
Qidi Tech, China

closed Comments

  • bob98 on 20/04/2024 - 16:38

    have you had bambu before? how do these compare im looking for something along side my a1

    • kbw on 20/04/2024 - 17:01

      Knowing what you want out of the printer would help people recommend something suitable. More print volume? Chamber heater? Just need more print capacity without any extra fuss?

      This Qidi machine would suit the first two requirements, if you simply want an enclosure and the A1 is cutting the mustard otherwise you might just want to grab a cheap enclosure from eBay etc.

      • bob98 on 20/04/2024 - 17:28

        business is going well and im ready for a 2nd printer. i dont print abs yet but would like to be able to in the future. but after watching reviews on the qidi itll be a hard pass. i think i should just stick to bambu

        • Quarn on 20/04/2024 - 18:09
          +1

          The initial pre-release had issues, they recalled it and modified it. Make sure you are not looking at those reviews.

    • noisymime on 20/04/2024 - 17:35

      I've got the Plus 3, which is the little brother of this one, and IMHO its the equal of the P1S in every way except for the AMS.

      Print quality is fantastic, incredibly fast and pretty much set and forget so far (I've put about 5kg through it so far).

    • roller on 20/04/2024 - 21:38

      If your only experience of 3D printing is Bambus you’re better off sticking with them as it’s easy. There’s a bit extra to know with tuning and maintenance to get good and keep results from other printers. The Qidi is a great printer though… probably one of (if not) the best off the shelf enthusiast options.

  • RangaWal on 20/04/2024 - 16:40
    +1

    Reckon I would have bought one of these if not the P1S. Looks like a good unit.

    • bob98 on 20/04/2024 - 16:41
      +1

      the build size is making it very tempting.

      • RangaWal on 20/04/2024 - 17:31

        agreed - apparently also a very good printer

  • bob98 on 20/04/2024 - 16:41

    M3ZK

    $30 or so dollars off

  • impoze on 20/04/2024 - 16:43

    Tempting

  • noisymime on 20/04/2024 - 17:33

    I got the X-Plus 3 last December and have been super happy with it. Super fast and reliable prints, very much the equal of a P1S in my opinion. A nice thing with these is that they come with the hardened hot end too, which is an extra cost on the Bambu's, so if CF or other engineering materials are on your list then that's a consideration.

    • NigelTufnel on 20/04/2024 - 18:18
      +1

      Yeah I can vouch for the x-plus 3. It's a beast. Prints everything I've thrown at it so far with ease. PLA, PETG, TPU, ASA, ABS.
      Heated chamber really helps.
      And the x-max is just a carbon copy in a bigger size.

      Customer service is unreal as well. Responsive and will ship you parts basically no questions asked.

      Just be warned. This thing is a behemoth!

  • Jimothy Wongingtons on 20/04/2024 - 18:30

    Looks good mate

  • OzzyBrak on 20/04/2024 - 20:27

    How does this compare to the K1 max and is it open source?

    • roller on 20/04/2024 - 21:39

      Generally this is everything the K1 printers should have been and better for warp prone and exotic filaments.

      • OzzyBrak on 21/04/2024 - 08:39

        What about the K1 Max. It is a much better printer than the K1

  • Yekul on 20/04/2024 - 20:30

    Damn the Q1 Pro looks kinda epic for the price point too. Is it essentially a smaller version of this one or is there a lot of major differences? Seems to offer a lot of value for money!

    • NigelTufnel on 20/04/2024 - 22:16

      Yeah, it's hard to go past if you don't need a bigger bed.
      Basically a smaller version of this with some upgrades like auto z-offset and looks to potentially be setting up for an AMS system (poop bucket and nozzle cleaner)

    • impoze on 20/05/2024 - 14:33

      did you go for the Q1 Pro?

  • bamzero on 21/04/2024 - 04:12
    +1

    Man, tempting… if I hadn't recently bought a Neptune 4 Plus (though got that for just over $400 so still a big price difference.) I really did want a corexy though. Does this run bog standard Klipper or did they mess with it for no real reason like Elegoo?

    PS, the popup on visiting the page for 5% discount code for email signup appears to work, didn't complete checkout but applied code for a $61.95 discount bringing it down to $1177.05.

    • NigelTufnel on 21/04/2024 - 09:05
      +2

      Does this run bog standard Klipper or did they mess with it for no real reason like Elegoo?

      Messed with a little bit. But not too hard to put vanilla klipper on it instead, but you lose the screen. At least for now. The community is working on fixing that too.

  • bob98 on 23/04/2024 - 11:10

    im revisiting this im nearly sold. On the Wiki page for the max 3 theres 2 emails down the bottom for support. does anyone know if they have plans for a ams?

    Mailbox: [email protected]
    [email protected]

    • bamzero on 23/04/2024 - 12:20

      Here someone said they were told by support that a multicolour system was in the works. No details or timeframe though so if I was purchasing today I'd be under the assumption there wasn't going to be one.

      • impoze on 22/05/2024 - 09:33
        +1

        apparently 'AMS' stands for 'after market support'

        No plans for AMS

        • bamzero on 22/05/2024 - 09:44

          3D Chameleon it is then…

          • impoze on 22/05/2024 - 09:58

            @bamzero: cool, have you built one?

            I ordered Q1 Pro last night, used 5% email sign up, abandoned cart went up to 4%

            • bamzero on 22/05/2024 - 10:06

              @impoze: Nah but looks pretty good from the videos I watched.

              Never went above 5% for abandoned cart, and the original product isn't available anymore when clicking the link (though still available as different listing on site)

              Yesterday I did get a 30 day anniversary discount code though, $30 off $300+
              Good if only spending $300 I guess. Generic code, 30DAYSGIFT if it helps anyone.

  • bamzero on 23/04/2024 - 12:03

    Received another abandoned cart email offering 3% discount. Wonder if they'll beat the 5% signup offer if left long enough :D

    • bamzero on 06/05/2024 - 11:23
      +1

      If anyone is playing along at home, I'm up to 5% discount offer now (got 4% last week). Let's see if it goes to 6% next week.

      BTW deal should be unexpired as is still the same price.

      • Jimothy Wongingtons on 11/05/2024 - 15:30

        Did you get anything better was going to get p1s but might go extra for this?

        • bamzero on 11/05/2024 - 15:53
          +1

          They sent another 5% a few days later (different code each time) but looking back its every 3 to 4 days, sending the same % twice.
          Only been 2 days since the second 5% so maybe next day or so might get another, who knows.

      • impoze on 11/05/2024 - 17:57

        Doesnt the email sign up give you 5%?

        • bamzero on 11/05/2024 - 19:04
          +1

          Yep. Haven't achieved anything better here, just seeing if the trend of gradually increasing discounts continues.

Login or Join to leave a comment
Login Join